Lindy 70578 User manual

Low Profile
PCI Card 2S 16C650
1P EPP/ECP
LINDY Art. Nr. 70578
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - APR2001
English Manual
Low Profile PCI Card 2S 16C650 1P EPP/ECP
Description
The 70578 32Bit PCI bus Plug & Play 2S/1P I/O card is equipped with two High-Speed RS-232.V24 Standard
Serial Interfaces and one ECP/EPP/SPP/BPP IEEE 1284 Centronics Parallel Interface. The serial ports include 32
Byte FIFO with a speed up to 921Kb/Sec. 70578 has two 9 pin male connectors for attaching peripherals´ units with
Serial RS-232 Standard Interface and one 25 pin female connector for peripherals' units with IEEE 1284 Centronics
Parallel Interface.
Hardware Specification
Serial Port:
UART Chipset: SUN1889, Hardware FIFO: 32Byte FIFO
Compatible chips: with 16C650, 16C550 and 16C450.
IEEE standard: RS-232 Interface
Driver Chipset: TI-75232, speed up to 100Kb/Sec, length 300-500m
Max. Speed: up to 921Kb/Sec (HYPER Terminal program)
Parallel Port:
Parallel Chipset: SUN1689, Hardware FIFO: 32Byte FIFO
Compatible chips: with ACC3203, ST-78C36 and HT6535.
IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface
Max. Speed: up to 2.7MB/Sec
Hardware Installation
½ Turn off the power of your computer
½ Plug the 70578 Serial Adapter to the PCI bus of your computer
½ Connect the peripheral (Printer, Modem, Scanner… etc. to this adapter
½ Turn on the power of your computer
PCI device listing display (for example…)
Bus No Device No Func. No Vendor ID Device ID Device Class IRQ
0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7168
Simple COMM.
Controller 10

LINDY Art. Nr. 70578
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - APR2001
English Manual
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error occurs, please change the PCI slot.
After correct hardware installation you can start installing the software from the driver CD.
Pin Assignments
Parallel 25Pin female connector pin assignments:
Parallel 25 Pin female connector:
Pin Signal Pin Signal Pin Signal
1 STROBE 10 ACKNOWLEDGE 19 GROUND
2 DATA 0 11 BUSY 20 GROUND
3 DATA 1 12 PAPER EMPTY 21 GROUND
4 DATA 2 13 SELECT 22 GROUND
5 DATA 3 14 AUTO FEED 23 GROUND
6 DATA 4 15 ERROR 24 GROUND
7 DATA 5 16 INIT 25 GROUND
8 DATA 6 17 SELECT INPUT 26 GROUND
9 DATA 7 18 GROUND
Serial 9 Pin male connector pin assignments:
Serial 9 Pin male connector (S1 and S2):
Pin Signal Pin Signal Pin Signal Pin Signal
1 CD 4 DTR 6 DSR 8 CTS
2 RD 5 GROUND 7 RTS 9 RI
3 TD
Technical Specification
Compatibility: PCI 32Bit card for 486/586/Pentium/Pentium-II/III/C5/K6
Operating system: WIN 9.x/ME/NT/2000, LINUX, DOS
Chips: 1 x SUN1889, 1 x SUN1689
Connections: 2 x DB 9 m connector serial, 1 x DB 25 f connector parallel
PCB: 2 Layer / 120 x 64 mm