Instruction manual
5
USING INSTRUCTIONS
Before using for the first time
-Unwrap t e product, make sure your remove all packaging materials.
-Wipe parts clean wit a damp towel.
-Familiarize yourself wit eac part.
Attention: Do not add water when sharpening knife, scissor, screwdri er, otherwise will cause the risk
of electric shock.
How to sharpen the knife:
Place t e appliance on a stable surface.
Pull out t e cord and plug in wit t e outlet.
Press t e switc , motor will drive t e grinding w eel running up.
Hold t e andle and put t e edge to t e “V” groove, pull out t e knife at
even speed until t e edge reac t e bottom of t e groove, repeat
s arpening 3-4 times. (Put t e edge as close to t e front
as possible, t en t e w ole edge can be s arpened).
-“V” groove in picture 1-2 are coarse s arpening.
-picture 3-4 are fine s arpening.
- Picture 1 and 3 for s arpening t e rig t edge, picture 2 and 4
for s arpening t e left edge.
You can c oose coarse or fine s arpening according to t e s arpness of t e
edge, can coarse-s arpen and t en fine-s arpen if t e edge is duII. T is
will s orten t e time of s arpening. You only need to fine-s arpen if t e
edge is not very dull.
Turn off t e switc and cut off t e power.
Clean t e table and t e appliance, finis s arpening.
Tips and Hints
Pull out t e knife at even speed to get better s arpening.
-
Slig tly adjust t e angle of t e edge in t e “V” groove for close contact.
-
Press t e appliance w en s arpening, it will be more stable.
-
Motor will be ot after several cycles, must let t e appliance cool off before
operate again.
How to sharpen the scissor:
Connect wit power and press t e switc
Open t e scissor and old one edge.
