Linak HB40 Operational manual

PRODUCT DATA SHEET
HANDSET
HB40
Features:
• Handset for up to 4 actuators
• Only control current, max. 100 mA per channel
in the handset
• High-strength plastic housing
• Ergonomic design and easy-touch buttons
• Hook for easy placement
• 2.5 m straight cable
• Protection class: IP51. (HB44H for CARELINE IP54)
• Colour: black
Options:
• Protection class: IP65 or IP66 (Not HB40A)
• 0.5m/0.6m coiled cable or with extra long cable -
see ordering example
• Customised front cover
• Anti-slip rubber tip for placement on a flat surface
(special article)
• Colour: grey
Usage:
• Ambient temperature: +5º to +40° C
• HB40 is compatible with CB8-T, CB9..AX (not
CH.4), CB12 and CB18
• HB40A is compatible with CB8-A battery version.
Fitted with plug for battery charger CH08.
• HB40E is compatible with CB9Px (except CB9..
PM/PN) and CB14
• HB44H is only compatible with CB9..Ax (if CH.4)
4 channels
• HB40T is only compatible with CB7 (max. 2
channels)
The HB40 series handsets are designed for use
with LINAK®control boxes.
These sturdy compact units are ergonomically
designed and ideal for a vast range of applica-
tions from patient care beds and office furni-
ture to industrial and agricultural duties.
B4
4H for CARELINE IP54)
6
(
Not HB40A)
th
extra long cable -
nt
on a flat surface
C
AX
(not
ry
versi
on
o
.
H
08.
t
C
B9

* only for channels 1, 2 and 3
CB7 CB8 CB8A CB9..Ax CB9..Px
(not CB9..PM/PN
CB12 CB14 CB18
HB4xO x x* x x
HB4xA x
HB4xE x x
HB4xH x (4ch.)
HB4xT x
2 Up 2 Down
1 Up 1 Down
3 Up 3 Down
4 Up 4 Down
Dimensions:
Compatibility:
Channels as follows:

HB41000 - 000000
Cable: Black Grey
0015751 0015752
00914519 00914520
0015761 0015762
00914517 00914518
0015763 0015764
0015114
0015119 0015150
0015766 0015767
0015422
IP - rating: 0 = IP51
1 = IP65
2 = IP66-Washable
4 = IP54
Note: for HB4xA: IP 21
Colour: 0 = black
1 = grey
Front cover no: customer designed front cover
Special code: if not 00
Functionality: 0 = HB40-like
A = for use with CB8-A, (only HB41/42/43)
E = Matrix for use with CB14, CB9..Px (not CB9..PM/PN)
H = for use with CB9
T = for use with CB7 (only HB41/42)
No. of rows: 1 - 4
0 = 2500 mm, 9-Wire straight, 8 p. DIN plug
1 = 600 mm, 9-Wire coiled, 8-p. DIN plug
(HB43 and HB44)
2 = 500 mm , 6-Wire coiled, 8-p. DIN plug
(only HB41x, HB42x and HB43E)
3 = 500 mm , 6-Wire coiled, without plug
(only HB41 and HB42)
4 = 500 mm , 4-Wire coiled, 4p. Modular plug
(only HB41)
5 = 600 mm , 9-Wire coiled, 8p. DIN, extra long
straight end
9 = 600 mm , 5-Wire coiled, 8p. Modular plug.
(only CB7)
Choice of rubber tip to be specified separately (special article).
HB40
Ordering example:
Overview for HB4x functionality: 0, A, E, H, T.
HB41 0/A/E/H/T HB42 0/A/E/H/T HB43 0/A/E/H HB44 0/E/H
4U
3D
2U
4D
3U
2D
1U 1D
3U 3D
2D
1D
2U 2D
1U 1D1U 1D
2U
1U

Specifications subject to change without prior notice.
It is the responsibility of the product user to determine the suitability
of LINAK A/S products for a specific application. LINAK will at point of
delivery replace/repair defective products covered by the warranty
if promptly returned to the factory. No liability is assumed beyond
such replacement/repair.
Copyright ® LINAK 2007.09 . MA M9-02-100-L . Chapter 9.1
HB42-130 HB42-039 HB42-040 HB43-000 HB43-002HB42-999
HB42-001 HB42-004HB41-000 HB41-098 HB42-000HB41-999
HB40 Standard front covers:
When ordering check that the handset functionality corresponds to the symbols on the front cover.
The last 2 digits in the front cover code are to be used in the ordering example (xx).
HB43-032 HB44-056HB44-000 HB44-999HB43-999