Lindy 32330 User manual

© LINDY Group - FIRST EDITION (July 2023)
5 Port HDMI 4K60 Seamless Multiview
KVM Switch
User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano
Manual de Usuario Español
No. 32330
lindy.com

User Manual English
Safety Instructions
WARNING 
Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock, which
may result in death.
This device is a switching type power supply and can work with supply voltages in the range 100 - 240
VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type
and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it
is firmly secured in place and does not detach by pulling before installing into a power socket.
To reduce risk of fire, electric shocks or damage:
Do not open the product nor its power supply. There are no user serviceable parts inside.
Only qualified servicing personnel may carry out any repairs or maintenance.
Never use damaged cables.
Do not expose the product to water or places of moisture.
Do not use this product outdoors it is intended for indoor use only.
Do not place the product near direct heat sources. Always place it in a well-ventilated place.
Do not place heavy items on the product or the cables.
Please ensure any adapters are firmly secured and locked in place before inserting into a wall
socket.
Instructions for Use of Power Supply
To connect the adapter
Slide the desired plug adapter into the power supply until it locks
into place.
To remove the adapter
Press the push button latch.
While pressed, remove the adapter.

User Manual English
Introduction
Thank you for purchasing the 5 Port HDMI 4K60 Seamless Multiview KVM Switch. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
This advanced KVM switch allows the control of four HDMI and one Type C sources such as computers,
laptops, game consoles and so on from a single HDMI 4K display simultaneously with the screen split in
many different Multiview modes; the user can interact with each HDMI device from a console with mouse
and keyboard connecting the respective USB ports to the sources, also in any Multiview mode by simply
moving the mouse pointer from one quadrant to another. Thanks to seamless feature, switching from one
source to another happens instantly without any lag or black screen, making it perfect for any critical
application such as control rooms, broadcasting, E-Sports and security.
User can easily manage the switch via front panel buttons, IR remote control, hot-keys, RS-232 or TCP/IP
commands and control software while a second HDMI mirrored output can be used for additional local
monitoring or for video capture adding a HDMI to USB video capture device.
Package Contents
5 Port HDMI 4K60 Seamless Multiview KVM Switch
IR remote control
4-Pin Terminal Block
2 x Mounting Ears with screws
12VDC 2.5A Multi-country Power Supply (UK, EU, US & AUS), DC Jack: 5.5/2.1mm
Lindy Manual
Features
Supports resolutions up to 3840x2160@60Hz 4:4:4 8bit
KVM function to allow the connection of keyboard and mouse to control the inputs
Seamless inputs switching
2 mirrored HDMI outputs
5 different Multiview modes
Support USB mouse roaming
EDID management
Audio Pass-through of all HDMI audio formats including LPCM, AC3, DD+, DTS, DTS-HD up to 7.1
3.5mm and TosLink (optical) Audio outputs, support volume control and independent Audio selection
Manageable via front panel buttons with OSD, IR remote control, control software (for Windows),
keyboard hot-keys (for KVM selection), RS-232 or TCP/IP commands
Specification
HDMI 2.0b, 18Gbps compliant
HDCP 2.2/1.4 pass-through
ESD Protection: ± 8kV (air-gap discharge)
Human Body Model: ± 4kV (contact discharge)
Operating Temperature: 0°C - 40°C (32°F - 104°F)
Storage Temperature: -20°C - 60°C (-4°F - 140°F)
Relative Humidity: 10 - 70% RH (Non-condensing)
Metal Housing
Colour: Black
Power Requirements: AC100-240V 50/60Hz
Power Consumption: 15W

User Manual English
Installation
Front
1. IR: IR signal receiver.
2. AUTO / 1080P:
- Press this button to enable or disable the Auto Switching function on single display mode.
- Long press this button for 3 seconds to change the output resolution to 1080p60.
3. HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / USB-C:
- Press these buttons to select HDMI 1, HDMI 2, HDMI 3, HDMI 4 or USB-C (AV only) input.
- Long press HDMI 1 button for 3 seconds to select SINGLE mode.
- Long press HDMI 2 button for 3 seconds to select PIP mode.
- Long press HDMI 3 button for 3 seconds to select PBP mode.
- Long press HDMI 4 button for 3 seconds to select 3xWIN mode.
- Long press USB-C button for 3 seconds to select 4xWIN mode.
4. WINDOW / AUDIO:
- Press this button to show a border on window 1, press again to show it on window 2, 3 or 4; then
press one input button to select the source signal to be displayed in the current selected window.
- Long press this button for 3 seconds, an Audio selection list will appear on the screen; use
buttons to browse and MENU button to confirm the selection.
The LED will stay always on when working on each Multiview mode, not on SINGLE mode.
5. KVM: Press this button to select one window as KVM source; for example press 2 times to show a
border on window 2, in this way the Mouse and Keyboard connected to the USB ports on the rear
panel will control the source showed on window 2.
Please Note: HDMI 4 and USB-C ports cannot be selected as a KVM source at the same time.
6. MENU / EXIT / : OSD menu navigation buttons.

User Manual English
Rear
1. HDMI A / HDMI B OUTPUT: Connect to two HDMI displays, HDMI A is the main output.
2. HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / USB-C INPUT: Connect to HDMI and Type C source devices.
3. 12V DC: Connect the 12VDC 3A PSU to an AC wall outlet and securely connector to the unit.
4. SERVICE: USB Type A port. Connect to a PC for firmware update.
5. LAN: TCP/IP control port.
6. CONTROL: RS-232 port (5V output, Tx, Ground and Rx). Connect to a PC, Serial Controller or Serial
device via phoenix block 4-way connection for the pass-through transmission of RS-232 commands.
7. AUDIO OUT:
- L/R: 3.5mm analog stereo output port.
- TOSLINK: digital audio optical output port.
8. USB-KVM:
- Mouse / Keyboard: USB Type A ports, connect to a USB mouse and keyboard.
- HOST1 / HOST2 / HOST3 / HOST4: USB Type B ports related to each respective input for KVM
control. Please Note: HOST4 port can be used for KVM control of HDMI 4 or USB-C input (not
possible to use both at the same time).
9. Connect the housing to the ground.
Operation
The Switch supports resolutions up to 4K60 and audio formats such as LPCM, AC3, DD+, DTS, DTSHD,
up to 7.1 channel (pass-through function via HDMI cable, USB-C input supports only LPCM 2.0 audio).
LPCM format audio volume can be controlled as shown below in many ways, the following video output
resolutions are supported:
No.
Output Resolution
No.
Output Resolution
1
4096x2160p 60Hz
9
1920x1080p 50Hz
2
4096x2160p 50Hz
10
1360x768p 60Hz
3
3840x2160p 60Hz
11
1280x800p 60Hz
4
3840x2160p 50Hz
12
1280x720p 60Hz
5
3840x2160p 30Hz
13
1280x720p 50Hz
6
3840x2160p 25Hz
14
1024x768 60Hz
7
1920x1200p 60Hz RB
15
AUTO
8
1920x1080p 60Hz
16
USER

User Manual English
EDID & HDCP settings
The following EDID modes can be selected:
No. EDID Mode No. EDID Mode
1 4K60 – 2.0CH 10 1600x1200
2 4K60 – 5.1CH 11 1440x900
3 4K30 – 2.0CH 12 1360x768
4 4K30 – 5.1CH 13 1280x1024
5 1080p – 2.0CH 14 1024x768
6 1080p – 5.1CH 15 AUTO
7 720p 16 4K60 – 7.1CH
8 1920x1200 17 4K30 – 7.1CH
9 1680x1050 18 1080p – 7.1CH
19 USER
The HDMI output supports 2 HDCP options: FORCE-1.4 and FORCE-2.2.
Multiview
The switch support 5 Multiview display modes:
The following different operations can be done for each Multiview mode:
SINGLE: Inputs selection.
PIP: Inputs selection, Sub window size and position selection.
PBP, 3xWIN, 4xWIN: Inputs selection, Window Ratio selection, Display aspect selection.
Keyboard-Hotkeys KVM Selection
KVM selection can be done with the following Hotkeys:
Ctrl + Ctrl + 1, 2, 3 or 4: Input signal corresponding to WIN1, 2, 3 or 4 will be selected as KVM source.
Ctrl + Ctrl + R + N: Disable USB Roaming function.
Ctrl + Ctrl + R + Y: Enable USB Roaming function.
Ctrl + Ctrl + M + 1, 2, 3, 4 or 5: Switch multiview mode to SINGLE, PIP, PBP, 3xWIN, or 4xWIN mode.
Ctrl + Ctrl + W + “m” + SET + “n”: Display source “n” on window “m” (“m” stands for window number, “n”
stands for input number).
Ctrl + Ctrl + A + “n”: Switch Audio source (“n” stands for 1, ..5 to select an input or A to select WIN 1).
Ctrl + Ctrl + A + N: Mute Audio.
Ctrl + Ctrl + A + Y: Unmute Audio.

User Manual English
OSD Menu
OSD Menu can be activated pushing MENU button on the front panel, then all options can be browsed
pushing UP, DOWN, LEFT and RIGHT buttons. MENU button can be used also to confirm the choice,
EXIT button to go one step back or to exit from OSD Menu.
Output
Function Default Choices
Resolution 3840x2160p60 See Resolution table
VKA Black screen Black screen,
Blue screen
4K-Auto ON ON, OFF
ITC* OFF ON, OFF
Multiview
Single Input select HDMI1, HDMI2,..
PIP
Win1 select HDMI1, HDMI2,..
Win2 select HDMI1, HDMI2,..
PIP position Right bottom,..
PIP size Small,..
PBP
Win1 select HDMI1, HDMI2,..
Win2 select HDMI1, HDMI2,..
Mode 1, 2, 3
Aspect Full, 16:9
3xWIN
Win1 select HDMI1, HDMI2,..
Win2 select HDMI1, HDMI2,..
Win3 select HDMI1, HDMI2,..
Mode 1, 2
Aspect Full, 16:9
4xWIN
Win1 select HDMI1, HDMI2,..
Win2 select HDMI1, HDMI2,..
Win3 select HDMI1, HDMI2,..
Win4 select HDMI1, HDMI2,..
Mode 1, 2
Aspect Full, 16:9

User Manual English
Audio
Audio select Win1 Win1, HDMI1,..
Volume 100 0..100
Audio-mute OFF ON, OFF
System
Language English English, 中文
EDID 4K60 - 2.0 4K60 - 2.0,..
USB roaming** OFF ON, OFF
Baud rate 9600 9600, 19200, 38400,
57600, 115200
Reset
FW version Read only
IP Address Read only
*: as ITC setting, OFF is suggested for video display and ON for PC (specially for desktop display).
**: USB roaming function can be enabled only on PBP, 3xWIN or 4xWIN Multiview modes. Please note
that KVM function can be assigned to HDMI4 or USB-C port, not both together.
IR Remote control
1. Return / Exit
2. Video input selection
3. OSD menu navigation buttons: Menu (Enter), Up, Down, Left
Right
4. Multiview mode selection
5. Audio input selection
6. USB-KVM selection
TCP/IP Control

User Manual English
TCP/IP control
Default parameters
IP address: 192.168.0.247
Sub Mask: 255.255.255.0
Gateway: 192.168.0.1
Net Port: 2000
All the parameters can be changed by Software GUI and RS-232 command.
Software GUI (Windows only)
Download ViewerMate application from our website and install it on a Windows PC.
Default User: admin
Default Password: 111111
Click on Edit to change the default password and Login to enter.
Connect
RS232 and Network settings of the unit and IP address and SubMask info of the Computer connected.

User Manual English
Output
Select resolution and other output options as shown in the tables and features above.
Multiview
Select the Multiview mode to display and assign the inputs to the desired windows. Is possible to save
different layouts and recall them, click on Read button to activate the functions selected.
Audio
Select the audio input, change the volume (from 0 to 100) and set On/Off the mute function.