LockedBrands Pillar User manual

Quick Start Guide for The
LockedBrands™ Pillar™
Meet The Pillar.
The voice-activated, app-controlled lockbox.
#0271a5
#f28923

This QuickStart Guide is also
available through the app.
1

3
USB port
Reset button
On/Off switch
MAC address
The Pillar™
2

•Download The LockedBrands App to control
your Pillar
Step 1
Getting Started
3

Setting Up Your LockedBrands Account
Step 2
•Open the app on your device and follow the
on screen instructions
4

6
*In order to guarantee performance, be sure to use the supplied USB cable and power supply
Step 3
A white light will start circling the LED ring
Power up The Pillar™
• Plug in The Pillar using the supplied USB charger & cable
• Turn on the power with the “On/Off” switch
5

• Open the app and press "Set up WiFi"
• Follow the on-screen instructions (described on the next page)
Connect to WiFi
Step 4.1
6

*WiFi is 2.4 GHz only
Step 4.1
Connect to WiFi
• Open settings on your smart device
and select WiFi
• Select the Network named: “Pillar
XXXXXX” and wait for connection,
indicated by the checkmark
• It may take several minutes to
connect - Unsecured Network
warning is OK
•Go back to the LockedBrands app
7

Step 4.2
• Wait for 'Pillar Connected Succesfully' and then
press 'Continue'
• Press 'Begin Scan'
Connect to WiFi
8

• A list of available WiFi networks will appear
• Select your WiFi network and enter your password (with the
appropriate upper and lower-case characters)
• Push save
Connect to WiFi
Step 4.3
9

Connect to WiFi
• The Pillar will now reboot
•LED lights will turn red,
white, yellow, and then
blue.
• Give it about two minutes
• You are ready to go when
the base lights up in solid
blue
•If you are not seeing a
blue ring, close the app
and start over
•If you have tried again
with no luck, please call
our tech support team at
833-474-5527
Step 4.4
10

Step 5.1
Register your Pillar™
NOTE: Your device must be on the same WiFi as the Pillar you are registering
• Press the menu icon in the top left corner of the screen
• Press 'Add Lockbox'
11

• Locate the MAC address on the bottom of your Pillar
• Enter the MAC address by tapping on the empty boxes and entering
the characters two at a time
• Note: All letters displayed in the MAC address are lower-case
• Enter a name for your Pillar
Register your Pillar™
Step 5.2
12

Opening your Pillar™
Step 6
The “My Locks” page is where you can view and unlock the
Pillars registered to your account.
Just press the UNLOCK button to open your Pillar!
13

More Functions of your Pillar™
• To view and customize all of the functions your Pillar has to offer, click its
name from the “My Locks” page
• Visit the support page at www.lockedbrands.com for “How to” videos on
each function and for additional tips, tricks, and troubleshooting guides
14

#0271a5
#f28923
Patent Pending 2018 LockedBrands LLC.
LockedBrands, The Pillar and the LockedBrands logo are all trademarks of LockedBrands LLC.
All Rights Reserved.