Living Spaces JAXON 313476 User manual

JAXON GREY UPHOLSTERED DINING SIDE CHAIR
LIVING SPACES SKU : 313476
VENDOR ITEM NO. : 7YU663F
ASSEMBLY PARTS LIST
CHAIR BACK
CHAIR SEAT
HARDWARE KIT PACKED IN BOX
SKU : 7YZZ66HW
1
1
SKU # IMAGE DESCRIPTION QUANTITY
4
SKU # IMAGE DESCRIPTION QUANTITY
ALLEN BOLT
(M6 X 50MM)
313476-1 7YZZ66HW-1
LEFT LEG 1
7YZZ66HW-2
7YZZ66HW-3
RIGHT LEG
LEFT STRETCHER
1
1
1
RIGHT
313476-2 4
ALLEN BOLT
(M6 X 70MM)
FLAT WASHER
(M6)
ALLEN KEY
7YZZ66HW-4
7YZZ66HW-5
7YZZ66HW-6
8
6
1
MIDDLE
STRETCHER
STRETCHER
1
LOCK WASHER
(M6) 8
WOOD SCREW
(M4X40MM)
FULLY ASSEMBLED
7YZZCPBTS DECORATIVE NUT & BOLT
PRE-ASSEMBLED PARTS LIST
SKU # IMAGE DESCRIPTION SKU # IMAGE DESCRIPTION
FOOT CAP
7YZZCPFC18
OWNER'S MANUAL
Scan QR code to view assembly video
7YU666FLL
7YU666FLR
7YU666FSL
7YU666FSR
7YU666WSM

ASSEMBLY INSTRUCTIONS
00:20
JAXON GREY UPHOLSTERED DINING SIDE CHAIR
LIVING SPACES SKU : 313476
VENDOR ITEM NO. : 7YU663F
OWNER'S MANUAL
Scan QR code to view assembly video
313476-2
7YU666FLL
7YU666FLR
7YU666FLR
7YU666FSL
7YU666FSR
7YU666WSM
7YZZ66HW-5 (2x)
7YU666FSL
7YU666FSR
7YU666WSM 313476-1
313476-1
313476-2
313476-1
7YZZ66HW-6
7YZZ66HW-2
7YZZ66HW-3
7YZZ66HW-4
1 2
3 4
5 6
7 8
ASSEMBLY COMPLETE
313476-2
x4
x4
7YZZ66HW-5
x4
Not provided
7YZZ66HW-1
7YZZ66HW-3
7YZZ66HW-4

OWNER'S MANUAL
Scan QR code to view assembly video
JAXON GREY UPHOLSTERED DINING SIDE CHAIR
LIVING SPACES SKU : 313476
VENDOR ITEM NO. : 7YU663F
WARNING:
- Maximum distributed load capacity: 300 lbs.
- This product is designed for use in a normal seated position with all legs
contacting the floor. Unintended use may result in damage or injury.
ROUTINE MAINTENANCE:
Periodically check all fittings and tighten if necessary, as they can loosen over time.
CARE AND CLEANING:
SOLID WOOD FURNITURE:
Congratulations on purchasing this handcrafted solid wood furniture product. Please keep in
mind that wood is sensitive to changes in humidity. As the weather changes so does the
relative humidity in your home and the moisture content of your solid wood furniture. We
have taken every precaution to stabilize the lumber used to build this product. Still, you may
observe plank movement or small cracks as the seasons change, particularly during the first
6-12 months of ownership. This is normal for solid wood furniture and will not affect the
performance or longevity of this product.
Dust frequently with a clean, damp, lint-free cloth. Frequent dusting will remove abrasive
build-up which can damage a finish over time. Avoid using oily polishes or waxes. Avoid
exposing your furniture to strong sunlight. Prolonged exposure to direct sunlight can fade
the finish of your furniture. Do not expose your furniture to any liquids. Never allow water
to sit on your furniture. Do not place hot items on top of surface, always use a mat or other
protector. Alcohol, nail polish and perfume are also dangerous, as they can dissolve the
furniture finish on contact and may require professional repairs.
UPHOLSTERY:
Avoid exposing your furniture to strong sunlight. Prolonged exposure to direct sunlight can
fade the finish of your furniture. To clean spots and stains, please follow instructions per the
fabric cleaning code. An annual professional cleaning is recommended to keep your
upholstery looking its best.

OWNER'S MANUAL
Scan QR code to view assembly video
JAXON GREY UPHOLSTERED DINING SIDE CHAIR
LIVING SPACES SKU : 313476
VENDOR ITEM NO. : 7YU663F
IDENTIFY AND CORRECT WOBBLY SEATING PRODUCTS:
Our seating products are tested on a leveling table prior to packaging. If after unpacking
and/or assembly your chairs wobble, follow these steps to eliminate it:
1. If your chair is fitted with leveling feet, adjust them to eliminate the wobble. Please
contact us for replacement levelers if yours are missing or damaged.
2. Verify floor protectors on the underside of the chair have not become loose or
damaged during transit or assembly. Please contact us if you need replacement floor
protectors.
3. Although they appear flat, all floors are uneven. Verify the floor is not causing the
wobble by testing the chair in other positions. If you have multiple pieces of the same
chair, some that wobble and some that don't, try reversing their positions. This will
isolate whether the chair or the floor is causing the wobble.
The following steps apply to ready-to-assemble chairs only:
4. Check assembly fittings. Turn the chair upside down. Apply light to medium cross
pressure to each leg, stretcher or other component to test whether it is installed tightly.
Use tools indicated in the assembly instructions to tighten fittings as necessary.
5. Ready-to-assemble furniture is designed with small tolerances to facilitate assembly.
Occasionally these tolerances can create a wobble, which can be eliminated by
reseating the assembly hardware as follows:
a. Loosen all fittings a few turns until they are hand tight. Fittings need to be loose
enough to be reseated but tight enough to retain their position while they are
being re-tightened.
b. Place the chair upright on a level surface
c. Apply downward pressure on the seat, especially over and around legs that may
appear to be longer than the others. Depending on the tightness of the bolts it may
require significant pressure or multiple attempts to seat the bolts correctly.
d. Once the wobble is corrected, carefully reposition the chair so that assembly
fittings are accessible. Being careful not to unseat fittings from their new
positions, re-tighten the bolts with tools indicated in the assembly instructions.