Living Spaces 305-S360-413 User manual

ASSEMBLY INSTRUCTIONS
DESK HUTCH - DESK w/TURN BUCKLE BASE
MADE IN VIET NAM
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come
loose inside the carton during shipment.Identify and count all Hardware and compare with the Hardware List Below.
PART LIST
1 PC
A
Qty.
No.
Back Panel
Descriptions
B1 PC
Drawing
ITEM : 305-S360-413 / 414
C1 PC
Side Rail (left & right)
D2 PCS
Shelf Top Panel
HARDWARE LIST
15 PCS1
Qty.
No.
Bolt
Descriptions Size
1/4" x 35mm
Allen Key M4 1 PC
2
Drawing
STEP 1
Shelf Bottom Panel
A
C
Page 1 of 2
1
2
1
2
STEP 2
STEP 3
STEP 4
4 PCS
3Bolt 1/4" x 20mm
Flat washer 1/4" x 19mm x 2mm
4
EMetal Rod 1 PC
4 PCS
5
Lock washer 1/4" 4 PCS
7Tipping Restraint 1 SET
6100 x 25 x 2mm 2 PCS
Bracket
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
NOTE: Do not fully tighten Bolts
until the assembly is completed.
NOTE: Do not fully tighten Bolts
until the assembly is completed.

1 PC
Desk Hutch
(305-S360-413)
1 PC
Desk w/turn buckle base
(305-S360-414)
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
MADE IN VIET NAM
PART LIST
Page 2 of 2
Desk
STEP 5
STEP 6
DESK HUTCH - DESK w/TURN BUCKLE BASE
ITEM : 305-S360-413 / 414
ASSEMBLY INSTRUCTIONS