Linak CH01 Operational manual

PRODUCT DATA SHEET
BATTERY CHARGER
CH01
Features:
• For charging the batteries of CB08-XA and all
jumbo types, directly connected to the control
box or via the handset HB40A (must not be used
with BA18)
• Mains: 100 - 240 VAC / 50-60 Hz switch mode
power supply
• Charging voltage: 27.6 VDC ± 2%
• Charging current: Max. 500 mA
• Colour: Black
• Cable: 2000mm with straight or angled DC-plug
(5.5 x 2.5)
• Switch mode principle
• Interchangeable with CH08
• Green LED for power on
• Yellow LED for charging function
• Medically approved according to IEC 60601-1 only
when used with straight DC plug
The CH01 Battery Charger gives the possi-
bilty to interchange the plug type with a
simple “slide on” operation.
This gives great versatility and a logistical
advantage reducing stocks and costs.

Specifications subject to change without prior notice.
It is the responsibility of the product user to determine the suitability
of LINAK A/S products for a specific application. LINAK will at point of
delivery replace/repair defective products covered by the warranty
if promptly returned to the factory. No liability is assumed beyond
such replacement/repair.
Copyright © LINAK 2008.02 . MA M9-02-213-A . Chapter 10.17
Charging module: Part number: 10CH01S-00 (Straight plug)
10CH01A-00 (Angled plug)
Plug Adaptor unit: Part number:
English plug 00CH01UK-00
Australian plug 00CH01AUS-00
Euro plug 00CH01EU-00
U.S. / Japanese / UL plug 00CH01US-00
Shaver plug 00CH01IEC-00
English plugEuro plug Shaver plug
Australian plug
U.S. / Japan plug Charging module
Please order in multiples of 69 as there are 69 pieces in a box.