Living Earth Crafts Napa Spa Treatment Table User manual

Napa Spa Treatment Table
USER MANUAL
1-400-0033 • Rev A • 5/29/18
© Living Earth Crafts 2018, All Rights Reserved
*all tables shown with oponal accessories and/or nishes

© Copyright 2018
Living Earth Cras®
All rights reserved. is document or any
portion thereof may not be reproduced
in any way, including photocopying or
translation to another language without
the prior written permission from Living
Earth Cras.
Living Earth Cras® is a registered trade-
mark of Earthlite, LLC.
Legal Notice
e information provided in this document is intended
for informational purposes only and is subject to change
without notice. e information provided in this docu-
ment should not be construed as a commitment by
Living Earth Cras®.
Living Earth Cras® assumes no responsibility for the
accuracy or suitability of the information contained in
this document. is document may contain technical
inaccuracies or errors. Living Earth Cras® makes no
expressed or implied warranties of any kind concerning
the information contained in this document, including,
but not limited to, the implied warranties of merchant-
ability and tness for purpose.
Living Earth Cras® shall not be liable for incidental or
consequential damages in connection with or arising out
of the product, performance, or use of this document
and the information and material it describes.

Introduction
Congratulaons on your purchase of the Napa spa treatment table. The Napa enables resorts to
oer a full range of spa services where power is not readily available. This versale table features
hardwood construcon and Quietech™ manual hydraulic li system.
Napa tables are designed for licensed therapists and are intended to be used in a professional
spa, massage studio, or similar commercial environment. While no special training is needed to
operate the table, for safety reasons it is important that the instrucons contained in this manual
are reviewed in detail before the rst use. This manual should be read in its enrety by each
professional who will be operang the table to ensure the safety of both operator and client. This
manual should be saved for future reference.
The Napa table should not be used in any other manner than described in this manual. Please
read, understand, and follow all safety warnings, labels, and instrucons. Misuse, use of
unnecessary force, or using the product for unintended or unauthorized procedures can result in
injury to operator, client, and/or equipment.
Detailed instrucons for use and maintenance can be found in this user manual. If you have
further quesons, please contact us at [phone] for US customers, or [phone] for
internaonal customers. We can also be reached via e-mail at info@livingearthcras.com
Secon 1: Safety Informaon
Safety Symbols
Warnings
Secon 2: Product Overview
Product Photos
Product Specicaons
Secon 3: Installaon
Moving Your Table
Leveling Instrucons
Weight/Li Capacity
Secon 4: Operang Instrucons
Pneumac Height Adjustment
Pneumac Tilt/Salon Adjustment
Secon 5: Care & Maintenance
Cleaning & Ongoing Maintenance
Troubleshoong
Warranty Informaon
Contact Us
2
2-3
4
5
6
6
6
7
7
8
9
9
Table of Contents
back cover

READ AND SAVE THESE INSTRUCTIONS
2
IMPORTANT SAFETY INSTRUCTIONS - FOR COMMERCIAL USE ONLY
Read all instructions before using this product.
Safety Symbols
Familiarize yourself with the following
Safety & Warning symbols. They are
designed to prevent damage and injury to
you, your clients, and your new Earthlite
product.
IMPORTANT: The important safety
instructions and warnings in this manual
cannot cover all possible problems and
conditions that can occur. Use common
sense and caution when installing,
operating, or maintaining this appliance.
Indicates an imminently hazardous
situation which could result in serious
or fatal injury.
Indicates a potentially hazardous
situation which could result in serious
injury.
Indicates a potentially hazardous
situation which could result in
equipment damage and/or injury.
SECTION 1: SAFETY INFORMATION
2) When lowering the table height, be sure there are no foreign obstacles are underneath your table
that could obstruct it from lowering completely. This could damage your table.
3) Never set anything under the table frame to avoid collision if lowered.
4) Never operate your table on an uneven surface. Adjust the leveling feet so that your table is stable.
5) Never raise the head or leg section with a client in the prone position (face down.)
6) Never use or store your table in a wet or very humid environment. Water and excessive moisture
can damage the wood cabinet. Evidence of exposure to water or moisture will void your warranty.
7) If you have purchased the Flexible Armrest Option, never use the Armrests as handholds or body
support mechanisms, especially when setting clients on or off the table.
8) Never drop or insert any object into any opening.
1) Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
2) Do not operate this equipment unless properly trained.
3) Install this furnishing in treatment area not accessible to the public.
4) Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled
persons.
5) This product does not have “pinch point” protection. Only operate when no possibility of any portion
of the body could be caught and injured while moving the table top upward/downward, or activating
the back/foot tilt.
6) Do not use this furnishing to support video equipment such as televisions or computer monitors.
7) Never attempt to use the Head or Leg lift section to support concentrated weight such as sitting
or standing
To reduce the risk of injury to persons:
1) When lowering any section of the table, make sure that no supplies or any part of
yours or your client’s body is between the top of your table and its base. This could
result in injury, or could damage your table as well as the item. It is recommended
that you always return your table top to the lowest at position to avoid leaving the
base exposed.

READ AND SAVE THESE INSTRUCTIONS 3
SECTION 1: SAFETY INFORMATION
DO NOT store or place anything under the backrest - this can damage
the top and/or lng mechanism. This area is not designed for storage
or as an area to hold accessories and/or masage supplies while
performing any type of service. Placing anything in this area can cause
damage to the table and/or object and will void your warranty.
Always use extreme cauon when making any posion adjustments to
your table. Ensure all body parts and objects are clear from all moving parts.
The described adjustments can be done with a client on the table, but use
cauon to ensure that the client’s weight is supported while posioning the
table secon(s).
Do not sit or put unnecessary amounts of pressure
on the back secon of the table when it is in lt
posion of any level. This can damage or destroy the
lt mechanism and cause harm or bodily injury to
persons. The lt mechanism is intended solely to be
used when a client is properly seated or laying on the
table top. Damage caused in this manner may void
the warranty.
Do not sit or put unnecessary amounts of pressure
on the leg secon of the table when it is in lt
posion of any level. This can damage or destroy the
lt mechanism and cause harm or bodily injury to
persons. The lt mechanism is intended solely to be
used when a client is properly seated or laying on the
table top. Damage caused in this manner may void
the warranty.

SECTION 2: PRODUCT OVERVIEW
*table shown with oponal accessories and/or nishes. Measurements may vary due to natural material variaons.
4
Shelf Base Trestle Base Cabinet Base
Base Options
Tilting Back Section (Optional)
Tilting Leg/ Foot
Section (Optional)
Leveling Foot
Accessory Outlet
Salon Headrest
(optional)
Height Adjustment
Handle
Neck Roll (Optional)
Flex Arms (Optional)

5
Feature Standard Oponal
Hardwood Frame
(Shelf Base) X
Naturso™ Upholstery X
3.5” Deluxe Spa
Cushioning X
Massage Flat Top X
Standard Height Range X
Trestle or Cabinet Base X
Manual Tilt, Pneumac
Tilt, Pneumac Salon Top X
Flex Arms
(not available on manual lt
or at)
X
Strata Cushioning X
Caress or Flex-Rest
plaorm X
Low Height Range X
Included Features
Product Specications
Top Length 73” (185 cm)
Top Width 28”, 30”, 32” (71 cm, 76 cm, 81 cm)
Top Opons Flat, Manual Tilt, Pneumac Tilt,
Pneumac Salon
Base Opons Shelf, Trestle, Cabinet
Height Range Standard: 25” - 37” (64 cm - 94 cm)
Low: 22” - 31” (57 cm - 79 cm)
Li Capacity 500 lbs (227 kg)
SECTION 2: PRODUCT OVERVIEW

Your Napa table comes completely assembled and ready to use.
Once the table is unpacked, follow the “Moving Your Table” instruc ons below.
Moving Your Table
Li your table by grasping  rmly from the bo om of the frame underneath the
upholstered top. Do not try to li from the upholstered top.
Always use cau on when moving your table - always use proper safety
procedures/equipment.
Leveling Your Table
Leveling, or balancing, your table is very important during ini al setup and rou ne maintenance.
Your table is equipped with leveling feet that can adjust to uneven fl oors.
To adjust the leveler feet:
1. Place the table in the posi on you plan to use it.
2. To determine which foot needs adjus ng, a empt to “rock” your table. If there is any
movement, the leg that is li ing is the one that will need adjus ng.
3. Raise table height approximately 6 inches.
4. Using your hand, or a wrench if necessary, turn the leveling foot in the needed direc on.
(Counterclockwise will lower the overall height, clockwise will raise the overall height)
Table Accessories
All Napa tables come with outlets at both ends, speci cally designed for providing a  xed
loca on for FacePillow pla orms, salon pillows, and other accessories.
See the Living Earth Cra s website for all available acces-
sories that will  t into the table outlets.
SECTION 3: INSTALLATION
6
Weight & Lift Capacities
The Napa is powered by a heavy-duty electric li actuator. The
recommended li capacity is 500 lbs.
500 lbs.
The back sec on and leg sec on has a maximum weight capacity
of 50 lbs. These sec ons are not meant to hold full body weight.
50 lbs.

SECTION 4: OPERATING INSTRUCTIONS
7
Pneumatic Height Adjustment
Raise table height: Turn handle clockwise
Lower table height: Turn handle counter-clockwise
Note: Use cau on when making any height adjustments with client on the table
To store handle, see instruc ons below:
Pull handle outwards Fold in to store handle
Lever location for
head tilt section
(underneath table top)
Pneumatic Tilt/Salon Adjustment (Optional)
One-Touch Lever
Lever location for
leg/foot tilt section
(underneath table top)
To adjust, compress the lever to release, allowing you to reposi on the angle of the table
sec on. Using your other hand, support the table sec on un l the desired angle is reached,
and release the lever to lock into place.
Note: Adjustments can be done with a client on the table, however, use cau on to ensure
that the client’s weight is supported with your hand that is guiding the table sec on.

SECTION 5: CARE & MAINTENANCE
With proper maintenance, your table is designed to give you years of trouble-free operaon.
To ensure your table will connue to funcon properly and keep its appearance, we
recommend the following.
Category Care Recommendation
Upholstery
Aer each treatmeant on your table, clean thoroughly, removing all residue.
This and other residues may cause upholstery to dry out and become brile.
We recommend a mild detergent and warm water mix, or environmentally
friendly disinfectant cleaners, such as Viraguard®. Apply with cloth or spray
directly onto the upholstery. Ensure surface is wiped clean of residue.
Use cauon when aempng to remove stains as you could damage your
upholstery. Any stains should be treated immediately with a soluon of 1
part alcohol to 10 parts water. Restore the luster to the spot with a light
applicaon of spray furniture wax.
Wood To maintain the wood nish and retouch scratches, use a high quality
furniture wax.
Leveling Feet Regularly check to ensure the table is level and stable.
See page 6 for leveling instrucons.
Cleaning & Ongoing Maintenance
DO NOT USE acetone, “Armor All” type cleaners, citrus-based cleaners,
or industrial cleaners. These can seriously damage the upholstery. Such
damage would not be covered under warranty.
8

SECTION 5: CARE & MAINTENANCE
This helpful troubleshoong guide will provide you with informaon about how to recognize a
problem with your table, determine possible causes, and nd a soluon.
In the event your specic situaon is not covered in this guide, please contact Living Earth Cras
so our technical support department can assist you. Beyond the troubleshoong guide below, do
not aempt to repair the table yourself. This can void your warranty.
Unauthorized service will not be covered. Please be sure to contact Living Earth Cras Customer
Service rst at [phone], [phone] Int’l.
Troubleshooting
Issue Solution
One-Touch Lever
is dicult to
move
Check the cable for any kinks or sharp bends from the lever to the gas
springs. The cable should have a so radius in order to allow the inner
cable to travel freely in the cable sheath. If the cable is kinked, contact
Living Earth Cras.
The table does
not raise or
lower evenly
The hydraulic system may need repair. Do not aempt to repair it.
Call Living Earth Cras customer service.
9
Warranty Information
Living Earth Cras (LEC) oers an industry best warranty against defects in materials, design,
and workmanship, to the original owner, as follows:
• Frame - limited lifeme warranty*
• Foam and upholstery covering - warranted for three (3) years
• Motors, controls, electronics - warranted for two (2) years, including parts and labor
• Accessories and opons - warranted for one (1) year, unless otherwise noted
LEC may repair or replace defecve components at our discreon. LEC will return the warranted
product, standard shipping pre-paid, to customers in the connental US. Internaonal customers
are responsible for any applicable dues and taxes, as well as all shipping charges inbound and
outbound. Normal wear and tear, and costs associated with maintenance procedures, and
damage caused by accident, misuse, improper maintenance, harsh operang environments or
neglect (which includes tears in the upholstery and damage caused by harsh chemical-based
cleaners) are not covered under this warranty. All warranes are limited to repair or replacement,
at LEC’s discreon, unless otherwise stated.
*Lifeme warranty applies to the original owner, as long as you own your table for 5 years aer
the model is disconnued, or 5 years for private label tables.

Contact Us
Living Earth Crafts
990 Joshua Way
Vista, CA. 92081
[phone]
[phone] Int’l
[phone] fax
[email protected]
Hours of operation:
Monday - Friday
8:00 a.m. to 5 p.m. PST
Saturday - Sunday
Closed
Visit us online at: livingearthcrafts.com
Read our blog at: livingearthcrafts.com/blog
Join us on Facebook®