Lionel 70-2784-250 User manual

Congratulations on your purchase of the Lionel freight platform.
Before you begin to build the structure, look over these instructions
carefully. When assembling the walls, match the numbers as shown on
the diagram. Following the procedures given, snap the structure’s parts
together. No cementing is re uired. Before joining parts, trim off excess
plastic “flash” with a modeler’s knife. Lionel uses the highest uality of
styrene plastic to make its model kits. If permanent assembly is pre-
ferred, only cement and paint made for styrene should be used. To join
parts, use cement sparingly, using care not to get cement on exposed
areas. Apply cement to very small parts with a toothpick.
70-2784-250
Rev. 12/96
LIONEL
®
FREIGHT PLATFORM
22
4
When assembling the walls,
match the numbers as shown

© 1996 LIONEL LLC, CHESTERFIELD, MI 48051-2493
UNITED STATES OF AMERICA
DO NOT cement the
sliding door.
B
A
Note!