Lockwood FLUID Series User manual

1
Installation Instructions for
FLUID Outside Lever Trim
DOOR PREPARATION
L
Cut spindle
Length
= L + 5 mm
1
Splindle
Cylinder
M6-90 mm
M6-90 mm
Reinforced fixing
23 4
1
2
5a
Left hand Right hand
CONTENT OF THE PACKAGE
!
ASSA ABLOY Australia Pty Limited © 2007 ASSA ABLOY the global leader in
door opening solutions
N01-1006 Ind A
Left hand
+
Captive key
Right hand
+
Captive key
2
1
5b

2
OPERATING
-Check the free movement of the follower by operating
the handle: the bolt(s) must retract without abnormal
effort.
- Check if the panic exit device works correctly by
pushing on the operating bar (with the trim locked and
unlocked).
The spindle must not be too long to avoid any pressure
onto the panic exit device. Adjust it if necessary.
12
7
CHANGING THE CYLINDER (product already installed)
Remove the key. Do not handle the cylinder during the operation
1
89
10
11
CLUTCHABLE FUNCTION
Trim locked by key Disengaged without damage Reset in original position
6
!
ASSA ABLOY is the global leader in
door opening solutions, dedicated to
satisfying end-user needs for security,
safety and convenience
Locked

45°
2
Locked = free handle
N01-1006 Ind A
Locked = free handle
1
2
X > 45Nm
3
FE5000-121