Logitech Cordless Presenter User manual

English 1
Welcome!
Give professional presentations
with your Logitech®Cordless
Presenter™without the hassle
of cords or the limitation of
line-of-sight operation with
your notebook computer or PC.
This cordless device uses
Bluetooth™Technology to
transmit data up to 30 feet
(10 meters). With its technical
simplicity and comfortable
shape, it lets you focus on
your delivery. Conveniently
placed Forward and Back
buttons help you page through
slides effortlessly, and a built-in
laser pointer gives you
the option of highlighting key
concepts on-screen with
the touch of a button.
Change modes with a single
switch to use your Logitech®
Cordless Presenter™ on
a tabletop as a two-button
optical mouse with scroll
buttons. And while in Mouse Mode, you can assign special operations, such as double-click, to one of the mouse
buttons using Logitech’s MouseWare®software.
Forward button
Back button
Scroll down button
Scroll up button
Laser pointer
button
Mode switch
Logitech®Cordless Presenter™
Connection
status LED
Light for laser
pointer exits
here
Connect button
Battery
compartment
door
Battery status LED
Top View Bottom View

2English
Connect the Mini-receiver
The Logitech®Cordless Presenter™
communicates with your notebook
computer or desktop PC via a mini-
receiver.
The mini-receiver plugs directly
into the USB port of your computer
(picture 1).
For added convenience,
use the extension cable (picture 2).
The mini-receiver’s red LED will blink
quickly for 15 minutes until a radio
frequency connection is made with
the presentation device. You make
this connection by pressing the
Connect button on the Logitech®
Cordless Presenter™.
If this connection is not made within
15 minutes after plugging the mini-
receiver into the USB port, the mini-
receiver will time out. (The mini-
receiver’s red LED will blink slowly.)
To establish a connection, press the
Connect button on the mini-receiver
(picture 3), then press the Connect
button on the presentation device.
12
3
Mini-receiver
Mini-receiver
Extension cable
USB port
Connect button on bottom
of mini-receiver
USB port

English 3
Install the Batteries
The Logitech®Cordless Presenter™uses two AA alkaline batteries.
Install the batteries before installing the software.
1. Remove the battery door (picture 1). Place your thumb
on the indentation at the top of the battery door. Gently press down
and carefully slide the door off.
2. Insert the batteries (picture 2). Use the diagram inside
the battery compartment to install the batteries correctly.
3. Replace the battery door (picture 3). Align the battery door
in the groove that outlines the battery compartment. Carefully slide
the battery door forward to secure it. Do not force the door;
it should
slide easily into place.
Battery Status LED
•The Battery Status LED above the Back (right) button is green
for two seconds after the presentation device is switched on.
•The Battery Status LED turns red and blinks slowly when battery
power is low. (Replace the batteries.)
•The Battery Status LED is red continuously when battery power
is nearly gone. (Replace the batteries immediately.)
Battery Life
When not in use, make sure to move the Mode Switch to the Off
position to conserve battery power. Depending upon usage, battery life
is estimated to be from 60-to-100 hours.
1
2
3

4English
Battery Warning!
When battery power is low for the presentation device,
the Battery Status LED turns red and blinks slowly.
In addition, the cursor on your screen may not move,
it may move erratically when you move the presentation
device, or the MouseWare®software may display a dialog
box in Windows®98, Windows®98 SE, Windows®2000,
Windows®Me, and Windows®XP suggesting that you
change the batteries. It is recommended that you
promptly change your batteries to avoid any battery
leakage. (See “Battery Status LED” and “Battery Life” in
this manual for more information.)
If your batteries leak, use normal precaution and follow
the battery manufacturer's recommendations.
When replacing batteries, use alkalines. You may use
other battery types, but do not mix them with alkaline
batteries.
Note that the battery level indicator in the Mouse
Properties is calibrated for alkaline batteries only,
and will not give an accurate indication of battery life
for batteries other than alkalines.
Discard all used batteries according to the battery
manufacturer's instructions. Exercise care when handling
batteries.
When batteries are misused, they may explode or leak,
causing burns and personal injury. Do not open a battery
or mutilate, dispose of in a fire, expose to heat above
130° F (54° C), immerse in water, install improperly,
or recharge.
Conducting materials, such as rings, bracelets, and keys,
can short out a battery causing it to overheat and
possibly leak or explode. When you are not using
your presentation device for long periods of time,
remove the batteries and store them in a dry place
at normal room temperature.
Install the Software
To use all the features of the Logitech®
Cordless Presenter™, make sure to install the software.
1. With your computer running,
insert the software CD into the CD-ROM drive
of the computer.
2. Follow the on-screen instructions to finish
installing the software.
3. Use the software wizard to setup the
presentation device.

English 5
Establish a Connection - Important!
1. Make sure you have connected the mini-receiver to the USB port
of your computer, installed the batteries in the presentation device,
and have installed the software.
2. Turn on the presentation device by moving the Mode switch to either
Mouse Mode or Presentation Mode.
3. Press and release the Connect button on the presentation device
(picture 1). The presentation device emits a “beep.” The Connection Status
LED above the Forward (left) button is red and blinks fast until a connection
is made; then it turns green and blinks slowly. You have now established
a connection between the presentation device and the mini-receiver.
4. If a connection has not been made and the Connection Status LED
on the presentation device is slowly blinking red, press the Connect
button on the bottom of the mini-receiver (picture 2), then press
the Connect button on the presentation device.
Connection Status LED and Communication Range
•After connection, the Connection Status LED blinks green to indicate each time
a data packet has been sent from the presentation device to the mini-receiver.
•Should the presentation device move out of range from the mini-receiver,
the Connection Status LED on the presentation device turns red and blinks fast as long as the presentation device
is out of range.
Using the Presentation Device
The Logitech®Cordless Presenter™has two modes: Presentation Mode and Mouse Mode. Use the Mode switch
on the bottom of the presentation device to turn on the device and to switch between these two modes.
Connect button on bottom
of mini-receiver
2
1
Press connect
button

6English
Presentation Mode
In Presentation Mode,
the Forward (left) button
displays the next screen
(or page). The Back
(right) button displays
the previous screen
(or page). You can change
these button assignments
using MouseWare®.
The Laser Pointer button
on the buttom of
the presentation device
is operational in both
Presentation and Mouse
Modes. Point the device
at the screen and press this button to project a red dash,
which you can use as a pointer during your
presentations.
Note The scrolling buttons do not work in Presentation
Mode, nor can you use the presentation device
as a traditional two-button mouse in this mode
and navigate on screen.
Mouse Mode
In Mouse Mode, the
Forward (left) button
performs a “click/select”
function. The Back (right)
button performs
a “context/alt select”
function. You can change
these button assignments
using MouseWare®.
To scroll up, press the
Scroll Up button. To scroll
down, press the Scroll
Down button. Note that
the scrolling buttons will
make a “buzzing” sound
when pressed.
Mode Switch
Presentation mode
Mode Switch
Mouse mode
Scroll up button
Scrolling Buttons
Scroll down button

English 7
International Standards and Safety
Laser Pointer Warning!
LASER RADIATION: DO NOT STARE
INTO LASER BEAM; CLASS 2 LASER PRODUCT.
This device has no serviceable parts included.
•User-observable light power in normal operation:
less than 1 milliwatt (mW)
•Laser beam: continuous
•Laser Wavelength: between 640 – 660 nm
Rated as a commercial product for operations
at: 0° C - 40° C (32° F - 104° F)
This product has been tested to comply with
international standard (EN60825-1:1993 +
amd.1:1997 + amd.2:2001). The standard requires
the following statement:
CAUTION: Use of controls or adjustments or
performance of procedures others than those specified
herein may result in hazardous radiation exposure.
•Do not allow minors to use the laser pointer
unsupervised. Laser pointers are not toys.
• Avoid direct eye exposure.
• Never shine the laser pointer at anyone. The laser
pointer is designed to illustrate inanimate objects.
•Do not point the laser pointer at mirror-like surfaces.
A reflected beam can act like a direct beam on
the eye.
Power Saving
After 30 minutes of inactivity, the Logitech®Cordless
Presenter™enters a power saving state. To re-activate
the presentation device, press a button, move the device
(Mouse Mode), or press one of the scrolling buttons
(Mouse Mode). It takes about five seconds to re-establish
a radio-frequency link with the mini-receiver.
Carrying Case
Please use the carrying case to protect the Logitech®
Cordless Presenter™ . The laser window on this device
is sensitive to dust, scratching, and finger prints.
Clean the laser window occasionally with a soft cloth.

8English
Using MouseWare®
In both Presentation and Mouse Modes, the functionality of the Forward and Back (left and right) buttons can be
changed using the Buttons page in MouseWare®. However, you cannot modify the scrolling buttons.
To launch MouseWare®, select Start/Programs/Logitech MouseWare/Mouse Properties, or click the mouse icon
on the Taskbar. To change button assignments, click the Button’s Tab. Refer to the online help for more information
about making button assignments.

English 9
Troubleshooting*
Presentation Device Does Not Work After Installation
•Make sure you have connected the mini-receiver correctly. Make sure you have installed the batteries correctly.
Verify that the batteries are good.
•Make sure you have switched the presentation device on to either Presentation Mode or Mouse Mode. If you are
working in Presentation Mode, make sure you are within 30 feet (10 meters) of the mini-receiver and you have set
the Mode Switch to Presentation Mode. If you are working in Mouse Mode, make sure you have set the Mode
Switch to Mouse Mode.
•Manually establish communication between the mini-receiver and the presentation device. Press the Connect
button on the mini-receiver first, then press the Connect button on the presentation device.
Presentation Device Does Not Work With Other Bluetooth™Devices
A specific Bluetooth™profile is required for the Logitech®Cordless Presenter™. It is recommended that the Logitech®
Cordless Presenter™only be used with its mini-receiver.
The Back (Right) Button Does Not Work With PowerPoint®97.
Make sure that you have installed the MouseWare®software.
Important Ergonomic Information
Long periods of repetitive motions using an improperly set-up workspace, incorrect body position, and poor work
habits may be associated with physical discomfort and injury to nerves, tendons, and muscles. If you feel pain,
numbness, weakness, swelling, burning, cramping, or stiffness in these areas, see a qualified health professional.
For more information, please read the Comfort Guidelines located on the Logitech®software CD and on the Logitech®
web site at http://www.logitech.com/comfort.
Product Warranty
Your product comes with a limited five-year warranty. For more information, refer to the Product Warranty section
of the User’s Guide located on the Logitech®software CD.
*For troubleshooting information, also refer to the User’s Guide on the Logitech®software CD, which was copied to your computer’s hard drive.