Living Spaces 287926 User manual

Date:
Insert Line Drawing
ASSEMBLY INSTRUCTIONS
WALDEN COUNTER HEIGHT TABLE
287926
10/22/2021
Page 1 / 6

·
·
·
·
·
·
·
·
·
·
Hardware List
Assembly Instructions
Care & Maintenance & Warnings
Date:
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural intergrity of the
item.
Read all instructions carefully before unpacking assembly parts. Sharp, exposed staple tips can cause injury. For your protection,
please remove any exposed staples used in packing.
To avoid accidentally discarding small parts or hardware, please do not dispose of any contents until assembly is complete.
TABLE OF CONTENTS
Parts List
Page 3
Page 4
Page 5
Page 6
10/22/2021
Page 2 / 6
Keep instructions for future use.
Intended for residential use only.
Keep small parts and hardware out of the reach of children.
PRE-ASSEMBLY INSTRUCTIONS:
Remove all parts and hardware from the box and place them on a carpeted or scratch-free work surface.
Prior to starting assembly, use the parts and hardware lists to identify and separate each of the pieces included.
Do not over-tighten screws or bolts.
IMPORTANT SAFETY INSTRUCTIONS:
For your safety, assembly by two or more adults is recommended.

PART # INTERNAL # QTY
A
1314-32-TBT 1
B
1314-32-TL 4
Date:
Thank you for your purchase. Be sure to check all packing material carefully for small parts which may have come loose inside
the carton during shipment. Identify and count all parts and compare with the parts and hardware lists.
10/22/2021
Page 3 / 6
PARTS LIST
PICTURE
PART DESCRIPTION
LOCATION
Table Top
Directly in the carton
Legs
Directly in the carton

PART # QTY
18
28
38
41
Date:
Thank you for your purchase. Be sure to check all packing material carefully for small parts which may have come loose inside
the carton during shipment. Identify and count all parts and compare with the parts and hardware lists.
Phillips screw driver also needed for assembly (not included).
10/22/2021
Page 4 / 6
Φ5/16" x 19 x 1.8mm T Flat Washer
4 x 59mm Allen Key
HARDWARE LIST
PICTURE
PART DESCRIPTION
Φ5/16" x 76 Allenbolt
Φ5/16" x Φ13mm x 1.2mm T Spring Washer

Date:
Attach Legs
1. Attach Legs (B) to the Table Top (A) with quantity 2 Allen Bolt (1), Spring Washer (2),
and Flat Washer (3).Tighten with Allen Key (4).
2. Repeat for all 4 Legs (B).
STEPS
10/22/2021
Page 5 / 6

Wood Care Tips
·
·
·
·
·
·
·
·
·
·
·
·
·
Date:
10/22/2021
Page 6 / 6
Check that all screws and bolts are secure every three months or as needed
Dispose of packing material properly. Do not use plastic cover as head covering as it may cause suffocation.
Do not use this product as a stepladder.
Use this product for intended purpose only.
Intended for residential use only.
Avoid placing your furniture indirect sunlight.
Rearrange accessories over time to prevent spot bleaching.
For daily maintenance, use clean and soft rags or cloths to wipe off dust on the surface along the grains.
Never use damp rags or any thing with a hard surface to rub onto the furniture.
To avoid damage refrain from stacking large and/or heavy objects on top of the furniture.
Avoid cleaners which use chemical products. Many of these are harsh and not safe for use on upholstery.
WARNING
Do not use this product unless all screws and bolts are securely tightened.
CARE & MAINTENANCE
Wood color can fade and/or sun bleaching can occur when exposed to direct sunlight over a long period of time.