1.4.1. Activatingthefrontcamera(dip1)
If settoON,theinterfaceswitches for10secondsfromtherear-viewcameratothefront
camera inputafterhavingdisengagedthereversegear. Inaddition,amanual switch-overto
thefrontcamerainputispossiblevia keypad (shortpress)from any imagemode.
Description of the power supply output: see chapter “Power supply output”.
1.4.2. Enabling the interface’s video inputs (dip 2-3)
Onlytheenabledvideoinputscanbeaccessedwhenswitchingthroughtheinterface’s video
sources.It`s recommendedtoenable onlytherequiredinputs, forthedisabledwillbe
skippedwhenswitchingthroughthevideointerfaces inputs.
1.4.3. Rear-viewcamerasetting(dip5)
If settoOFF, theinterfaceswitches tofactory LVDS picturewhilethereverse gearisengaged
todisplay a factory rear-viewcameraor a factoryoptical parksystem picture.
If settoON,theinterfaceswitches toitsrear-viewcamerainput“Camera-IN” while the
reverse gearis engaged.
Note: Dips 4and 6 areout offunction andhave tobesettoOFF.
1.4.4. Monitorselection(dips 7-8)
Dips 6-8 areformonitor-specificvideosettings whichcannotbepredictedas evenwithinthe
samehead-unitversion,themonitorspecificationsmay vary. Itisnecessary totry all
possiblecombinations - whileaworkingvideosource is connectedtothechoseninputof the
interface - toseewhichcombinationgives thebestpicturequalityandsize(somemay give
nopicture).Itis possible tofirsthotplugthroughthedipcombinations,butifyoudonot
experienceanychangeofpictureaftertryingall options, retry anddisconnectedthe10pin
powerplugofthevideo-box betweenevery change of thedipsetting.
AftereachDip-switch-changeapower-reset oftheInterface-boxhastobeperformed!
1.5. Settingsofthe4Dipswitches(CANfunctions–red)
Dipposition UP = OFF andDOWN = ON.
