Logic IO RTCU LX5 eco User manual

Technical Manual
Version 1.00
RTCU LX5 eco
Advanced Industrial M2M/IoT Gateway

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 2 of 33 Email: [e-mail]
Denmark www.logicio.com
Introduction
The RTCU LX5 eco is a powerful M2M/IoT Gateway device that rests on an entirely new hardware
and software architecture representing a significant leap in functionality, power, openness, and
performance. The RTCU LX5 eco has been designed for the most demanding M2M and Industrial
Internet of Things applications that dictate the most advanced product available on the market.
The device is based on the new NX32L (NX32 for Linux) architecture that embraces many new
technologies and at the same time maintains full backward compatibility, which ensures already
implemented and tested NX32 applications can execute without changes.
The RTCU LX5 eco device has been designed to meet the ever-increasing security challenges. It
offers full TLS on all major protocols and includes a hardened protected execution environment
with dual-boot and automatic fallback and recovery.
This manual contains technical documentation covering the installation and usage of the RTCU
LX5 eco device. For detailed information on the product's programming and software
configuration, please refer to the RTCU IDE documentation.
For detailed information on the powerful RTCU M2M Platform, please refer to the
RTCU M2M Platform datasheet.

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 3 of 33 Email: [e-mail]
Denmark www.logicio.com
Table of contents
Introduction......................................................................................................................................................2
Important Information....................................................................................................................................4
Technical Highlights .......................................................................................................................................5
RTCU LX5 eco Overview................................................................................................................................7
Power and I/O Connector ..........................................................................................................................9
Communication Connector......................................................................................................................10
Mini USB-B Connector .............................................................................................................................10
DIN Rail Mounting........................................................................................................................................11
Power Supply.................................................................................................................................................11
Digital outputs ...............................................................................................................................................12
Digital Inputs / Ignition Input .....................................................................................................................13
Flex Analog/Digital Inputs...........................................................................................................................14
CAN bus port.................................................................................................................................................15
RS232 port.......................................................................................................................................................16
RS485 Port.......................................................................................................................................................16
1-Wire bus.......................................................................................................................................................17
3D movement sensor.....................................................................................................................................18
LED Indicators ...............................................................................................................................................19
User LED A ................................................................................................................................................19
System LED S1 and S2..............................................................................................................................19
System Reset Switch......................................................................................................................................21
Rechargeable Li-Ion Backup Battery...........................................................................................................22
LTE Cat. 1 Cellular Engine...........................................................................................................................23
SIM-Card.........................................................................................................................................................23
ISM RF.............................................................................................................................................................24
Antennas.........................................................................................................................................................25
Cellular Antenna .......................................................................................................................................25
GNSS antenna............................................................................................................................................25
RF Antenna.................................................................................................................................................25
Product Identification Label with Barcode ................................................................................................26
Power Consumption .....................................................................................................................................27
Appendices.....................................................................................................................................................28
Appendix A –Assembling/disassembling the device .........................................................................28
Appendix B –Installing the SIM-Card...................................................................................................29
Appendix C –Device Configuration Guide ..........................................................................................30
RTCU LX5 eco Specifications.......................................................................................................................32

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 4 of 33 Email: [e-mail]
Denmark www.logicio.com
Important Information
Thank you very much for using a product from Logic IO Aps. Our products are designed for
professional use, and therefore this manual assumes technical knowledge and practice working
with such products.
This documentation does not entail any guarantee on the part of Logic IO Aps with respect to
technical processes described in the manual or any product characteristics set out in the manual.
We do not accept any liability for any printing errors or other inaccuracies in the manual, unless it
can be proven, that we are aware of such errors or inaccuracies, or that we are unaware of these as
a result of gross negligence and Logic IO Aps has failed to eliminate these errors or inaccuracies
for this reason.
This product is a complex and sensitive electronic product. Please act carefully and ensure
that only qualified personnel will handle and use the device. In the event of damage to the device
caused by failure to observe the information in this manual and on the device, Logic IO Aps shall
not be required to honor a warranty claim even during the warranty period and shall be exempted
from the statutory accident liability obligation. Any attempts to repair or modify the product also
voids all warranty claims. Do not open the product. There is no user-serviceable part inside.
Please contact Logic IO for any technical or commercial inquiries:
Logic IO Aps.
Holmboes Alle 14
8700 Horsens
Denmark
Phone: [phone]
Support: suppo[email protected]
URL: www.logicio.com

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 5 of 33 Email: [e-mail]
Denmark www.logicio.com
Technical Highlights
Platform:
➢Based on the RTCU M2M Platform.
➢NX32L (NX32 for Linux) execution architecture.
oRTCU IDE development tool.
oOperates under a full and highly optimized Linux variant.
oOpen and extendable with Platform SDK.
LX Hardware Core:
➢Cortex-A7 32-bit ARM processor operating at up to 1 GHz.
➢Cortex-M4 32-bit co-processor for advanced power-management.
➢Hardware floating-point and DSP instructions.
➢128 MByte RAM.
➢512 MByte NAND Flash (system boot, persistent memory, and file-systems).
➢Real-time clock.
Security:
➢Embedded firewall.
➢Port forward and NAT services.
➢TLS/SSL support with full certificate management.
➢TLS/SSL supporting all significant TCP protocols, such as RCH, FTP, SMTP, MQTT, and sockets.
➢Hardware assisted encryption/authentication: AES-128, AES-192, AES-256, DES, TripleDES, HASH,
RND and RSA signature.
Wireless Communication:
➢LTE Cat. 1 Multi-Band Cellular Engine.
➢Internal SIM-card reader with support for eSIM.
➢Medium range ISM band RF transceiver with an on-board antenna.
➢Multi-constellation GNSS with GPS, GLONASS, and GALILEO.
Wired Communication:
➢1 x Full CAN 2.0B controller with hardware filtering and multi-speed support.
➢1-Wire bus for accessories such as ID-button reader, temperature sensors, etc.
➢1 x RS232 channel.
➢1 x RS485 channel.
I/O Interfaces:
➢3 x digital inputs.
➢2 x solid-state open-drain outputs.
➢3 x flex analog/digital inputs with 0..30 volt and 12 bit precision.
➢Expandable I/O with standard Modbus modules.
Sensors:
➢3-axis Accelerometer with 16g scale.
➢Temperature sensor.
User Interaction:
➢3 x bi-color LED.
➢High-speed Mini-USB service-port connector.

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 6 of 33 Email: [e-mail]
Denmark www.logicio.com
Audio:
➢Fully digitized audio system.
➢Transfer, store, and play audio.
➢Digitized cellular audio.
➢DTMF support for Interactive Voice Response applications.
Storage:
➢Internal flash drive with up to 64 MByte capacity.
➢Persistent memory and circular datalogger.
Power and Battery:
➢Operating voltage from 8 to 36VDC.
➢On-board 1 Ah Li-Ion battery with intelligent charging.
Encapsulation:
➢Housed in a compact UL94 V0 grade PC fire-resistant plastic encapsulation.
➢DIN rail mounting option.
Regulatory Approvals:
➢Radio Equipment Directive, RED 2014/53/EU.
➢EMC Directive, 2014/30/EU.
➢2011/65/EU RoHS Directive.

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 7 of 33 Email: [e-mail]
Denmark www.logicio.com
RTCU LX5 eco Overview

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 8 of 33 Email: [e-mail]
Denmark www.logicio.com
On the frontside of the device the Communication and Programming ports are found. Also located
on the front side is the Power and I/O connector.
Frontside
On the backside of the device, the LTE and GNSS antenna connectors are found. Also located on
this side is the small hole for the reset button.
Backside
Inside the encapsulation, the SIM-card reader and various configuration/termination jumpers are
located.
For convenience and easy installation, the front of the devices contains all connectors'
documentation and includes several tables for its layout.
LTE Antenna
Reset button
GNSS Antenna
Power and I/O connector
Prog. port
Communication
port

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 9 of 33 Email: [e-mail]
Denmark www.logicio.com
Power and I/O Connector
AIN3
8
16
AGND
AIN1
7
15
AIN2
CAN-H
6
14
CAN-L
GND
5
13
DIN3
4
12
DIN2
3
11
DOUT2
DIN1
2
10
DOUT1
XPWR
1
9
XGND
16 pin I/O connector overview
Pin
Name
Description
1
XPWR
Power supply, positive (+) connection
2
DIN1/IGN
Digital input 1 / Ignition input
3
DIN2
Digital input 2
4
DIN3
Digital input 3
5
GND
System ground
6
CAN-H
CAN bus H-signal
7
AIN1
Analog / Flex input 1
8
AIN3
Analog / Flex input 3
9
XGND
Power Ground
10
DOUT1
Digital output 1
11
DOUT2
Digital output 2
12
Not used
13
Not used.
14
CAN-L
CAN bus L-signal
15
AIN2
Analog / Flex input 2
16
AGND
Analog Ground

RTCU LX5 eco Technical Manual V1.00
Advanced Industrial M2M/IoT Gateway
Logic IO ApS. Ph: ([phone]
Holmboes Allé 14 Fax: [phone]
8700 Horsens Page 10 of 33 Email: [email protected]
Denmark www.logicio.com
Communication Connector
RS232 TXD
1
RS232 RXD
2
RS485 RSA
3
GND
4
1-Wire LED
5
RS485 RSB
6
1-Wire
7
GND
8
RJ45 communication connector
Pin
Name
Description
1
RS232 TXD
RS232 Transmit Data
2
RS232 RXD
RS232 Receive Data
3
RS485 RSA
RS485 non-inverting signal
4
GND
Signal input 3
5
1-Wire LED
1-Wire ID-Button LED
6
RS485 RBS
RS485 inverting signal
7
1-Wire
1-Wire bus
8
GND
Signal Ground
Mini USB-B Connector
This USB port is for programming and communication with the RTCU IDE (RACP compliant
application). A standard USB cable can be used between the device and the PC.