Safewell 25EGD User manual

For any help, kindly consult the local distributor
Please do not keep emergency keys in your safe!
Schematic drawing of case
MODEL: SAFEWELL 25EGD
INTELLIGENT ELECTRONIC LOCK SAFE
Dear valued customer:
Thank you for choosing our products! You’ve taken an important step in
organizing and protecting your most valued possessions. Every series of our
safes is professionally made and designed to provide safety. Please take
time to read and familiarize yourself with the proper operating procedures of
your new safe presented on the following pages.
Again, thank you for choosing our products!
Schematic drawing of control panel
1. Bolts
2. Reset Button
3. Battery Compartment
4. Knob(Master Key)
5. Emergency Lock Cover
6. Clear Key
7. Start & Confirming Button
12 3
MOUNTING METHOD
●Fix the safe in the place which is not easy to move.
●Drill holes for expansion bolts (or clamping screws) in the right place.
●Turn the expansion bolts counter clockwise to separate.
●Use the expansion bolts (or clamping screws) to secure the case to the wall.
●Make sure the case is mounted in place as required and then tighten all screws.
CAUTION:Use the expansion bolt when there is a concrete wall surface. Use the
clamping screw when there is a wooden wall surface.
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and components
which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste. Please dispose of this equipment
at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and electronic
products. Please help us to conserve the environment we live in!
Declaration of CE/E-mark conformity
This product complies with the requirement of the below directives:
EMC-Directive: 2004/108/EC, CE Marking: 93/68/EEC &
RoHS Directive: 2002/95/EC
The above declare that this product is in compliance with following standards:
EN61000-6-1:2007, EN61000-6-3:2007
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
• 33, Vas. Olgas avenue
P.O. 54641, Thessaloniki, Greece
Tel: [phone],
Fax: [phone]
• /www.amiridis-savvidis.gr [email protected]
• 45, Posidonos street
P.O. 18344, Moschato, Athens, Greece
Tel: [phone], Fax: [phone]

●Turn the knob (master key) counter clockwise to close the door.
CLOSING DOOR
SETTING THE MASTER CODE
●With the door open, press “#” key to start the keypad, then press “0” key twice and
reset button once, the buzzer beeps twice and the LCD display will turn blue and show
“------”.
●Input your new user code(3-8 digits), and press the “#” key.
●The display will turn blue and read “IN”, then show your new code, which means the
setting is accepted successfully and you can use your safe box by new password.
●With the door open, press the reset button once, the buzzer beep once and the
LCD display will turn blue and show “------”.
●Input your new user code(3-8 digits), and press the “#” key.
●The display will turn blue and read “IN”, then show your new code, which means
the setting is accepted successfully and you can use your safe box by new password.
SETTING THE USER CODE
TAMPER ALARM
You may set a tamper alarm that will sound if anyone attempts to move or attack the
safe.
●Press the “*” key, the display will show ALERT ON.
●To turn alarm off, press the “#” key, the current code, and then the “#” key. If no code
is input to clear an alarm, the alarm will clear after 20 seconds and the safe will be
lock automatically for 3 minutes.
Your safe is equipped with a security display feature, using this feature means that
your code will not be displayed on screen when opening safe.
●Press “#” to startup the lock.
●Press “*” in touch screen to startup the hidden code function. Any code you input
will show “----“in the display, which can ensure your code safe.
●You can press “*” twice to cancel this function.
SECURITY DISPLAY FEATURE
OPENING DOOR
●Press the “#” key.
●Input your user code (3 to 8 digits), then press the “#” key and the LCD display will
turn blue and show open.
●Turn the knob clockwise and open the door.
CAUTION: The user preset code “1234”. You may press the key "*" to clear any
incorrect digit you have input. One digit will be cleared each time when you press
the key. If the wrong code is entered 3 times consecutively, an alarm will sound for
10 seconds and the safe will be locked out for 3 minutes.
INSERTING THE BATTERIES
●Open the door.
●Insert 4AA batteries into the battery compartment.
●If by pressing “*” the display shows “LO-BATTE”, it means the voltage is low and
that you should replace the old batteries wtih new ones! Change all 4 batteries.
CAUTION:Replace 4 fresh batteries by lining them up in a manner as indicated
by the “+“ and “ - ” signs. When outage for thirty minutes or longer, you should reset
the user code.
●Remove emergency lock cover, then insert the emergency key, and turn it count
clockwise.
●Turn the knob (master key) clockwise to open the door.
OPENING YOUR SAFE FOR THE FIRST TIME
Upon first opening, users should open the safe with the emergency key. The
operation in details refers to “opening the safe with the emergency key”.
CAUTION:Finish operation, pull out the emergency key and keep it in a safe place.
Upon first receipt of the safe, or either the electronic circuit malfunction or codes
unknown you could also use the emergency key to open the safe. If the batteries
●Remove the cover of the emergency lock.
●Insert the emergency key to the key hole, turn count clockwise, then turn the knob
(master key) clockwise to open the door.
OPENING THE SAFE IN EMERGENCY
have been depleted, then you could use the external battery box to power keyboard.