Lilin PIH - 7625 User manual

WDR D/N FAST DOME CAMERA
PIH-7625 D/DW Series
INSTRUCTION MANUAL
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com 66-7625DWCSE

CONTENTS
Preface
Features
Warning & Cautions
Structural Element
Fast Dome Camera Set Up
Installation
System Configuration
Operation
DIP Switch Setting
Fan Switch
Alarm Mode
Fast Dome Function Switch
Fast Dome ID Address Setting Refer Chart
Fast Dome Connection Jack and Cable Requirement
Indoor Installation Structural Drawing (Embedded and Attached Mounting)
Outdoor Installation Structural Drawing (Pendant Mounting)
Embedded Mounting (False Ceiling)
Attached Mounting (Fixed Ceiling)
Pendant Mounting (External Housing)
Fast Dome and Keyboard
Fast Dome, Matrix and Keyboard
Fast Dome with PC Control
Initial Power Up Inspection
Manual Operation
Fast Dome Pan/Tilt Control (Up, Down, Left, Right and Diagonal)
Fast Dome Selection
Zoom Lens Control
Focus Control
Iris Control
Horizontal 180 Instant Flip
Preset Position Setting
l
l
l
Selecting Fast Dome
Selecting Preset Position
Joystick Control
1
4
5
6
7
8
10
..........................................................................................................................
........................................................................................................................
.....................................................................................................
.......................................................................................................
................................................................................................
.................................................
9
...............................................................
16
.........................................................................
11
12
13
..............
....................................
.......................................................................
18
23
....................................................................
.......................................................................................
25
............................................................................
26
....................................................................................
27
....................................................................................
27
..................................................................................................
27
......................
28
.........................................................................................
28
...........................................................................................
28
..................................................................................................
29
......................................................................................................
Pages
8
....................................................................................................
8
....................................................................................................
8
..............................................................................
29
..............................................................................
29
29
30
............................................................................................
.....................................................................................
...............................................................................
30
...........................................................................................

2
l
l
l
l
Adjusting Lens
Setting Preset Dwell time
Setting Preset Speed
Storing Preset Data
Recalling Preset Position
Setting Preset Position Group
Changing Preset Data
Activating AutoPan
Deleting Preset Data
Alarm Management
Alarm Response Mode
Alarm Output
Menu Display
Preset
Preset Setting Menu Display
Preset Setting
Preset ID Setting
Dwell Time Setting
Preset Speed Setting
Scene File Menu Display
Deleting Preset Positions
Special Function Menu Display
Privacy Zone ON/OFF
Electric Zoom ON/OFF
Return Auto Pan Mode
Return Home Position
Camera Setting Menu Display
Expose Mode Setting
Expose Mode AE Setting
Shutter Speed Setting
Low Lux Mode Setting
Slow Shutter Setting
AGC (Auto Gain Control)
Back Light Compensation Setting
25X DW Fast Dome Function Setup (OSD Menu)
32
..............................................................................................
32
..............................................................................................
33
..............................................................................................
33
.................................................................................
44
.................................................................................
42
43
44
................................................................................
.....................................................................................
...............................................................................
46
......................................................................................
48
..............................................................................
48
..................................................................
30
.....................................................................................
30
.......................................................................................
31
............................................................................................
30
.......................................................................................
31
.................................................................................
32
...............................................................................................
31
.......................................................................................
34
........................................................................................................
35
.............................................................................................
34
34
35
...................................................................................................................
............................................................................
.................................................................................................
38
.......................................................................................
37
37
38
..........................................................................................
.......................................................................................
.................................................................................
39
..............................................................................
39
.....................................................................................
30
.....................................................................................
40
...................................................................................
41
.....................................................................................
42
.....................................................................................
.................................................................................
45
................................................................................................................................................................

3
Expose Mode AE Shutter Setting
Expose Mode WDR Setting
Zoom Speed Setting
Focus Speed Setting
Iris Speed Setting
Auto Iris Setting
IR Cut Filter Setting
IR Sensitivity Setting
l
l
l
l
l
l
l
l
l
l
l
Expose Mode Manual Shutter Setting
White Balance Setting
Gamma Function Setting
Special Function Setting
Special Function Menu Display
Pedestal Level Setting
Aperture Level Setting
Image Setting
Factory Initialization
Lens Control
Auto Focus Setting
Operational
Camera
Optical Zoom Lens
Electrical
Environmental
Mechanical
External Housing
Quick Reference Table
Trouble Shooting
Installation Kit
Specification
Appendix A
Appendix B
57
.......................................................................................
58
.........................................................................................
58
.........................................................................................
63
....................................................................................................................
55
.......................................................................................
55
.................................................................................
55
......................................................................................
56
..................................................................................................
58
......................................................................................................
64
....................................................................................................................
55
......................................................................................
58
...............................................................................................
59
........................................................................................
60
..........................................................................................................
59
.............................................................................................
61
......................................................................................................
60
61
61
................................................................................................................
................................................................................................
..............................................................................................................
61
...........................................................................................................
62
...................................................................................................
58
............................................................................................
51
..........................................................................................
53
................................................................................................
51
....................................................................
59
........................................................................................
50
....................................................................
50
............................................................................

PREFACE
Based on Li-Lin's popular PIH-7625 series fast dome cameras, Lilin's Wide Dynamic Range
Fast Dome offer significant enhancement and refinements to bring you the most innovative
surveillance solutions.
Conventional cameras operate only within a narrow spectrum of light in one single frame,
producing image that either too dark or too bright in high contrast situations.
With state of the art technology, PIH-7625DW is able to deliver each field with dynamic shutter
speeds to create a sharp color image in all lighting conditions.
PIH-7625DW is the leading product in the industry offering the most advanced features such as
Preset ID, Dynamic Privacy Zone low speed shutter control and Digital Zoom. With all these
features, you can count on the PIH-7625DW to provide the most reliable surveillance solution.
Li Lin's Fast Dome series measure only 145mm (5.6") in diameter and is capable of making 360
degrees continuous rotation with a speed range of 0.18 to 360 degrees per second, ensures direct
and accurate target positioning. When required the dome can be quickly spun through 180
degrees, an important feature when something passes directly under the camera.
Up to 128 preset positions can be programmed and recalled with an accuracy of 0.25 degrees.
First 16 presets can be divided into 4 groups for auto touring with individual setting for speed
and dwell time.
Each Fast Dome has 6 alarm inputs (expandable to 64) can drive the dome to any position in
under second. A local alarm output can be configured as NO or NC and two types of alarm
response mode provide flexible alarm management. RS-485 control interface makes our fast
dome cameras easy to fit into our exist systems and compatible with other manufacturers's
control systems.
Li Lin's Fast Dome series are fully-functional and user-friendly. It will meet your need for a wide
range of surveillance applications.
4

l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Wide Dynamic Range (PIH-7625DW)
PresetNo./PresetID
Preset Scene File
Dynamic Privacy Zone
Digital Zoom
Memory Function : Mirror / Rotate / Filp / Capture
Low Speed Shutter
25X Auto Focus Lens
Build-in 25X optical zoom lens with focal length 3.8 ~ 95.0mm
Automatic / Manual Iris Control
360 continuous rotation
Up to 128 programmable preset positions
Preset positions auto scanning
Highspeed rotation and tilt, speed range varies from 0.18 /sec ~ 360 /sec
180 Horizontal Instant Flip
6 alarm inputs, 1 alarm output can be set as NO (normally open) or NC (normally close) for
each Fast Dome
Two types of alarm response mode: Lock Mode, Release Mode
Build in 1/4" CCD high resolution DSP colour camera:
1. Color / Mono Switch (IR Cut Filter)
ON Color
OFF Mono
AUTO When light drops below 10~15 lux, auto switch from color to mono; When
light exceeds 30~35 lux, auto switch from mono to color.
2. 480 TV Lines (Color) ; 520 TV Lines (Mono)
3. 0.1Lux (Color) ; 0.01Lux (Mono)
4. On-Screen Setup Menu
5. White Balance Control : Auto Correction , Auto Tracking , Fix (Indoor/Outdoor)
6. Back Light Compensation (On/Off)
FEATURES
5
7. Back Light Compensation Zone (Top , Bottom , Left , Right)
8. Auto Gain Control : 8dB (low) , 22dB (medium) , 36dB (high)
9. 8 levels Brightness Adjustment
10. 16 levels Content Adjustment
11. Aperture Correction Adjustment
12. Flickerless : On/Off
13. Sensitivity Enhancement : On/Off
RS-485 control interface
Up to 64 Fast Dome configuration
Compatible with PC control (protocol required)
12Vdc voltage input (power supply options: 90 ~ 260Vac or 24Vac)
Flexible Mounting: Indoor - embedded and attached types, Outdoor - with weather resistant
housing
l
l
l
l
l

Please read the manual before attempting installation or operation
1. Please be aware to the warnings and cautions notice.
2. Don't use any chemical detergent to clean the machine surface, use a damp cotton cloth
only. Regularly clean the dome cover to assure proper focus ability.
3. Please install the Fast Dome in a dry area, water and high humidity may cause damage on
internal parts. External housing should be used for outdoor installation.
4. Please use parts supplied by the manufacturer only, any unqualified part using in the
equipment may violate the warranty.
5. Avoid installing the equipment in an unstable area. Make sure the area is firm and stable.
Falling equipment may injure personnel and damage the equipment.
6. Do not install the equipment near any flammable gas. Violation may cause fire or injury.
7. Avoid running video cable and signal cable through or passing interference sources such
as video waves, broadcast station, power generator, elevator motor or high voltage area
..... etc. Violation may cause interference.
8. Make sure the power cable is properly fixed. Un-suitably fixed cable may cause serious
short circuit or fire.
9. Correct cable connection is important. Do not place any object on the connection cable
and change the cable if there is damage on cable. Violation may cause short circuit, fire
and injury.
10. Make sure ground is well connected to avoid damage caused by lightning.
11. Do not put any foreign objects inside the equipment and do not spray any liquid on
equipment. This will avoid short circuit damage.
12. Do not touch power connection with wet hands to avoid short circuit or electricity shock.
13. Do not apply smash-force on the equipment. Violation may cause damage.
14. Do not install the equipment in a location that may expose the equipment directly to
sunlight. Violation may cause colour fading or damage.
15. Do not install the equipment in high temperature or low temperature environment to
avoid damage. The normal operational temperature is between -5 C ~ +50 C.
16. Fast Dome contains high sensitive electric parts inside. Do not try to repair them without
qualified personnel.
17. Turn off the power immediately and contact the technician when the following occurs:
A. Damage on power cable or plug.
B. Water leak into the equipment.
C. Fast Dome can not be operated normally.
D. Equipment falling on ground or damage on external case.
E. Unusual occurrence.
18. Warning: Do not try to repair the equipment. Only a qualified technician may disassemble
and repair the equipment. Shut off the power before disassemble the equipment and don't
put power on unless the case is completely assembled.
WARNINGS & CAUTIONS
6

Dome Cover
Camera Case
Decoration Ring
RS-485 In / Out Jack
Alarm In / Out Jack
Video In / Out Jack
Power In Jack
Camera Base
STRUCTURAL ELEMENT
7

DIP Switch Setting
Fan Power Switch
Alarm Mode Switch
Camera Function Switch
Turn the number 2 switch to ON position to activate the internal fan. This will maintain the
temperature inside and make the electric parts longer life.
Alarm Mode can be set as Lock or Release mode. Turn number 1 switch to ON position to
choose Release mode. Turn number 1 switch to OFF position to choose Lock mode.
Fast Dome has 6 alarm inputs and 1 output, which can be set either NC (normally close) or
NO (normally open) mode. Turn number 2 switch to ON position to choose NC mode.
Turn number 2 switch to OFF position to choose NO mode.
For Function Setup, please refer to page 34.
Camera ID Switch
Camera Function Switch
Alarm Mode Switch
Fan Power Switch
FAST DOME CAMERA SET UP
8

Fast Dome ID Address Setting Refer Chart
Below is the address setting for camera 1~64:
Up to 64 Fast Dome Camera can be serial linking in one system.
Therefore each dome is addressing by ID switch located at the base of the Fast Dome.
15432 76 8
ON
1 5432 76 8
ON
1
1
2 3 45
ON
867
5432 76 8
ON
ON
1
1
5432768
2345 867
ON
1
1
2345
ON
867
5432 76 8
ON
76854321
12345
ON
867
ON
1
1
5432 76 8
ON
2345 867
ON
1
1
5432
ON
768
2345 867
ON
1
1
2345
ON
867
5432 76 8
ON
12 34 5 867
1
1
5432 768
ON
5432
ON
768
1
1
ON
2345 867
ON
5432
ON
768
1
1
1
8672345
2345
ON
867
5432 768
ON
1
1
5432 768
ON
2345
ON
867
1
1
ON
2345
ON
867
5432
ON
768
1
1
1
7685432
2345
ON
867
5432 768
ON
12345 867
ON
ON
12 34 5 867
1
1
5432 768
ON
5432
ON
768
1
1
ON
2345 867
ON
5432
ON
768
1
1
1
8672345
2345
ON
8
67
5432 768
ON
1
1
5432 768
ON
2345
ON
867
1
1
ON
2345
ON
867
5432
ON
768
1
1
1
7685432
2345
ON
867
5432 768
ON
12345 867
ON
ON
15432768
1
1
2345
ON
867
2345 867
ON
1
1
ON
5432
ON
768
2345 867
ON
1
1
1
5432768
5432 768
ON
2345
ON
867
1
1
2345
ON
867
5432 768
ON
1
1
ON
5432 768
ON
2345 867
ON
1
1
1
2345 867
5432 768
ON
2345
ON
867
1 5432
ON
768
ON
17 33 49 1
218
34 50
5135
193
5236
204
5337
215
5438
226
5539
237
5640
248
64
63
62
61
60
57
59
58
48
47
46
45
44
41
43
42
32
31
30
29
28
25
27
26
16
15
14
13
12
9
11
10
9

Fast Dome Connection Jack and Cable Requirement
1. Power In Jack
2. Video Out BNC Jack
3. Alarm In / Out Jack
4. RS-485 In / Out Jack
DC12V Input Voltage, Power Consumption 1.2Adc, Center Pin 2.0mm
Require Cable: 18 AWG x 2C
Video Signal Output CVBS 1.0Vpp 75 BNC
Recommend Data Cable: 5C2V
Each fast dome contains 6 alarm inputs and 1 alarm output
Alarm Input Voltage 5.6Vmax, Output 0.5A 120Vac / 1A 24Vdc
Recommend Data Cable: UL 26 AWG 80 C 300V
RS-485 Input (TXDI+,TXDI-) to receiver signal from keyboard, matrix, DVR or
multiplexer through twisted pair cable.
RS-485 Output (TXDO+,TXDO-) sending out signal to next fast dome through twisted pair
cable.
Recommend Data Cable: 2547 VW-ISC UL 24 AWG x 2C
Transmission Distance: Max. 1 Kilometer
When 24VAC PSU is used, the recommend cables are:
UL SPT-1 VW-1 18AWG x 2C
UL SPT-2 VW-1 18AWG x 2C
UL SUT 105 C VW-1 18AWG x 3C
The distance between 24Vac PSU and fast dome can not exceed 200 meters.
Center Pin
UL 24 AWG 80 C 300V
(Alarm Input) (Alarm Output)
10

Indoor Installation Structural Drawing
Embedded Mounting Attached Mounting
INSTALLATION
11

Outdoor Installation Structural Drawing (Pendant Mounting)
12

Embedded Mounting (False Ceiling)
lDrill a 3/32" (2.4mm) hole at the center of
the chosen area.
lUseapencilandacompassestomarka
circle 6.7" (170mm) in diameter and cut
the circle.
lAttach the ring to ceiling lRing size and screw
location
lTighten the three tapping
screws into the ceiling or
three machine screws with
three screw nuts
lTurn the dome cover
counter clockwise
lSeparate the dome
cover from camera
Step 1 Ceiling Preparation
Step 2 The Ceiling Ring
Step 3 The Fix Ring
13
lPutonthethreeL
shape screw nuts
lTighten the three
black screws into
the screw nuts
lAttach fix ring
with screw nuts

lUnplug the
connection cable
Setting Fast Dome ID
Setting Alarm Mode
Setting Fan Power
Refer to page 8,9 for the setting
lUntighten the three
screws from the base
lSeparate the camera
body and base
lTurn the camera
body counter
clockwise
lReconnect the
connection cable
lTighten the three
screws to fix the
camera body
lAttach camera
body to base
lTurn camera body
clockwise to tight
position
Step 4 Camera Setting
Step 5 Attach the Camera Body and Base
14
lConnect RS-485
cable
lConnect alarm
output cable
lConnect video
signal cable
Step 6 Connection

lPut on decoration
ring
lTurntheringclockwise
to tight position
lPut camera body and
the fix ring into the hole
lTighten three
black screws
lTurn the camera body
clockwise to tight position
lAttach dome cover
to camera body
lTurn the dome cover
clockwise to tight position
Step 7 Install Camera Body and Decoration Ring
Step 8 Install The Dome Cover
15
Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover.
Unclean dome cover may affect camera performance.

lTurn the dome cover
counter clockwise
lUntighten the three
screws from base
lSeparate the dome
cover from camera
lTurn the camera cover
counter clockwise
lUnplug the
connection cable
lSeparate the camera
body to the base
lAttach base to ceiling lBase size and
screw location
lTighten the three
tapping screws into
the ceiling
Attached Mounting (Fixed Ceiling)
Step 1 Fix The Base
Step 2 Camera Setting
Setting Fast Dome ID
Setting Alarm Mode
Setting Fan Power
Refer to page 8,9 for the setting
16

lConnect RS-485
cable
lConnect alarm
output cable
lConnect video
signal cable
lReconnect the
connection cable
lTurn camera body
clockwise to tight
position
lAttach camera body
to base
lPut on decoration ring to base lTighten the three screws
lPutondomecover
to camera body
lTurn dome cover clockwise
to tight position
Step 3 Attach Camera Body and Base
Step 4 Connection
Step 5 Install Decoration Ring
Step 6 Install Dome Cover
17
Note : After dome cover is attached, use glass-cleaning cloth to clean dome cover.
Unclean dome cover may affect camera performance.

lPutthePSUintothe
box
lTighten2screwsto
fix the PSU
lPut PSU into the box lPut the clamp on PSU lTighten2screwsto
fix the PSU
Pendant Mounting (External Housing)
Step 1 Separate PSU and Bracket
Step 2 Install Power Supply Unit
1.1 When use 24Vac power source:
1.2 When use 90 ~ 260Vac power source:
18
Step 3 Install the Power Box
Untighten the screws
from PSU box
Untighten and pull out
the bolt from the hinge
Separate the housing
and PSU box
Untighten the screws
from PSU box and
open it. (Swan Neck)
Drill 4 holes on
desired locations
Tighten4screwstofixthepowerbox
(These four screws are not supplied.
User must prepare their own screws.)
Drill holes on the
intended positions of
of the wall. (Goose Neck)
70
70 50.8
50.8
45
10
8

GND
NO
NC
COM
6 5 4 3 2 1
GND
TXDO-
TXDO+
TXDI-
TXDI+
lUntighten the left
knob, put the AC
power cable through
the hole and tighten
the knob
lConnect the AC
power cable to AC
Input jack
lConnect the AC
power cable(below)
to AC Output jack
lConnect the DC
power cable(above)
to DC Input jack
Step 4 Connection
4.1 Connect AC / DC cables:
19
4.2 Connect Video cable:
Connect the video
cable to output jack
Untighten the middle
knob, put the video
cable through the hole
and tighten the knob