Lincoln Electric PTH-C25A-SL-3MR User manual

IM2015
11/2021
REV09
LC PLASMA TORCHES
CONSUMABLES
&
ACCESSORIES
Lincoln Electric Iberia S.L.
Ctra. Laureà Miró 396-398
08980 Sant Feliu de Llobregat (Barcelona), Spain
www.lincolnelectric.eu

EU DECLARATIONOFCONFORMITY
Manufacturer and technical
documentation holder:
Lincoln Electric Iberia S.L.
Ctra. Laureà Miró 396-398
08980 Sant Feliu de Llobregat (Barcelona)
Spain
This declaration ofconformity is issued under the sole responsibility ofthe manufacturer.
Object ofthe declaration:
Welding Equipment
Plasma cutting torches
Product numbers:
PTH-C25A-SL-3MR, PTH-061A-CX-7M5A, PTH-061A-CX-
15MA, PTM-061A-CX-7M5A,PTM-061A-CX-15MA, PTH-
101A-CX-7M5A, PTH-101A-CX-15MA, PTM-101A-CX-7M5A,
PTM-101A-CX-15MA
The object of the declaration described above is in conformity withthe relevant Union harmonisation
legislation:
Is in conformity with Council Directives
and amendments:
Low Voltage Directive 2014/35/EU
RoHS Directive 2011/65/EU
References to the relevant harmonized standards used, and references to the othertechnical
specificationsin relation to which conformity is declared:
EN 60974-7: 2013 ; Arc Welding Equipment -Part 7:
Torches
Signed for and on Behalfof:
Lincoln Electric Iberia S.L.
Agnieszka Kujacz - Koralewska
Product Manager Equipment Welding Guns EMEAR
Barcelona, 22.06.2021

07/06
English
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE) and itsimplementation in
accordance with national law, electrical equipment that has reached the end of its life must be collected separately and returned toan
environmentally compatible recycling facility. As the owner of theequipment, you should getinformation on approved collection systems
from our local representative.
By applying this European Directive you will protectthe environment and human health!
Italiano
Non gettare le apparecchiature elettriche tra i rifiuti domestici!
In ottemperanza alla Direttiva Europea 2012/19/CE sui Rifiuti di Apparechiature Elettriche ed Elettroniche (RAEE) e la sua attuazione in
conf ormità alle norme nazionali, le apparecchiature elettriche esauste devono essere raccolte separatamente e restituitead una
organizzazione di riciclaggio ecocompatibile. Come proprietario dell’apparecchiatura, Lei potrà ricevere informazioni circa il sistema
approvato di raccolta, dal nostro rappresentante locale.
Applicando questa Direttiva Europea Lei contribuirà a migliorare l’ambiente e la salute!
Deutsch
Werf en Sie Elektrowerkzeuge nicht in den Hausmüll!
Gemäss Europäischer Richtlinie 2012/19/EG über Elektro- und Elektronik- Altgeräte (Waste Electricaland ElectronicEquipment, WEEE)
und Umsetzung in nationales Recht müssen verbrauchte Elektrowerkzeuge getrennt gesammelt und einer umweltgerechten
Wiederv erwertung zugeführt werden. Als Eigentümer diese Werkzeuges sollten sie sich Informationen über ein lokales autorisiertes
Sammel- bzw. Entsorgungssystem einholen.
Mit der Anwendung dieser EU Direktive tragen sie wesentlich zur Schonung der Umwelt und ihrer Gesundheitbei!
Español
No tirar nunca los aparatos eléctricos junto con los residuos en general!.
De conformidad a la Directiva Europea 2012/19/EC relativa a los Residuos de Equipos Eléctricos o Electrónicos (RAEE) y al acuerdo de
la legislación nacional, los equipos eléctricos deberán ser recogidos y reciclados respetando el medioambiente. Como propietario del
equipo, deberá informar de los sistemas ylugares apropiadospara la recogidade los mismos.
Aplicar esta Directiva Europea protegerá el medioambiente y su salud!
Français
Ne pas jeter les appareils électriques avec les déchets ordinaires!
Conf ormément à la Directive Européenne 2012/19/EC relative aux Déchets d' Équipements Électriques ou Électroniques (DEEE), et à sa
transposition dans la législation nationale, les appareils électriques doivent être collectés à part et être soumis à un recy clagerespectueux
de l’env ironnement. En tant que propriétaire de l’équipement, vous devriez v ous informer sur les systèmes de collecte approuvés auprès
nos représentants locaux.
Appliquer cette Directive Européenne améliorera l’environnement et la santé!
Norsk
Kast ikke elektriske artikler sammen med vanlig søppel.
I f ølge det europeiske direktivet for Elektronisk Søppel og Elektriske Artikler 2002/96/EC (Waste Electrical and Electronic Equipment,
WEEE) skal alt avfall kildesorteres og leveres på godkjente plasser i følge loven. Godkjente returplasser gis av lokale myndigheter.
Ved å følge det europeiske direktivet bidrar du til å bevare naturen og den menskelige helse.
Nederlandse
Gooi elektrische apparatuurnooit bij gewoon afval!
Met inachtneming van de Europese Richtlijn 2012/19/EC met betrekking totAfval van Elektrische en Elektronische Apparatuur (Waste
Electrical and Electronic Equipment, WEEE) en de uitvoering daarvan in overeenstemming met nationaal recht, moet elektrische
apparatuur, waarvan de levensduur ten einde loopt, apartworden verzameld en worden ingeleverd bij een recyclingbedrijf,dat
overeenkomstig de milieuwetgeving opereert. Als eigenaar van de apparatuur moet u informatie inwinnen overgoedgekeurde
verzamelsystemen vanonze vertegenwoordiger terplaatse.
Door het toepassenvan deze Europese Richtlijn beschermt u het milieu en iedersgezondheid!
Svenska
Släng inte uttjänt elektrisk utrustning tillsammans med annat avfall!
Enligt Europadirektiv 2002/96/EC ang. Uttjänt Elektrisk och Elektronisk Utrustning (Waste Electrical and Electronic Equipment, WEEE)
och dess implementering enligt nationella lagar, ska elektrisk utrustning som tjänat ut sorteras separat och lämnas till en miljögodkänd
återv inningsstation. Som ägare till utrustningen, bör du skaffa information om godkända återvinningssystem från dina lokala myndigheter.
Genom att följa detta Europadirektiv bidrar du till att skydda miljö och hälsa!
Polski
Nie wyrzucać osprzętu elektrycznego razem z normalnymi odpadami!
Zgodnie z Dy rektywą Europejską 2012/19/EC dotyczącą Pozbywania się zużytego Sprzętu Elektrycznego i Elektronicznego (Waste
Electrical and Electronic Equipment, WEEE) i jej wprowadzeniem w ży cie zgodnie z międzynarodowym prawem, zużyty sprzęt elektryczny
musi by ć składowany oddzielnie i specjalnie utylizowany. Jako właściciel urządzeń powinieneś otrzymać informacje o zatwierdzonym
sy stemie składowania od naszego lokalnego przedstawiciela.
Stosując te wytyczne bedziesz chronił środowisko i zdrowie człowieka!
Suomi
Älä häv itä sähkölaitteita sekajätteiden mukana!
Noudatettaessa Euroopan Unionin Direktiiviä 2012/19/EY Sähkölaite-ja Elektroniikkajätteestä ( WEEE ) ja toteutettaessa sitä
sopusoinnussa kansallisen lain kanssa, sähkölaite, joka on tullut elinkaarensa päähän pitää kerätä erilleen ja toimittaa sähkö-ja
elektroniikkaromujen keräyspisteeseen. Lisätietoja tämän tuotteen käsittelystä, keräämisestä ja kierrätyksestä saa kunnan
y mpäristöviranomaisilta.
Noudattamalla tätä Euroopan Unionin direktiiviä, autat torjumaan kielteiset ynpäristö- ja terveysvaikutukset!
Português
Não deitar fora o equipamento eléctrico juntamente com o lixo normal!
Em conformidade com a directiva Europeia 2012/19/EC relativa a Resíduos Eléctricos e Equipamento Eléctricos (REEE) e de acordo com
a legislação nacional, os equipamentos deverão ser recolhidos separadamente e reciclados respeitando o meio ambiente. Como
proprietário do equipamento, deverá informar-se dos sistemase lugares apropriadospara a recolha dosmesmos.
Ao aplicar esta Directiva Europeia protegerá o meio ambiente e a saúde humana!
Русский
Запрещается утилизация электротехнических изделий вместе с обычным мусором!
В соблюдение Европейской Директивы 2012/19/ECв отношении использованного электротехнического оборудования "Waste
Electrical and ElectronicEquipment" (WEEE) и исполнение в соответствии с региональным законодательством, элекротехническое
обору дование, достигшее окончания срока эксплуатации должно быть собрано на специальные площадки и утилизировано
раздельно на соответствующих участках (заводах) по утилизации. Вы, как владелец оборудования, должны получить
информацию об сертифицированных площадках для сбора оборудования от нашего локального представительства.
Соблюдая Ев ропейскую Директиву по утилизации отработавшего электротехнического оборудования, вы защищаете здоровье
людей и окружающую среду от загрязнения!

This equipment must be used by qualified personnel. Be sure that all installation, operation, maintenance and repair
procedures are performed only by qualified person. Read and understand this manual before operating this equipment.
Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this
equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible
fordamages caused by improper installation, improper care or abnormal operation.
WARNING: This symbol indicates that instructions must be followed to avoid serious personal injury,
loss of life, or damage to this equipment. Protect yourself and others frompossible serious injury or
death.
READ AND UNDERSTAND INSTRUCTIONS: Read and understand this manual before operating
this equipment. Plasma cutting or gouging can be hazardous. Failure to follow the instructions in this
manual could cause serious personal injury, loss of life, or damage to this equipment.
ELECTRICALLY POWERED EQUIPMENT: Turn off input power using the disconnect switchat the
fusebox before working on this equipment. Ground this equipment in accordance withlocal electrical
regulations.
ELECTRIC AND MAGNETIC FIELDS MAY BE DANGEROUS: Electric current flowingthrough any
conductor creates electric and magnetic fields (EMF). EMF fields may interfere withsome
pacemakers, and welders having a pacemaker shall consult their physician before operating this
equipment.
CE COMPLIANCE: This equipment complies withthe European Community Directives.
WORK MATERIALS CAN BURN: Cutting generates a large amount of heat. Hot surfacesand
materials in workarea can cause serious burns. Use gloves and pliers whentouching or moving
materials in the workarea.
SAFETY MARK: This equipment is suitable for supplying power for cutting operations carried out in
an environment withincreased hazard of electric shock.
EQUIPMENT WEIGHT OVER 30kg: Move this equipment withcare and withthe help of another
person. Lifting may be dangerous for your physical health.
CYLINDER MAY EXPLODE IF DAMAGED: Use only compressed gas cylinders containing the
correct shielding gas for the process used and properly operating regulators designed forthe gas and
pressure used. Always keep cylinders in an upright position securely chained to a fixed support. Do
not move or transport gas cylinders withthe protection cap removed. Do not allow the torch, work
clamp or any other electrically live part to touch a gas cylinder. Gas cylinders must be located away
from areas wherethey may be subjected to physical damage or the cutting process including sparks
and heat sources. Cutting sparks can cause explosion or fire. Keep
flammables away fromcutting. Do not cut near
flammables. Have a fireextinguisher nearby, and
have a watchperson ready to use it. Do not cut on
drums or any closed container.
The plasma arc can cause injury and burns. Keep
your body away fromnozzle and plasma arc. Turn off
power before disassembling torch. Do not grip
material near cutting path. Wear complete body
protection.
Safety
02
/
05
WARNING

Electric shock fromtorch or wiring can kill. Wear dry
insulating gloves. Do not w ear wetor damaged
gloves. Protect yourself from electric shock by
insulating yourself from workand ground. Disconnect
input plug or power before working on machine.
Breathing cutting fumes can be hazardous to your
health. Keep your head out of the fumes. Use forced
ventilation or local exhaust to remove the fumes. Use
ventilating fan to remove fumes.
Arc rays can burn eyes and injure skin. Wear hat and
safetyglasses. Use ear protection and button shirt
collar. Use welding helmet withcorrectshade of filter.
Wear complete body protection.
Become trained and read the instructions before
working on the machine or cutting.
Do not remove or paint over (cover)the label.
Descripton
LC Plasma torches are designedfor plasma cutting and gougingmaterials including mild steel,
stainless steel, aluminum, brass &copper using the LINCOL ELECTRIC plasma cutters:
Product Number
Invertec® PC-
210
Tomahawk®
1025
Tomahawk®
1538
K12038-1
K12048-1
K12039-1
LC25 (Hand)
PTH-C25A-SL-3MR

LC65 (Hand)
PTH-061A-CX-7M5A

PTH-061A-CX-15A

LC65M (Machine)
PTM-061A-CX-7M5A

PTM-061A-CX-15A

LC105 (Hand)
PTH-101A-CX-7M5A

PTH-101A-CX-15A

LC105M (Machine)
PTM-101A-CX-7M5A

PTM-101A-CX-15MA


Technical specification
PN.
Method
of cutting
Rated
current /
Duty cycle
Type of gas,
flow rate
and/or
operating
pressure
Lengh
of cable
Type of
cooling
Max and
mini gas
pressure
(inlet)
Connection
PTH-
C25A-SL-
3MR
Hand
25 A @
60%
Air, 96 l/min
@ 5,0 bar
3 m
Air
4,8 bar /
6,0 bar
Direct
PTH-
061A-CX-
7M5A
Hand
60 A @
60%
Air, 130 l/min
@ 5,0 bar
7,5 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTH-
061A-CX-
15A
Hand
60 A @
60%
Air, 130 l/min
@ 5,5 bar
15 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTM-
061A-CX-
7M5A
Machine
60 A @
60%
Air, 130 l/min
@ 5,0 bar
7,5 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTM-
061A-CX-
15A
Machine
60 A @
60%
Air, 130 l/min
@ 5,5 bar
15 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTH-
101A-CX-
7M5A
Hand
100 A @
60%
Air, 280 l/min
@ 5,5 bar
7,5 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTH-
101A-CX-
15A
Hand
100 A @
60%
Air, 280 l/min
@ 5,8 bar
15 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTM-
101A-CX-
7M5A
Machine
100 A @
60%
Air, 280 l/min
@ 5,5 bar
7,5 m
Air
4,8 bar /
6,0 bar
Central
Connector
PTM-
101A-CX-
15MA
Machine
100 A @
60%
Air, 280 l/min
@ 5,8 bar
15 m
Air
4,8 bar /
6,0 bar
Central
Connector

LC25
LC25
Torch (Hand 3m) (1pc)
PTH-C25A-SL-3MR
Handle (1pc)
W0300601R
Head (1pc)
W0300615R
Cable (3m) (1pc)
W0300616R
Electrode
(blister 5pcs)
Gas Distr.
(blister 3pcs)
Tip
(blister 5pcs)
RetainingCap
(blister 1pc)
Spacer
(blister 1pcs)
Cutting process
25A
W03X0893
-75A
W03X0893
-5R
W03X0893
-76A
W03X0893
-77A
W03X0893
-78R

LC65
LC65
Torch (Hand 7.5m) (1pc)
PTH-061A-CX-7M5A
Torch (Hand 15m) (1pc)
PTH-061A-CX-15MA
Handle (1pc)
W0300609R
Head (1pc)
W0300608R
Cooling Kit (blister 1pc)
W03X0893-49R
Cable (7.5m) (1pc)
W0300604R
Cable (15m) (1pc)
W0300606R
Connector (1pc)
W03X0934-4R
Electrode
(blister 5pcs)
Gas Distr.
(blister 3pcs)
Tip
(blister 5pcs)
RetainingCap
(blister 1pc)
Spacer
(blister 2pcs)
Shield Cap
(blister 2pcs)
Cutting process
40A
W03X0893
-25A
W03X0893
-50R
W03X0893
-27A
W03X0893
-41A
W03X0893
-14R
50A
W03X0893
-25A
W03X0893
-50R
W03X0893
-28A
W03X0893
-41A
W03X0893
-14R
60A
W03X0893
-25A
W03X0893
-50R
W03X0893
-29A
W03X0893
-41A
W03X0893
-14R
Dir Contact
40A
W03X0893
-25A
W03X0893
-50R
W03X0893
-26A
W03X0893
-41A
Contact
50A
W03X0893
-25A
W03X0893
-50R
W03X0893-
33A
W03X0893
-43A
W03X0893
-44A
Contact
60A
W03X0893
-25A
W03X0893
-50R
W03X0893-
34A
W03X0893
-43A
W03X0893-
44A
Ext Contact
40A
W03X0893
-53A
W03X0893
-50R
W03X0893
-40A
W03X0893
-43A
W03X0893
-21A
Ext Contact
60A
W03X0893
-53A
W03X0893
-50R
W03X0893
-54A
W03X0893
-43A
W03X0893
-21A
Gouging
W03X0893
-25A
W03X0893
-50R
W03X0893-
39A
W03X0893
-43A
W03X0893
-48A

LC65M –LC65M GEAR RACK
LC65M
LC65M GEARRACK
Torch (Machine 7.5m) (1pc)
PTM-061A-CX-7M5A
PTR-061A-CX-7M5A
Torch (Machine 15m) (1pc)
PTM-061A-CX-15MA
PTR-061A-CX-15MA
Positioningtube (1pc)
W0300603R
W0300624R
Head (1pc)
W0300610R
Cooling Kit (blister 1pc)
W03X0893-49R
Cable (7.5m) (1pc)
W0300605R
Cable (15m) (1pc)
W0300607R
Connector (1pc)
W03X0934-4R
Electrode
(blister 5pcs)
Gas Distr.
(blister 3pcs)
Tip
(blister 5pcs)
RetainingCap
(blister 1pc)
Shield Cap
(blister 2pcs)
Cutting process
40A
W03X0893
-25A
W03X0893
-50R
W03X0893
-27A
W03X0893
-41A
50A
W03X0893
-25A
W03X0893
-50R
W03X0893
-28A
W03X0893
-41A
60A
W03X0893
-25A
W03X0893
-50R
W03X0893
-29A
W03X0893
-41A
Shielded
40A
W03X0893
-25A
W03X0893
-50R
W03X0893
-52A
W03X0893
-43A
W03X0893
-46A
Shielded
50A
W03X0893
-25A
W03X0893
-50R
W03X0893
-33A
W03X0893
-43A
W03X0893
-46A
Shielded
60A
W03X0893
-25A
W03X0893
-50R
W03X0893
-34A
W03X0893
-43A
W03X0893
-46A
Gouging
W03X0893
-25A
W03X0893-
50R
W03X0893
-39A
W03X0893
-43A
W03X0893
-48A

LC105
LC105
Torch (Hand 7.5m) (1pc)
PTH-101A-CX-7M5A
Torch (Hand 15m) (1pc)
PTH-101A-CX-15MA
Handle (1pc)
W0300609R
Head (1pc)
W0300618R
InsulationKit (blister 1pc)
W03X0893-71R
Cable (7.5m) (1pc)
W0300620R
Cable (15m) (1pc)
W0300621R
Connector (1pc)
W03X0934-8R
Electrode
(blister 5pcs)
Gas Distr.
(blister 2pcs)
Tip
(blister 5pcs)
RetainingCap
(blister 1pc)
Shield Cap
(blister 2pcs)
Cutting process
40A
W03X0893
-60A
W03X0893
-70R
W03X0893
-61A
W03X0893
-66A
W03X0893
-68A
60A
W03X0893
-60A
W03X0893
-70R
W03X0893
-62A
W03X0893
-66A
W03X0893
-68A
80A
W03X0893
-60A
W03X0893
-70R
W03X0893
-63A
W03X0893
-66A
W03X0893
-68A
100A
W03X0893
-60A
W03X0893
-70R
W03X0893
-64A
W03X0893
-66A
W03X0893
-68A
Contact
40A
W03X0893
-60A
W03X0893
-70R
W03X0893
-61A
W03X0893
-66A
W03X0893
-67A
Contact
60A
W03X0893
-60A
W03X0893
-70R
W03X0893
-62A
W03X0893
-66A
W03X0893
-67A
Contact
80A
W03X089
3-60A
W03X0893
-70R
W03X0893
-63A
W03X0893
-66A
W03X0893
-67A
Contact
100A
W03X089
3-60A
W03X0893
-70R
W03X0893
-64A
W03X0893
-66A
W03X0893
-67A
Ext Contact
40A
W03X0893
-57A
W03X0893
-70R
W03X0893
-58A
W03X0893
-66A
W03X0893
-74A
Ext Contact
60A
W03X0893
-57A
W03X0893
-70R
W03X0893
-59A
W03X0893
-66A
W03X0893
-74A
Ext Contact
80A
W03X0893
-57A
W03X0893
-70R
W03X0893
-72A
W03X0893
-66A
W03X0893
-74A
Ext Contact
100A
W03X0893
-57A
W03X0893
-70R
W03X0893
-73A
W03X0893
-66A
W03X0893
-74A
PREMUM: 100A
W03X0893
-101A
W03X0893
-103R
W03X0893
-107A
W03X0893
-112A
W03X0893-
109A
Gouging
W03X0893
-60A
W03X0893
-70R
W03X0893
-65A
W03X0893
-66A
W03X0893
-69A

LC105M –LC105M GEAR RACK
LC105M
LC105M GEARRACK
Torch (Machine 7.5m) (1pc)
PTM-101A-CX-7M5A
PTR-101A-CX-7M5A
Torch (Machine 15m) (1pc)
PTM-101A-CX-15MA
PTR-101A-CX-15MA
Positioningtube (1pc)
W0300603R
W0300624R
Head (1pc)
W0300619R
InsulationKit (blister 1pc)
W03X0893-71R
Cable (7.5m) (1pc)
W0300622R
Cable (15m) (1pc)
W0300623R
Connector (1pc)
W03X0934-8R
Electrode
(blister 5pcs)
Gas Distr.
(blister 2pcs)
Tip
(blister 5pcs)
RetainingCap
(blister 1pc)
Shield Cap
(blister 2pcs)
Cutting process
40A
PREMIUM
W03X0893
-101A
W03X0893
-102R
W03X0893
-104A
W03X0893-66A
W03X0893-112A
W03X0893-68A
W03X0893-110A
60A
PREMIUM
W03X0893
-101A
W03X0893
-102R
W03X0893
-105A
W03X0893-66A
W03X0893-112A
W03X0893-68A
W03X0893-110A
80A
PREMIUM
W03X0893
-101A
W03X0893
-102R
W03X0893
-106A
W03X0893
-112A
W03X0893-68A
W03X0893-110A
100A
PREMIUM
W03X0893
-101A
W03X0893
-103R
W03X0893
-107A
W03X0893
-112A
W03X0893-68A
W03X0893-111A
Gouging
W03X0893
-101A
W03X0893
-70R
W03X0893
-65A
W03X0893
-66A
W03X0893
-69A

LC105M –LC105M GEAR RACK
LC105M LC105M GEARRACK
Torch (Machine 7.5m) (1pc) PTM-101A-CX-7M5A PTR-101A-CX-7M5A
Torch (Machine 15m) (1pc) PTM-101A-CX-15MA PTR-101A-CX-15MA
Positioningtube (1pc) W0300603R W0300624R
Head (1pc) W0300619R
InsulationKit (blister 1pc) W03X0893-71R
Cable (7.5m) (1pc) W0300622R
Cable (15m) (1pc) W0300623R
Connector (1pc) W03X0934-8R
Electrode
(blister 5pcs) Gas Distr. (blister 2pcs) Tip (blister 5pcs) RetainingCap (blister 1pc) Shield Cap (blister 2pcs)
Cutting process
40A W03X0893-68A
60A W03X0893-68A
80A W03X0893-68A
100A
Gouging W03X0893
-69A
W03X0893-68A
W03X0893-68A
W03X0893
-60A
W03X0893
-60A
W03X0893
-60A
W03X0893
-60A
W03X0893
-60A
W03X0893
-70R
W03X0893
-70R
W03X0893
-70R
W03X0893
-70R
W03X0893
-70R
W03X0893
-61A
W03X0893
-62A
W03X0893
-63A
W03X0893
-64A
W03X0893
-65A
W03X0893
-66A
W03X0893
-66A
W03X0893
-66A
W03X0893
-66A
W03X0893
-66A

Torches Dimensions