Linear Technology DC1505A Quick setup guide

1
dc1505af
DEMO MANUAL DC1505A
DESCRIPTION
LTC4360 Overvoltage
Protection Controller
Demonstration circuit DC1505A features the LTC
®
4360 an
overvoltage protection controller that safeguards 2.5V to
5.5V systems from input supply overvoltage. The LTC4360
is designed for portable devices with multiple power sup-
ply options including wall adapters, car battery adapters
and USB ports.
The LTC4360 controls an external N-channel MOSFET in
series with the input power supply. During overvoltage
transients, the LTC4360 turns off the MOSFET within 1µs,
isolating downstream components from the input supply.
Inductive cable transients are absorbed by the MOSFET
and load capacitance. In most applications, the LTC4360
provides protection from transients up to 80V without
requiring transient voltage suppressors or other external
components.
The LTC4360 has a delayed start-up and adjustable
dV/dt ramp-up for inrush current limiting. A PWRGD pin L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear
Technology Corporation. All other trademarks are the property of their respective owners.
Figure 1. Demonstration Circuit 1505A
provides power good monitoring for VIN. The LTC4360-1
features a soft shutdown controlled by the ON pin. The
LTC4360-2 has a GATEP pin that drives an optional ex-
ternal P-channel MOSFET for negative voltage protection.
Followinganovervoltagecondition,theLTC4360 automati-
cally restarts with a start-up delay.
DC1505A demonstrates threeprotection schemes selected
with a jumper: (A) overvoltage protection, (B) overvoltage
andnegativevoltageprotection,and(C)overvoltage,nega-
tive voltage, and reverse current protection. Each option
has an output LED and can be applied to a USB protected
output. Protection (A) features the LTC4360-1 with ON
control. Protection (B) and (C) feature the LTC4360-2 and
a P-channel MOSFET driven by GATEP.
Design files for this circuit board are available at
http://www.linear.com/demo
1505a FO1

2
dc1505af
DEMO MANUAL DC1505A
QUICK START PROCEDURE
Demonstration circuit description 1505A is easy to set
up to evaluate the performance of the LTC4360. Refer to
Figure 2 and Figure 3 for proper measurement equipment
setup and follow the procedure below.
1. Connect a power supply across VIN and GND.
2. Select protection type at JP1 and connect a voltmeter
across the corresponding output and GND:
a. For overvoltage protection select (A) OV and
connect to OUT(A). Figure 2a.
b. For overvoltage and negative voltage protection
select (B) OV/NV and connect to OUT(B).
Figure 2b.
c. For overvoltage, negative voltage, and reverse
current protection select (C) OV/NV/RC, connect
to OUT(C). Figure 2c.
3. Select ENABLE at JP2 for protection (A) to enable.
4. For USB protection, connect a USB cable from J2 to
the USB device (Figure 3). Select the protection type
at JP1 and match JP3 to JP1. Connect a second USB
cable from a computer to J1.
Table 1. Typical DC1505A Performance Summary (TA= 25°C)
PARAMETER CONDITION VALUE
Input Voltage Protection (A) OV
Protection (B) OV/NV
Protection (C) OV/NV/RC
0V to 30V
–30V to 30V
–30V to 30V
Output Voltage Input Range for Gate Turn-On 2.1V to 5.8V
Device Used and Difference Protection (A) OV
Protection (B) OV/NV
Protection (C) OV/NV/RC
LTC4360-1, ON Control
LTC4360-2, GATEP
LTC4360-2, GATEP
PERFORMANCE SUMMARY

3
dc1505af
DEMO MANUAL DC1505A
QUICK START PROCEDURE
Figure 2a. DC1505A Protection (A) Setup for Overvoltage
SELECT
PROTECTION
(A)
OVERVOLTAGE
PROTECTED
OUT
1505a FO2a
SELECT
ENABLE
PWRGD
VIN
V
+
–

4
dc1505af
DEMO MANUAL DC1505A
Figure 2c. DC1505A Protection (C) Setup for Overvoltage, Negative Voltage, and Reverse Current
SELECT
PROTECTION
(C)
OVERVOLTAGE,
NEGATIVE VOLTAGE,
REVERSE CURRENT
PROTECTED OUT
1505a FO2c
PWRGD
VIN
V
+
–
Figure 2b. DC1505A Protection (B) Setup for Overvoltage, and Negative Voltage
QUICK START PROCEDURE
SELECT
PROTECTION
(B)
OVERVOLTAGE,
NEGATIVE VOLTAGE
PROTECTED OUT
1505a FO2b
PWRGD
VIN
V
+
–

5
dc1505af
DEMO MANUAL DC1505A
QUICK START PROCEDURE
Figure 3. DC1505A USB Protection Setup
SELECT USB PROTECTION
(JP3 MUST MATCH JP1)
USB CABLE
1505a FO3
PROTECTION (A)
SELECT ENABLE
USB DEVICE
SELECT
PROTECTION
USB CABLE
HOT
PLUG
PC

6
dc1505af
DEMO MANUAL DC1505A
QUICK START PROCEDURE
OPERATION
The DC1505A is used to evaluate the LTC4360 in three
protection configurations selected at JP1. The device in
need of protection is connected to one of the three OUT test
points or to the USB output connector J2. An input supply
is connected at VIN or a USB source is connected at J1.
ON Control
The ON pin for protection (A) with the LTC4360-1 is
controlled at JP2. Select ENABLE to enable the selected
protection, or DISABLE to enter a low current sleep mode.
Protection (A) OV
The first selection at JP1 is protection (A) OV which pro-
tects against overvoltage. The LTC4360 turns on a single
N-channel MOSFET when the input voltage is below the
overvoltage threshold. An amber input LED indicates if
the input supply is on while a green OUT(A) LED indicates
the gate is on and the input is passed over to the output.
Protection (B) OV/NV
The second selection at JP1 is protection (B) OV/NV which
protects against overvoltage and negative voltage. The
LTC4360 turns on an N-channel MOSFET when the input
voltage is below the overvoltage threshold. A P-channel
MOSFET is driven by the GATEP pin of the LTC4360-2 to
protect the output against an inadvertent negative voltage
connection at the input. The amber VIN LED indicates if the
input supply is on while a green OUT(B) LED indicates the
gate is on and the input is passed over to the output. A red
–VIN LED indicates if a negative input voltage is present.
Protection (C) OV/NV/RC
The third selection at JP1 is protection (C) OV/OC/NV/RC
which protects against overvoltage, overcurrent, nega-
tive voltage and reverse current. The LTC4360 turns on
back-to-back N-channel MOSFETs when the input voltage
is below the overvoltage threshold. The back-to-back
N-channel MOSFETs blocks reverse current feeding in to
the input. A P-channel MOSFET is driven by the GATEP
pin of the LTC4360-2 to protect the output against an
inadvertent negative voltage connection at the input. The
amber VIN LED indicates if the input supply is on while a
green OUT(C) LED indicates the gate is on and the input
is passed over to the output. The red –VIN LED indicates
if a negative input voltage is present.
USB Protection
DC1505A also provides connection for USB protection.
First connect a USB device with a USB cable at J2. Select
the protection type at JP1 and match this with JP3. Select
ENABLE at JP2. The USB source can then be connected
at J1.

7
dc1505af
DEMO MANUAL DC1505A
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, noresponsibility is assumed for its use. Linear Technology Corporation makes no representation
that the interconnection of its circuits as described herein will not infringe on existing patent rights.
SCHEMATIC DIAGRAM
5 5
4 4
3 3
2 2
1 1
D D C C B B A A
  

 

   
 

  

REVISION HISTORY
DESCRIPTION DATE
APPROVED
ECO REV
DILIAN R.

 
REVISION HISTORY
DESCRIPTION DATE
APPROVED
ECO REV
DILIAN R.

 
REVISION HISTORY
DESCRIPTION DATE
APPROVED
ECO REV
DILIAN R.

 
 
 
 

APPROVALS


TECHNOLOGY

 



        



www.linear.com










 
 
 

APPROVALS


TECHNOLOGY

 



        



www.linear.com










 
 
 

APPROVALS


TECHNOLOGY

 



        



www.linear.com











 
  
























     
















  


  
 
  





  

  
   






VCC

D-

D+

GND

     




       

  

  
   
IN

GATE

GATEP

OUT

PWRGD

GND

GND

GND






  

  

 


 

  






   

 






IN

GATE

ON

OUT

PWRGD

GND

GND

GND







VCC

D-

D+

GND

















   








IN

GATE

GATEP

OUT

PWRGD

GND

GND

GND





   

 




8
dc1505af
DEMO MANUAL DC1505A
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone] ●FAX: [phone] ●www.linear.com
 LINEAR TECHNOLOGY CORPORATION 2010
LT 1010 • PRINTED IN USA
DEMONSTRATION BOARD IMPORTANT NOTICE
Linear Technology Corporation (LTC) provides the enclosed product(s) under the following AS IS conditions:
This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT
OR EVALUATION PURPOSES ONLY and is not provided by LTC for commercial use. As such, the DEMO BOARD herein may not be complete
in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety
measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union direc-
tive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations.
If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date
of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR
ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LTC from all claims
arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all
appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or
agency certified (FCC, UL, CE, etc.).
No License is granted under any patent right or other intellectual property whatsoever. LTC assumes no liability for applications assistance,
customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind.
LTC currently services a variety of customers for products around the world, and therefore this transaction is not exclusive.
Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and
observe good laboratory practice standards. Common sense is encouraged.
This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LTC applica-
tion engineer.
Mailing Address:
Linear Technology
1630 McCarthy Blvd.
Milpitas, CA 95035
Copyright © 2004, Linear Technology Corporation