Living Spaces Y2103W-336 User manual

ASSEMBLY INSTRUCTIONS
LUCA TWIN PANEL BED
ITEM NO: Y2103W-336/337
Y2103B-336/337
Y2103G-336/337
SKU: 314659/314660
314571/314572
314615/314616
1
15 min
x 2 x 1 x 1

PART SKU# IMAGE DESCRIPTION QTY
AHeadboard 1
Slats 1
PART SKU# IMAGE DESCRIPTION QTY
B
Rails 2
2
C
D
Footboard 1
1994T-A-W:(White)
1994T-A-B:(Blue)
1994T-A-G:(Grey)
1994T-B-W: (White)
1994T-B-B: (Blue)
1994T-B-G: (Grey)
1994T-D
1994T-C-W: (White)
1994T-C-B: (Blue)
1994T-C-G: (Grey)
BOX 1- TW HEADBOARD/FOOTBOARD/SLATS PANEL BED
BOX 2- TW RAILS PANEL BED

Allen key 60*22*4mm
1
2Screws 8#*30mm
8
Part IMAGE DESCRIPTION QTY
3
14
1
Bolts M8*20mm
Hardware List of Luca Twin Panel Bed
SKU#
THE HARDWARE IS LOCATED IN THE PACKING ITEM
NOTE: MUST TIGHTEN SCREWS PERIODIACLLY. WITH USE SCREW
MAY ENCOME LOOSE CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8
WEEKS.
CLEANING INSTRUCTIONS:
After assembly, clean and polish the completed parts if necessary with
soft cloth and industrial recognized furniture polish.
3
1994T-1(8)
1994T-2(14)
1994T-3(1)
Note: Screwdriver will be prepared by yourshelf.

Detail view
B
D
4
A
C

STEP 1:
- Attaching Bolt (1) to Pre-holes on Headboard (A), Footboard (B).
Please be noted: "should not tighten bolts"
- Connecting the hook on Rail (C) to Bolt (1) and fasten again.
Pay attention to rail orientation.
5
1
3
1=8 Pcs
C
C
A
B

STEP 2:
Please fasten slats (D) by screw (2) into corresponding holes.
6
2
D
2=14 Pcs
That's it ! You've finished
assembling your item. Thank you!

ASSEMBLY INSTRUCTIONS
LUCA PANEL/BUNK/DAYBED TRUNDLE
SKU: 314671
314583
314627
1
15 min
ITEM NO: Y2103W-348
Y2103B-348
Y2103G-348
x 2 x 1 x 1

PART SKU# IMAGE DESCRIPTION QTY
AFront 1
2
BBack rail 1
CSide rails 2
DSlats 1
1996-A-W: (White)
1996-A-B: (Blue)
1996-A-G: (Grey)
1996-B-W: (White)
1996-B-B: (Blue)
1996-B-G: (Grey)
1996-C-W: (White)
1996-C-B: (Blue)
1996-C-G: (Grey)
1996-D
Part list

1
2
Part IMAGE DESCRIPTION QTY
3
Hardware List of Luca Trundle
SKU#
THE HARDWARE IS LOCATED IN THE PACKING ITEM
NOTE: MUST TIGHTEN SCREWS PERIODIACLLY. WITH USE SCREW
MAY ENCOME LOOSE CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8
WEEKS.
CLEANING INSTRUCTIONS:
After assembly, clean and polish the completed parts if necessary with
soft cloth and industrial recognized furniture polish.
3
4
5
6
Bolt and nut M8*70mm 8
Bolts M4*20mm 2
Dowel Ø8*40mm 4
Screws 8#*30mm 14
Allen key 60*22*4mm 1
Handle 1
1996-1(8)
1996-2(2)
1996-3(4)
1996-4(14)
1996-5(1)
1996-6(1)
Note: Screwdriver will be prepared by yourshelf.

Detail view
B
D
4
A
C
C