Living Spaces Topanga Queen User manual

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in headboard carton to attach bed feet, wings and center support system.
1 2
Step#1
Retrieve bed feet from carton fastened behind the headboard.
Attach bed feet (F) to the headboard using Wrench (I), Bolt (R) and Washer (E).
Attach bed feet (F) to the footboard using Wrench (I), Bolt (R) and Washer (E).
Step#2
Attach side rails to headboard using Wrench(I), Bolt (B) and Washer (E)(factory installed).
Attach side rails to footboard using Wrench(I), Bolt (B) and Washer (E)(factory installed).
A
C
D
E
F
I
K
R
T
Φ6*15 MM
Φ8*60MM
Φ6 MM
Φ8 MM
H=10 CM
Φ8 MM
Φ8*80MM
Φ8*70MM
Φ6*20MM
8PCS
4PCS
12PCS
14PCS
4PCS
1PC
2PCS
8PCS
4PCS
Topanga Queen Assembly instructions
*Bolt B and Washer E
are factory installed*

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in headboard carton to attach bed feet, wings and center support system.
3 4
Step#3
Attach wings through Headboard finger tight, using Wrench(I), Bolt (C) and Washer (E).
Step#4
Attach wings through side rail finger tight, using Wrench(I), Bolt (K) and Washer (E)
Tighten secure wings (6 bolts) with Allen wrench until snug.
A
C
D
E
F
I
K
R
T
Φ6*15 MM
Φ8*60MM
Φ6 MM
Φ8 MM
H=10 CM
Φ8 MM
Φ8*80MM
Φ8*70MM
Φ6*20MM
8PCS
4PCS
12PCS
14PCS
4PCS
1PC
2PCS
8PCS
4PCS
Topanga Queen Assembly instructions

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning：do not move bed after final assembly as it may result in damages to floor and/or bed.~
Metal slats and center support legs are packed in side rails carton.
5 7
Step#5
Attach steel center support legs (J) to the Metal slat (G) using Wrench (I), Bolt (T) and
Washer (D).
Step#6
Move/place bed into final position in bedroom.
Step#7
Attach steel slat support system to full length steel side support cleats(flat side facing up).
Verify the metal slats are installed properly into support cleats and center support legs are
perpendicular to the floor for full support.
G
J
Metal Slats
Center support legs
4PCS
4PCS
Topanga Queen Assembly instructions