Lincoln Electric WELDLINE PROTIG III S 10 User manual

EN
www.weldline.eu
LINCOLN ELECTRIC EUROPE S.L.
c/o Balmes, 89 - 8o2a- 08008 Barcelona - SPAIN
B) Work-station
Use only electrode holders and torches which are perfectly insulated.
The operator must be insulated from the ground-surface and the workpiece (gloves, safety shoes, dry
clothes, leather apron, and so forth...).
Do not touch the electrode wire and the part (or the nozzle) simultaneously.
C) Protection
It is absolutely essential that your protect your eyes from blinding glare (glare of arc invisible light and
infrared and ultraviolet radiation).
The welding mask, without or with helmet, must always be equipped with a protective filter whose
gradation depends on the welding arc current intensity (EN 169 Standard).
Fumes emitted during welding operations may be dangerous. Use adequate protection means (fumes
extraction, ventiled masks…)
Option : Adjustable head
For a good thermal contact
use a grease containing
copper.
Maintenance boxes
Extension
Technical data
Safety instructions
We thank you for your trust in our company by purchasing this equipment which will provide you with
complete satisfaction if you comply with its conditions for use and maintenance.
CAUTION: The company declines all responsibility in case of modification, addition of components
or subassemblies, or any transformation of the equipment carried out by the customer or a third-
party, without prior specific written agreement from the company.
Arc welding and plasma cutting may be dangerous for the operator and persons close to the work
area. Read the operating manual and safety instructions W000261712. See www.weldline.eu.
A) Maintenance / Troubleshooting
Before any internal verifications and repair work, make sure that the equipment is separated from
the electric installation by electrical isolation (by electrical isolation is meant a group of operations
designed to separate and keep the equipment de-energized).
At least every six months, you must check the proper condition of the insulation and connections of
the electric equipment and accessories such as plugs, flexible wires, ducts, connectors, extension
leads, part-holders, electrode-holders, or torches...
Maintenance and repair work on the jackets and insulating ducts must be carried out extremely
carefully.
Have defective parts repaired by a specialist, or better still, have them replaced.
Routinely check the proper tightening and cleanliness of the electric connections.
N°8695-8958
Rev3_12/2018 - PROTIG III S A
References of various models
PROTIG III S 5 m 8 m
10 RL W000382715-2 W000382716-2
20 RL W000382717-2 W000382718-2
30 RL W000382719-2 W000382720-2
40 RL W000382721-2 W000382722-2
Connection C5B original, complete with banana plug.
Index Reference Description
200 W000279381 Torch body bent, replacing the body PROTIG 10 and PROTIG 20
201 W000279383 - 125 A 35% Head PROTIG 10
202 W000279384 - 145 A 35% Head PROTIG 20
W000270829 Female connection M12x1. To connect power sources
not accepting the Quick Connection Gas
Reference Description
W000306441 WEAR PARTS BOX TIG 10
W000306442 WEAR PARTS BOX TIG 20
W000306443 WEAR PARTS BOX TIG 30
W000306444 WEAR PARTS BOX TIG 40
Reference Description
W000306135 EXTENSION AIR 15M
Instructions for safety, use and maintenance
TIG manual torch with natural cooling
PROTIG III S 10 20 30 40
Curent Duty cycle 35% 125 A 150 A 200 A 250 A
Duty cycle 60% 80 A 100 A 130 A 200 A
Light alloy welding, reduce the duty cycle about 30%
Voltage class L- 113V
Gas flow Mini : 7 l/min - Maxi 13 l/min
Using electrodes Ø 1.0 / 3.2 mm Ø 1.0 / 3.2 mm Ø 1.0 / 4.0 mm Ø 1.0 / 4.8 mm
Origin
equipment fitted
to the torch
Back Cap Long Long Long Long
Nozzle Ø 10 mm Ø 10 mm Ø 12 mm Ø 12 mm
Electrode Ø 1.6 L Ø 2.0 L Ø 2.4 L Ø 2.4 L
EN 60974-7
PROTIG III S
10 - 20 - 30 - 40

EN
www.weldline.eu
LINCOLN ELECTRIC EUROPE S.L.
c/o Balmes, 89 - 8o2a- 08008 Barcelona - SPAIN
Spare parts
Wear parts
Rep Reference Ø Wear parts
1
W000306220
Short back cap
W000306221
Medium back cap
W000306222
Long back cap
2
W000306229
Back cap O’Ring
3
W000306210
Sealing ring
4
W000306236
1.0
Collet
W000306237
1.6
W000306238
2.0
W000306239
2.4
W000265659
2.5
W000306240
3.2
5 W000306205
Standard
collet body
6
W000306269
6.4
Nozzle
W000306270
8.0
W000306271
9.6
W000306272
12.8
6L
W000306456
4.8
Long
Nozzle
W000306457
6.4
W000306458
8.0
W000306459
9.6
8 W000306213
Gas Lens
collet body
9 W000306218
Gas Lens filter
10
W000306284
8.0 Gas Lens
nozzle
W000306285
9.6
W000306286
12.8
11
W000143188
P 10 head
PROTIG III S 10
Rep Ref. P 20 Ref. P 30 Ø
Wear parts
1
W000306223
Short back cap
W000306224
Long back cap
2
W000306230
Back cap O’Ring
3
W000306211
Sealing ring
4
W000306241 W000306246
1.0
Collet
W000306242 W000306247
1.6
W000306243 W000306248
2.0
W000306244 W000306249
2.4
/ W000306261
2.5
W000306245 W000306250
3.2
/ W000306251
4.0
5 W000306206 W000306207
Standard
collet body
6
W000306273 W000306277
6.4
Nozzle
W000306274 W000306278
8.0
W000306275 W000306279
9.6
W000306276 W000306280
12.8
/ W000306281
15.7
6L
/ W000306462
6.4
Long
Nozzle
/ W000306463
8.0
/ W000306464
9.6
/ W000306465
11.2
7 W000306216
Gas lens
Sealing ring
8 W000306214
Gas Lens
collet body
9 W000306219
Gas Lens filter
10
W000306287
8.0
Gas Lens
nozzle
W000306288
9.6
W000306289
12.8
W000306290
15.0
10L
W000306467
8.0
Gas Lens
Long Nozzle
W000306468
9.6
W000306469
11.2
W000306470
12.6
11
W000143189 /
P 20 head
/ W000143190
P 30 head
PROTIG III S 20 - 30
Rep Reference Ø Wear parts
1
W000306225
Short back cap
W000306226
Long back cap
2
W000306231
Back cap O’Ring
3 W000306212
Sealing ring
4
W000306252
1.0
Collet
W000306253
1.6
W000306254
2.0
W000306255
2.4
W000306256
3.2
W000306257
4.0
W000306258
4.8
5 W000306208 Standard collet body
5B W000306201 Strengthened
collet body
6
W000306277
6.4
Nozzle
W000306278
8.0
W000306279
9.6
W000306280
12.8
W000306281
15.7
6L
W000306462
6.4
Long
Nozzle
W000306463
8.0
W000306464
9.6
W000306465
11.2
7 W000306217
Gas lens
Sealing ring
8
W000306215
Gas Lens
collet body
9 W000306219
Gas Lens filter
10
W000306287
8.0
Gas Lens
nozzle
W000306288
9.6
W000306289
12.8
W000306290
15.0
10L
W000306467
8.0
Gas Lens
Long Nozzle
W000306468
9.6
W000306469
11.2
W000306470
12.6
11 W000143191
P NG 40 head
PROTIG III S 40
Rep Reference PROTIG III S Spare parts
107
W000383594
10-20 5m
Gas Power cable
W000383595
8m
W000383596
30-40 5m
W000383597
8m
111
W000141831
10-20-30-40 Quick Connection Gas
114 W000279238
10-20-30-40 Gas C connection
115
W000270832
S Trigger male connection
116 W000270833
C5B Plug 5 pins
119
W000279396
10-20-30-40 Gas inlet pipe
Rep Reference PROTIG III S Spare parts
101
W000279230
10-20 RL handle
W000279231 30-40
102 W000383558 10-20 Switch box + Sleeve
30-40
104 W000383559 10-20-30-40 Microswitch
105 W000384118 10-20-30-40 Neoprene sheath
106 W000352104 10-20-30-40 Trigger cable 2 wires