
Instruction Manual
6
3. It starts to heat following your temperature setting.
Note: Heating symbol will blink when it is heating and will stop blinking and you will
hear “beep-beep” when it reach your temperature setting.
4. Comb through to remove any tangles and divide the hair into sections,no more than
2cm wide.
5. Let the section of hair throuth curling chamber, press and hold
”Start” to activate the motor to draw hair into curling chamber.
6. When you hear first beep, you stop holding « Start » button and maintain hair in
curling chamber. Automatic curling is finished when you hear final beep beep.
Note : The final beep beep mentionned, is based on your setting on “Timer”.There will
be eight beeps before final double beep if your setting is 8 seconds.
Charging instructions:
1. Fully charge the battery before use for optimal operation, insert the micro USB part
into input and the other USB into any other device of your choice (computer, adaptor,
powerbank,etc).
2. Do not use while charging.
3. Disconnect the charger when the battery is fully charged.
4. While charging, the display shows a flashing indicator light. When the battery is fully
charged, the indicator stops flashing and shows 4 bars.
5. When the battery level is low, the display flashes and the unit will automatically switch
off.
Power bank function:
Take a USB cable to connect “USB output”, the other terminal
connect your device.