Lincat L3 Operating instructions

IS346 ECN3219
User and Installation Instructions
Electric Fume Filtration Units
L3 and L4

IS346 ECN3219
Dear Customer
Thank you for purchasing this Lincat product.
With correct use and careful maintenance as described in these instructions,
your Lincat product will give years of trouble free use.
We produce over 450 different items of catering equipment and our range is
constantly being extended and improved. Find out more about Lincat products
from your local distributor or direct from us.
CONTENTS
CONTENTS ..................................................... Error! Bookmark not defined.
SAFETY INFORMATION.................................................................................3
DELIVERY CHECKLIST ..................................................................................3
TECHNICAL SPECIFICATION ........................................................................4
INSTALLATION ...............................................................................................4
OPERATION....................................................................................................6
CLEANING ......................................................................................................7
MAINTENANCE...............................................................................................8
SPARE PARTS................................................................................................8
SERVICE INFORMATION ...............................................................................9
GUARANTEE...................................................................................................9

IS346 ECN3219
SAFETY INFORMATION
To prevent injury to yourself or your staff, and to avoid
damaging the product, please read and follow the safety
precautions below before setting up and using the unit:
•Remove all plastic coatings and clean the unit before use.
•Ensure that the electrical supply cable is not damaged. If it is, it
must be replaced by Lincat Ltd or by qualified personnel.
•Always disconnect the unit from the electricity supply before
servicing.
•The unit must be earthed.
•Do not try to modify this unit.
•Keep these instructions in a safe place for future reference.
DELIVERY CHECKLIST
•Electric fume filtration unit (With electrical supply cable and 10A
plug).
•User & installation instructions.
•Guarantee card.
•Aluminium filters (L3 x 2, L4 x 3)
•Carbon filters (L3 x 2, L4 x 3)
If an item is missing please contact your dealer

IS346 ECN3219
TECHNICAL SPECIFICATION
Model ECO8 ECO9
Model L3 L4
Width mm 915 1295
Depth mm 610 610
Height mm 545 545
Power Rating kW 0.35 0.4
Net weight net kg 30 40
INSTALLATION
•Remove the protective plastic coating from all metal surfaces.
•Unlatch the front flap and slide out the filters.
•Ensure that the wall on which the filtration unit is to be fitted is suitable for
supporting the appliance via the masonry plugs.
•Ensure ample room ventilation with no cross draughts (7 – 10 air changes
per hour.)
•Install the filtration unit so that there is an air space above it, with the front
lower edge of the canopy about 800mm above the cooking surface. The front
edge should overlap the cooking area by approximately 100mm.
•For safety regulations the plug or means of disconnection must always be
accessible
•Using a no.4 masonry drill, drill holes in a suitable wall as shown in Fig 1. for
the L4 and Fig 2. for the L3. Insert rawl plugs into holes. Hang the unit onto
screws in the bottom row of holes and then secure in place by screwing
through the fan covers into the top row of holes.

IS346 ECN3219
Fig 1.
14.0 317.0
14.0
50.0
304.0
51.0
14.0
317.0
14.0
345.0405.0345.0
74.9
Fig 2.
15.0 304.0
65.0
317.0 14.0
75.0
715.0

IS346 ECN3219
CONNECTING TO THE ELECTRICITY SUPPLY
The unit must be earthed
Check that the voltage of your electricity supply corresponds to the voltage
shown on the serial plate
The product is supplied with a 10 amp plug. If replacing the plug, connect the
terminals as follows:
−Green and yellow wire Earth E
−Blue wire Neutral
N
−Brown wire Live L
OPERATION
•Plug the unit into the mains supply.
•Turn the power switch on as indicated in Fig 3, the fans will run until the unit
is switched off.
•To use the lights, turn on the light switch as indicated in Fig 3.
Figure 3.
FRONT VIEW


•This unit is fitted with a safety thermostat which will cut power to the fans in
the event of a fire. To re-set the safety thermostat, press in the button as
indicated in Fig 4.

IS346 ECN3219
Figure 4.




CLEANING
Important: Take care not to damage the thermostat capillary when cleaning.
Clean the unit regularly to maintain efficient performance and hygiene.
Disconnect the unit from the electricity supply and allow to cool before starting to
clean
Use a mild detergent in hot water and a soft cloth.
Do not allow excess water to run into the unit.
Do not use abrasive creams or scourers.
Burnt-on food may be removed using Carb’n’off or similar cleaner

IS346 ECN3219
MAINTENANCE
The parts listed below can be replaced by the user. No other regular
maintenance is required.
Lamp Bulb
•Ensure that the unit is turned off and unplugged from the mains.
•Carefully prise glass cover off using a small flat bladed screwdriver.
•Replace old bulb.
•Re-fit glass cover.
Filters
•Ensure that the unit is turned off and unplugged from the mains.
•Release the 2 suitcase latches and open the door.
•Slide filters out of unit and replace with new ones.
•Close and secure door.
SPARE PARTS
Description Part No L3 L4
On/Off switch SW66 1 1
Light Switch SW70 1 1
Light Bulb LA08 2 2
Safety Thermostat TH73 1 1
Centrifugal Fan FA25 2 3
Power Cable, Plug & Lead PL201 1 1
Suitcase Style Latch SU15 2 2
Aluminium Grease Filter FI11 2 3
Charcoal Filter FI13 2 3
Foam Pad Filter FI15 2 3

IS346 ECN3219
SERVICE INFORMATION
For help with the installation, maintenance and use of your Lincat equipment,
please contact our service department:


UK: 01522 875520
All service work, other than routine cleaning should be carried out by one of our
authorised service agents. We cannot accept responsibility for work carried out
by other persons.
To ensure your service enquiry is handled as efficiently as possible, please tell
us:
•Brief details of the problem
•Product code
•Type number
•Serial number
}
From serial plate
Lincat reserve the right to carry out any work under warranty during normal
working hours, ie Monday to Friday, 08:30 a.m. – 17:00 p.m.
GUARANTEE
This unit carries a comprehensive UK twelve-month warranty. The guarantee is
in addition to, and does not diminish your statutory or legal rights.
The guarantee does not cover:
Accidental damage, misuse or use not in accordance with the instructions in
these instructions
Consumable items
Damage due to incorrect installation, modification or unauthorised service work
The manufacturer disclaims any liability for incidental, or consequential damage.

IS346 ECN3219