masunt Key safe User manual
1
Key safe & Key safe plus
EN
1
Codes – The basics
The safe is supplied with two factory set codes:
Master Code: 11335577
User Code: 2244
IMPORTANT NOTE:
The factory set codes should be changed before installation!
Where the product is used in online code mode, it is advisable
to change the master code only after registration.
Master Code
All Master Codes are 8 digits long.
The Master Code:
Opens the lock
Changes the Master Code
Changes / Deletes User Code
Activates Online Codes
User Code
All User Codes are 4 digits long.
The User Code:
Opens the lock
Changes the User Code
When using the Online Code the User Code is additionally available.
Online Code
All Online Codes are 6 digits long.
The Online Code:
Opens the lock for a particular date, time and duration
2
Operating instructions
Note: The lock has a 10 button keypad and a # button.
The # button is hidden beneath the handle when in the
locked position.
·Blue LED = Code accepted ·Red LED = Code not accepted
Functions
1) Manual generation of codes (user mode) and
2) Online generation of codes (online mode)
1. Manual generated codes are default and contain of 4 digits.
2. Additionally to the manual function codes can be generated
online. These codes contain of 6 digits and can be made valid
between periods of one hour and up to 365 days.
Master Code commands
Change the Master Code
#Master Code ·01 ·New Master Code ·New Master Code ··
Example: #11335577 ·01 ·12345678 ·12345678 ··
Result: Master Code has been changed to 12345678.
Change the User Code
#Master Code ·02 ·User Code ··
Example: #11335577 ·02 ·9999 ··
Result: New User Code 9999 now operative.
Delete User Code
#Master Code ·03 ··
Example: #11335577 ·03 ··
Result: User Code deleted.
3
User Code commands
Change the User Code
#User Code ·New User Code ·New User Code ··
Example: #2244 ·6688 ·6688 ··
Result: User Code is now 6688.
Generate Online Codes
1) Creating a Codelocksportal.net account
Visit the website www.codelocksportal.net. Create a new account
by clicking on ‘Register’ (It can take up to one working day for your
account to be activated. You will be informed of the activation by
email. Please also check your Spam folder.).
2) Registering the lock
1. You can register the safe for the rst time using “New lock”.
2. Select the KL series -> Key safe 6 Digit (masunt E Code) type
as the lock model and follow the instructions on the screen.
3. After entering the sequence into the lock, assign a “Name” and
“Location” for your safe. Make sure that you do not use any
special characters. (If you own several safes, you can group
them under a common location.)
3a) Creating an online code
1. Under ‘Locks’, select the lock for which you wish to generate a
code. To start, click on ‘Generate online code’.
2. The following types of codes are available:
a) Standard (Multi-Use)
b) Standard (Single-Use)
With regard to a) These are codes that are valid for 1 hour to
7 days.
With regard to b) These are codes that are valid from 1 hour
to 7 days and that cease to be valid after being entered into the
safe once.
c) Rental – 1-21 days (Multi-Use)
4
d) Rental – Max 365 days, rst use within limits (Multi-Use);
Important: The safe must be programmed once with the follo-
wing command in order to use 365 days rental codes: #Master
code ·14 ·100 ··
IMPORTANT – General note on rental codes: A rental code that
has been validated once is always only ever valid until a new
(standard or rental) code is entered into the safe or validated.
A valid rental code is deleted as soon as a valid standard code
is entered. When a new rental code is entered / validated, the
rental code that was valid previously becomes invalid at the
end of the day on which the new rental code was entered /
validated.
With regard to c) These are long-term codes (rentals) with a
validity duration of 1 day to 21 days.
Please note that a generated code must be entered into the
lock at least once within 24 hours of the start time for it to
remain valid for the desired period of time (validate within 24
hours). If, for example, a code with a start time of 8 June 2016 is
generated for 12 days, this code must be entered into the lock
once within 24 hours of 00:00 on 8 June 2016 for it to be valid
for 12 days.
With regard to d) These are codes that are valid for 365 days
and that – depending on the type – have to be entered into the
lock once within 1 hour to 7 days starting from the start time
for the code to become valid.
If, for example, a code with a conrmation duration of 1 day is
generated with a start time of 00:00 on 8 June 2016, this code
must be entered into the lock once within 1 day of 00:00 on 8
June 2016 for it to be valid.
3. A code can then be sent by email or SMS – the choice is yours.
An individual text message can also be added to the code.
When sending an SMS, make sure you enter the mobile num-
ber with the international country code but without the +/00
prex!
5
3b) Requesting an online code by text message
Authorised persons can also request online codes independently
by text message. Authorised persons can be dened by adding
a mobile number to a whitelist (“SMS-Whitelist”). Codes can be
requested by texting the lock identication code (Clicking on a lock
in the portal displays this on the right side of the screen.) to either
+4917717870120 or +447520633332. Please ensure that the reci-
pient number is entered in the exact same format as indicated abo-
ve. Requested codes are valid during the hour they were requested
and for the subsequent hour.
Further information and special functions
Battery Power
The lock should provide well in excess of 15,000 openings from 2
x AAA 1.5v cells. For using the safe outdoors we recommend high
class lithium batteries (for example ENERGIZER Ultimate Lithium
LR92 AAA).
Battery Level Check
> 80% Charge ········
50%-80% Charge ······
20%-50% Charge ····
< 20% Charge ··
#Master Code ·09··
Example: #11335577 ·09··
Result: Both ·red LED and ·blue LED will
ash to indicate current battery status.
6
Low Battery
When the battery power is low the red LED will ash 3 times before
the blue LED lights, accepting the code. Fit new batteries as soon as
this happens. The lock will operate for 100 times with low batteries.
Battery Failure Override
The lock has been designed so an external PP3 battery can be
placed against the contact points surrounding the blue and red LEDs
so the lock can be opened to replace the batteries should they fail.
The procedure is as follows:
Place the contact points of the PP3 battery against the contact
points surrounding the blue and red LEDs. (The positive + PP3
terminal against the red LED contact point and the negative –
PP3 terminal against the blue LED.).
Enter the Master Code.
The motor will withdraw the locking pin allowing the lock to be
opened
Replacing batteries
Key safe
Note: The procedure requires the door to be open.
Unloosen both cross tip screws on the back of the lock.
Additionally unloosen the nut behind the lower screw with
no. 19 open wrench (3/4” for UK and US). It is now possible to
take the lock from the safe door and gain access to the battery
compartment.
Key safe plus
Open the door of the key safe
Remove the covering cap by loosening the four cross-headed
screws on the back of the door
Remove the four spacers that the covering cap was screwed
onto using no. 7 open wrench and then move the lock’s knob to
the closed position
Then pull the central plate upwards.
7
Remove the cross-headed screw at the bottom end of the plate
(at the height of the knob) and, at this point, lift the metal plate
below o the lock spindle, so you reach the nut securing the
spindle with a no. 19 open wrench. Remove it carefully. At the
same time, remove the cross-headed screw at the top end of
the plate through the opening in the cross. You can now
remove the lock and reach the battery compartment.
After changing the battery, carry out the installation process in
reverse order. Ensure that the rubber seal around the lock is in the
correct position.
If using the safe in the online code mode, please update nally date
and time (s. p. 16).
Resetting a lock to factory settings
Variant 1
#Mastercode ·88 ·Mastercode ··
Example: #11335577 ·88 ·11335577 ··
Result: The lock was reset to factory settings.
Variant 2
Remove one battery (Read the section entitled “Replacing
batteries” to nd out how to reach the battery compartment)
Press and hold the 1 button, replace the battery, the Blue LED
will ash twice, release the 1 button. Within three seconds
press the 1 button three times. The Blue LED and the Red LED
will ash simultaneously. The lock will have reverted to the
factory settings and all other stored settings will be erased.
8
Further specic functions (online mode only)
Change Date & Time
ATTENTION: It is mandatory to update the date and time after
replacing batteries. (The ashing of both LEDs indicates the loss of
time and date.) Further it is recommended to update the date and
time once a year. Please adjust the current local time without any
changes to the DST.
#Master Code ·12 ·YYMMDD ·HHmm ··
Example: #11335577 ·12 ·170205 ·1101 ··
Result: Lock internal clock updated to 05/02/2017 11:01.
Manual Delete of Online Code
#Master Code ·16 ·Online Code ··
Example: #11335577 ·16 ·392100 ··
Result: Online Code 392100 has been deleted.
Even top-quality stainless steel needs regular care – so treat your
product with a stainless steel care product at regular intervals.
Other manuals for Key safe
1
This manual suits for next models
1
Other masunt Safe manuals
