Logicor InLine Hot Water System User manual

Version / Issue Date: 17 Dec 2015
InLine Hot Water System
Control Panel User Guide
Logicor (CH) Ltd.

TABLE OF CONTENTS
i
SAFETY (PART 1 OF 2).......................................................................................... IV
Installation ...................................................................................... iv
Safety & Maintenance................................................................. iv
SAFETY (PART 2 OF 2)........................................................................................... V
Safety & Maintenance (continued)............................................v
Cleaning.......................................................................................... v
INTRODUCTION .....................................................................................................1
Control Panel.................................................................................. 2
InLine Hot Water System................................................................3
SECTION 1: HELP MODE ........................................................................................4
Help Mode ...................................................................................... 5
SECTION 2: CONTROL PANEL & HEATER SETTINGS ..............................................6
Control Panel & Heater Settings .................................................. 7
Main Settings ..................................................................................8
Wifi Settings ..................................................................................... 9
Time & Date ..................................................................................10

TABLE OF CONTENTS
ii
Tariff Settings .................................................................................11
Country Select.............................................................................. 12
Screen Options............................................................................. 13
Status Screen Options: Choose a System.................................14
Status Screen Options: Choose Readings ................................15
Brightness Settings........................................................................16
Recalibration ................................................................................17
Load Original Settings .................................................................18
InLine Hot Water System Settings...............................................19
Adjust Complete System.............................................................20
Adjust Zones..................................................................................21
Edit Zone Name & Temperature................................................22
Add New Zone .............................................................................23
Assign Water Heater Units to Zone ............................................24
Delete Zone ..................................................................................25
Adjust Water Heaters...................................................................26
Add New Water Heater ..............................................................27
Add New Water Heater: Waiting...............................................28
Add New Water Heater: Confirmation.....................................29

TABLE OF CONTENTS
iii
Edit Water Heater Name & Temperature................................. 30
Delete Water Heater Unit............................................................31
SECTION 3: STATUS SCREEN................................................................................32
Status Screen - Summary ............................................................33
Status Screen - InLine Hot Water System ..................................34
SECTION 4: COST & ENERGY SETTINGS ..............................................................35
Cost & Energy Settings ................................................................36
Adjust Cost & Energy Settings ....................................................37
SPECIFICATION: CONTROL PANEL .....................................................................38
SPECIFICATION: INLINE HOT WATER SYSTEM.....................................................39

iv
Safety (part 1 of 2)
Installation
The InLine Hot Water System must be installed by a
certified installer authorized by Logicor.
Our installers have to pass strict qualification standards
before they become approved to install our systems.
Our installers will advise and install your InLine Hot
Water System in the most suitable position.
WARNING - InLine Hot Water Systems must not be
located immediately below a wall socket outlet.
WARNING - Bathroom Installations.
InLine Hot Water Systems and control panels located
in a bathroom must be positioned so that switches
and other controls cannot be touched by a person in
the bath or shower.
Water heater units must not be installed at a height
greater than 1.8m in a bathroom.
Please follow electrical safety regulations applicable
to your country in regards to installations in bathrooms.
WARNING - Do not install the InLine Hot Water System
in a wardrobe or to a ceiling.
Our installers will advise and install your InLine Hot
Water System in the most effective position to heat the
water your property needs safely and efficiently.
Safety & Maintenance
WARNING - InLine Hot Water System units must not be
used if there is any visible damage to the outer case
or the unit itself.
InLine Hot Water Systems are robust and durable but
please avoid impacts from sharp or heavy objects: a
hammer for example. In the unlikely event that any of
the front panels of your InLine Hot Water System units
become damaged, switch the unit off from the
electrical supply if it is safe to do so and contact
Logicor (CH) Ltd.
CAUTION - Some parts of this product can become hot
and cause burns. Particular attention has to be given
where children or vulnerable people are present.
InLine Hot Water Systems operate at a normal 48°C
(118 °F).
The use of this product by young children under 8
years old or infirm persons without supervision is not
recommended. Do not allow young children to play
with the appliance.
WARNING - Do not dismantle; this appliance contains
no user serviceable parts.
In the unlikely event of you requiring service please
contact your authorised distributor or Logicor by
visiting www.logicor.co.uk.

v
Safety (part 2 of 2)
Safety & Maintenance (continued)
WARNING - If the power cord is damaged do not use
the appliance.
If the power cord is damaged it must be replaced by
the manufacturer, its service agent or similar qualified
persons to avoid a hazard.
WARNING - In order to avoid overheating, do not
cover the heater.
If you wish to dry clothes within the proximity of the
Inline Hot Water System please purchase a clothes
dryer system from Logicor.
The Logicor clothes dryer system is designed to work
with the Clear Heater System and provides a
convenient, safe and quick method to dry clothes
positioned a safe distance from the Clear Heater
System. At no point must clothing be hung directly
over an InLine Hot Water System or Clear Heater
System.
WARNING: Do not cover.
Cleaning
IMPORTANT - The InLine Hot Water System is designed
to cope with normal household dust. The water
heaters have several sensitive internal sensors; please
avoid spraying polish, hair sprays or other chemical
sprays near the InLine Hot Water System units as it may
reduce or damage the performance and can be
dangerous. Use only a clean dry cloth to clean the
InLine Hot Water System and control panel but avoid
polish, sprays or harsh abrasives.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 1
MENU ►Tip! Use the menu path headings at the top of each page to help you navigate through the screens
Introduction
Energy efficiency has never been more important,
especially where cost is concerned. InLine Hot Water
System units are very efficient themselves and when
combined with our smart touch-screen control panel
you will benefit from better, more accessible information
and control over your complete water heating costs.
Some options are only available if you have both a Clear
Heater System and an InLine Hot Water System installed.
Section 1:
Help Mode ……………………................ (Page 4)
Section 2:
Control Panel & Heater Settings …….. (Page 6)
Section 3:
Status Screen ..…………........................ (Page 32)
Section 4:
Cost & Energy Settings ......................... (Page 35)
Section 5:
Timer Settings (only available with CHS )
How to use this guide
This user guide is designed to help you get the most from
your InLine Hot Water System and understand the
different functions available on the control panel.
Your control panel has help messages associated with
each function; simply press the help icon at any time.
Use the table of contents at the beginning of this guide
to find the page number of the function you need help
with and go to that page.
The nature of the control panel options means that you
may need to back-track through the screen menus in
order to fully understand how to reach your chosen
function on the control panel.
Tip: Use the MENU ►headings at the top of each page
to find the page number of each previous screen
leading up to your chosen function.
If you are viewing a pdf copy of this guide you can click
on any page number reference or MENU ► heading at
the top of the page to go direct to that page.
Check out our website www.logicor.co.uk for product
updates.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 2
MENU ►Tip! Use the menu path headings at the top of each page to help you navigate through the screens
Control Panel
The control panel is the ‘brain’ of Logicor's heating
system and is compatible with both the Clear Heater
System (CHS) and the InLine Hot Water System (ILHWS).
The control panel is recommended by the Energy Saving
Trust for its energy saving abilities.
Once the control panel and heater units are plugged
into the wall socket they are ready to communicate with
each other using the electrical mains wiring in your
home.
The control panel is also equipped with Wifi capability to
receive software updates via the internet. A new feature
to be launched in 2015 will be the ability to connect via
your Smartphone or iPad.
The control panel is pre-programmed to work out of the
box but you can change the settings at any time with
your own preferences.
For example, you can change the name and
temperature of each water heater unit or assign water
heater units to work in named zones (e.g. all bathrooms).
Use the touch screen LCD to select options or type in
your data. The menu icons on the left of the display are
your starting point for each of the following sections.
Section 1:
Help Mode ……………………................ (Page 4)
Section 2:
Control Panel & Heater Settings …….. (Page 6)
Section 3:
Status Screen ..…………........................ (Page 32)
Section 4:
Cost & Energy Settings ......................... (Page 35)
Section 5:
Timer Settings (only available with CHS )

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 3
MENU ►Tip! Use the menu path headings at the top of each page to help you navigate through the screens
InLine Hot Water System
Our new InLine Hot Water System (ILHWS) is powered by
electricity and is designed to replace your existing water
boiler and storage tank in your home. If you also have
our Clear Heater System installed it will remove the need
for gas in your home altogether.
Existing Clear Heater customers will be able to use their
current smart control panel to monitor and change the
settings of the new system.
Automatic software updates via Internet will allow the
InLine Hot Water System to be added to an existing
Control Panel unit. The InLine Hot Water System is
Bluetooth enabled and also communicates via the
electrical ring main in your home or office.
Water in different parts of the UK varies in the amount of
dissolved mineral ions it contains. A water softener is
supplied with all units and must be mandatorily fitted in
all instances to maintain the performance of the system.
Safety features include an anti-scald valve, thermal cut
out, multiple flow and temperature sensors all controlled
from a bespoke minicomputer.
Advantages:
With our system you can select the amount of water
you want to heat so you will never have an
unexpected bill.
Monitor precisely the number of litres of water you use
in a day/week/month and keep track of the costs in
real time.
Flow rate is independent of selected water
temperature. The system reacts quickly so the running
of a kitchen tap will not affect the temperature of a
bathroom shower.
Our system is proactive and monitors its own
performance. In the unlikely event of you needing to
change a unit to service it will take less than 30
minutes.
Our InLine Hot Water System is guaranteed for 20 years
from the original date of installation.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 4
MENU ►Help Icon
Section 1: Help Mode
Select the Help Icon on your control panel display then turn to page 5.
Section 1:
Help Mode ……………………................ (Page 4)
Section 2:
Control Panel & Heater Settings …….. (Page 6)
Section 3:
Status Screen ..…………........................ (Page 32)
Section 4:
Cost & Energy Settings ......................... (Page 35)
Section 5:
Timer Settings (only available with CHS )

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 5
MENU ►Help Icon
Help Mode
The help icon is always there at the top left of your
screen to give you additional information about the
current control panel display.
Pressing the screen again takes you back to your
previous screen.
Options:
Press ‘Help’Icon
Touch the help icon at any time to enter help mode.
The associated help message appears in the pop-up
box.
‘Exit’Help
Press anywhere on the screen to take you back to
your previous display.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 6
MENU ►Settings Icon
Section 2: Control Panel & Heater Settings
Select the Temperature Icon on your control panel display then turn to page 7.
Section 1:
Help Mode ……………………................ (Page 4)
Section 2:
Control Panel & Heater Settings …….. (Page 6)
Section 3:
Status Screen ..…………........................ (Page 32)
Section 4:
Cost & Energy Settings ......................... (Page 35)
Section 5:
Timer Settings (only available with CHS )

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 7
MENU ►Settings Icon
Control Panel & Heater Settings
Selecting the Settings Icon brings you to the main control
panel and heater settings menu.
From here you can change the main settings of your
control panel or load the original factory settings to reset
the control panel completely and delete your saved
preferences.
If you have a CHS installed you have additional settings
to change that system.
All your hot water settings can be changed from the
InLine Hot Water System option.
Options:
Main settings (Page 8)
Adjust the main settings of the control panel, including
Wifi, time and date, tariff settings, units of
measurement and screen display options.
Load original settings (Page 18)
Load the original factory settings if you want to reset
the system back to its factory settings. You will be
asked to confirm your choice on the next screen or
cancel.
Clear Heater System
Note: Only available with a CHS installation.
Clear Heater Clothes Dryer
Note: Only available with a CHS installation.
InLine Hot Water System (Page 19)
Adjust your water heating preferences for individual
heater units or create water heater zones to adjust
multiple heaters together.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 8
MENU ►Settings Icon (p. 7) / Main settings
Main Settings
Set up your control panel preferences by choosing one
of the displayed options, or click the back arrow button
to go back to the previous menu.
Options:
Wifi settings (Page 9)
Amend your Wifi settings to enable the control panel
to connect to the internet for software updates or
access your control panel via your Smartphone.
Time & date (Page 10)
The time and date is needed for the control panel to
accurately regulate your heater system and provide
you with up to date performance and cost data.
Tariff settings (Page 11)
Enter your tariff rate to get accurate cost and
performance data for your system.
Country select (Page 12)
Select your country to automatically set the date, time
and units of measurement settings. This is required to
calculate and display your cost performance targets
Screen options (Page 13)
Edit which status messages appear on the main status
screen or change the control panel screen brightness
levels and touch-screen settings.
Frost & Fireguard
Note: Only available with a CHS installation.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 9
MENU ►Settings Icon (p. 7) / Main settings (p.8) / Wifi settings
Wifi Settings
Amend your Wifi settings to enable your control panel to
connect to the internet for software updates. A
Smartphone can also function as a Wifi Hotspot.
Connecting to the internet also allows you to access
your control panel via your Smartphone.
Use the keypads to type in your settings and press the
save button to store your settings.
The INFO message at the top displays the current Wifi
status.
Options:
Manual setup
Enter your network name or SSID (service set identifier)
and password to add your Wifi network to the control
panel. Use the keypads to type in your settings and
press the save button to store your settings.
Connect to an available network
Choose from the list of available networks and touch
once to connect or unselect by touching the screen
option again.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 10
MENU ►Settings Icon (p. 7) / Main settings (p.8) / Time & Date
Time & Date
The time and date is needed for the control panel to
accurately regulate your water heater system and
provide you with up to date performance and cost
data.
Once set, you should not need to adjust the time and
date again if your control panel is connected to the
internet. Time and date updates will then be automatic.
Alternatively, use the 'Country Select (Page 12)' option to
automatically set the correct time, date, currency and
temperature units.
Options:
Enter time
Enter the current time by first selecting that area on
the screen.
The time format is Hours: Minutes: Seconds
Use the keypads to type in your settings and press the
save button to store your settings.
Enter date
Enter the current date by selecting that area on the
screen.
The date format is Day / Month / Year.
Use the keypads to type in your settings and press the
save button to store your settings.
Manually change temperature units
Temperature units are automatically selected by using
the Country Select (Page 12) option. Manually
change your preferred temperature units by tapping
the screen:
- Select Degrees Fahrenheit or;
- Select Degrees Centigrade.
Press the save button to store your settings.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 11
MENU ►Setting Icon (p. 7) / Main settings (p.8) / Tariff settings
Tariff Settings
Entering your electricity and metered water charge tariff
allows accurate cost and performance data feedback
for your system.
Your tariff settings can be found on your utilities bill, or by
contacting your service provider.
Please remember to amend your tariff rate on the
control panel if and when your tariff changes.
Options:
Enter your electricity tariff
Enter your electricity tariff per kWh by first selecting
that area on the screen. Use the keypads to type in
your settings and press the save button to store your
settings.
Enter your water charge tariff
Enter your metered water charge tariff per cubic
metre of cold water by first selecting that area on the
screen. Use the keypads to type in your settings and
press the save button to store your settings.
Tip:
15p is entered as 0.1500 GBP
20p is entered as 0.2000 GBP

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 12
MENU ►Settings Icon (p. 7) / Main settings (p.8) / Country select
Country Select
Setting your location allows your control panel to
automatically set the correct time, date, currency and
units of measurement settings. These are required to
display and calculate your cost performance targets
and the system temperature accurately.
Alternatively you can change the units of temperature
manually via the Time & Date screen on page 10.
Options:
Select your country
Touch the screen to select your country location. If
your country is one where the CHS or ILHWS is
available the time, date, currency and units of
measurement will be automatically set.
Press the save button to store your entry.
Adjust time zone
If necessary adjust the time zone manually by tapping
above or below the time zone reading.
Press the save button to store your entry.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 13
MENU ►Settings Icon (p. 7) / Main settings (p.8) / Screen options
Screen Options
Screen options allow you to change how your control
panel looks and adjust the touch-screen settings.
Choose which performance data appears on the main
status screen by selecting ‘Status screen options’.
Change the screen brightness and energy saving
settings by selecting ‘Brightness settings’.
'Touch recalibration' allows you to fine tune the touch-
screen sensitivity settings.
Options:
Status Screen Options (Page 14)
Choose which performance data appears on the
main status screen.
Brightness Settings (Page 16)
Change the screen and LED brightness levels, or adjust
the how long the screen stays on before switching into
energy saving mode.
Touch Recalibration (Page 17)
'Touch recalibration' adjusts the control panel
sensitivity settings.
Choose this option to start the recalibration process
where you’ll be asked to touch a white dot at the top-
left, bottom-right and middle of the screen to
automatically calibrate the screen.

© 2015 Logicor (CH) Ltd clear-heater.co.uk Page 14
MENU ►Settings Icon (p. 7) / Main settings (p.8) / Screen options (p.13) / Status screen options
Status Screen Options: Choose a System
You can choose which performance data appears on
the main status screen. First choose your heater system
from the list. If you only have one heater system
available only one option will be listed.
Please check our website for product updates.
Options:
Choose Clear Heater System
Choose this option to adjust the performance data
readings if you have a Clear Heater System
installation.
Choose InLine Hot Water System (Page 15)
Choose this option to adjust the performance data
readings for your InLine Hot Water System.