Linksys PC22604 - ProConnect II 2604 Switch User manual

ProConnect II 2604
Layer 2 Management 4-Port
Gigabit Ethernet Switch
igrate your network to Gigabit speed with the
ProConnect®II 2604 Gigabit Ethernet Switch. Perfect for
today’s high-speed network demands, this switch from
Linksys delivers non-blocking wire speed switching and
blazing Gigabit transfer speeds for all your network applications.
With the ProConnect II 2604 Switch as your network's backbone,
you'll connect your servers at Gigabit speeds. The four built-in
auto MDI/MDI-X ports deliver 8Gbps of non-blocking switching
performance. And as your needs grow, add Gigabit Ethernet or
Gigabit Fiber ports using the four available expansion slots. Three
Port Trunking groups eliminate bottlenecks, and you can stack up
to 8 switches and manage them as one.
The ProConnect II 2604 provides broadcast storm suppression,
has hardware MAC and IP address learning, and supports packet
filtering and port security. Partition your network into up to 256
VLANs, using port-based 802.1q tagging. Use the 802.1p packet
prioritization support to put time-sensitive data at the head of the
line. Configuration and monitoring your network performance is
a snap using the Web management interface, console, telnet, or
SNMP/RMON.
This expandable, managed switch is the perfect solution for your
Gigabit backbone.
• 4 RJ-45 ports for 10Base-T/100Base-TX/1000Base-TX con-
nections
• 4 Expansion slots for optional Gigabit Fiber or Gigabit Copper
modules
• Support for stacking up to 8 switches in one stack
• Port trunking support for up to 3 Port trunk groups
• Provides 8Gps non-blocking switching performance
• Supports Packet filtering and port security based on source or
destination MAC address
• Supports 802.1p/q Quality of Service, and VLAN tagging
• Traffic classification based on Port#, VLAN, and UDP/TCP logi-
cal port
• Optional expansion modules including EFPC2GE, and EFPC2SC
• Supports port mirroring for traffic analysis
• Manageable via Console, Telnet, Web, and SNMP
ProConnect II 2604 Layer 2 Management
4-Port Gigabit Ethernet Switch
Model No.: PC22604
Wire-Speed Gigabit Switching,
Manageability, and Stackability
Features
Features
Benefits
Benefits
• Four non-blocking, wire-speed Gigabit
(10/100/1000BaseTX) auto MDI/MDI-X ports
• Four Expansion slots for optional Gigabit
Ethernet (TX) or Gigabit Fiber (SX) Modules
• Supports 802.1p traffic prioritization, 802.1q
port-based VLAN tagging support, eight-high
stacking, and port trunking
• Manageable via console, telnet, web browser,
and SNMP/RMON
ProConnect®II Series
M

Package ContentsSpecifications
Model Number PC22604
Standards IEEE 802.3, 802.1d, 802.1p, 802.1q,
802.3ab, 802.3u, 802.3x, 802.1ad
Ports 4 10/100/1000 Mbps Ethernet Ports
4 Expansion Slots
Cabling Type Category 5 Ethernet Cables
LEDs Power, Heat, Fan, 1000M, 100M, 10M,
Link/ACT, FDX/COL
Environmental
Dimensions 16.93" x 1.75" x 13.78"
(430 mm x 44 mm x 350 mm)
Unit Weight 11.7 lbs. (5.3 kg)
Power 100~240V AC 60Hz, 240V/50Hz
Certification FCC Class A
Operating Temp. 32ºF to 122ºF (0ºC to 50ºC)
Storage Temp. -40ºF to 158ºF (-40ºC to 70ºC)
Operating Humidity 20% to 95%, Non-Condensing
Storage Humidity 5% to 90%, Non-Condensing
• One ProConnect®II 2604 Layer 2 Management
4-Port Gigabit Ethernet Switch
• One Setup CD with User Guide in PDF format
• One set of mounting brackets and screws
• One Power Cord
• One Registration Card
• 200Mhz or Faster Processor
• 64MB RAM
• CD-ROM Drive
• Ethernet Adapter
• Windows 95/98/Me/NT 4.0/2000/XP
Minimum Requirements
DS-PC22604-30218NC KL
Linksys
World Headquarters:
17401 Armstrong Ave.
Irvine, CA 92614 USA
E-mail: [email protected]
[email protected]
Web: http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional
Offices throughout the world. For a complete
list of local Linksys Sales and Technical
Support contacts, visit our Worldwide Web Site
at
www.linksys.com .