16 17
section).
4. Choose the Daily Dosage Ring that corresponds to your needs (please refer to the
“Understanding the Daily Dosage Rings” section).
5. Situate the Daily Dosage Ring in the center of the internal pill container and place your
medications in the container to correspond with when they are taken (1st, 2nd, 3rd,
etc.) indicated by the numbers on the ring (1, 2, 3, etc.). Do not place any medication
in the red sections. When you see the red approaching the dosage window, it is time
to refill the container.
6. Set up your medication schedule from LiveFine app (please refer to “Setting up
Medication Schedule” section) or set your medication alarm times on the dispenser
(please refer to the “Setting the Alarm” section).
7. Adjust the volume, date format, and time format if needed from LiveFine app (please
refer to “Setting Overview” section) or on the dispenser (please refer to “ Adjusting the
Volume”, “Selecting the Date Format”, and “ Selecting the Time Format” sections).
8. Close the cover and lock it with the provided key (please refer to the “Locking and
Unlocking the Cover” section).
9. At the designated medication times, the alarm will sound, and lights will go off.
NOTE: If the dispenser’s volume was set to mute, then the alarm will not sound.
10. Slide open the window by pushing the tab to the right.
11. Tilt the pill dispenser to pour the pills out into your hand or medication cup. Check
to make sure all pills have come out of the compartment. The alarm should stop
automatically.
NOTE: Out of pills icon will appear when there are no pills left in the dispenser.
12. Close the dispensing window and place the pill dispenser on a flat surface.
13. Monitor activity or adjust settings for the pill dispenser from the compatible LiveFine
app.
Operating the LiveFine App
Setting up Medication Schedule
When you first operate the pill dispenser through the
app, you will need to set up your medication schedule.
1. On the dashboard, tap “Setup”.
2. Tap “Doses per day” to select the number of doses
per day.
3. Tap “Save” to save your dose selection
NOTE: You can turn on “Unlock Cycle Length” to
customize your day cycle if the preset day cycle
does not fit your needs.
4. Select the alarm time slot to set an alarm.
5. Set the time for the selected alarm time slot. Add a
note to the alarm if desired.
NOTE: The same alarm time cannot be set
repeatedly.
6. Once all the alarms are set, a popup window will
appear. Tap “Okay” in the popup window. The dispenser will automatically rotate the
tray back to the starting position.
7. Another popup window will appear indicating your tray is ready. Tap “Okay” in the
popup window.
Dashboard Overview
Next Dose – shows the time of the next dose, next dose number, total doses, the note
