Logitech ZONE WIRELESS PLUS Assembly Instructions

ZONE WIRELESS PLUS RECEIVER
Complete Setup Guide
Guide d'installation complet

CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . .7
Español . . . . . . . . . . . . . . . . 11
Português . . . . . . . . . . . . . . 15

WHAT’S IN THE BOX
USB-A Unifying + Audio receiver
USB-A Unifying™
+ Audio receiver
Light indicator
KNOW YOUR PRODUCT
3English

USB-A
Zone Plus connected
With Zone Plus you can connect up to 6
mice and keyboards.
Add mouse or keyboard
Done
CONNECTING THE RECEIVER TO THE HEADSET
1. Insert the receiver into the computer USB-A port.
2. Install and open Logi Tune Desktop. Download it from
www.logitech.com/logitune
3. Logi Tune Desktop will conrm that a new receiver is
found. Click Done to start connecting to the headset.
4English

Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Zone Wireless connected
Your headset is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Power
4. Enter pairing mode on headset by pressing the
power button for 3 seconds. Click Continue.
5. If pairing mode is successful, light indicators
on the receiver and headset will ash white.
6. Once you see this screen, the receiver is now
paired with the headset. Light indicators on
the receiver and headset will turn solid white.
5English

73%
Zone Wireless
SOUND SETTINGS
About the headset
Firmware update available
Add mouse or keyboard
Voice prompt
Rotate to mute
Button functions
Sleep settings
1 hourZone WirelessDevice name
Dongle support multiple devices
RECEIVER:
Height x Width x Depth: 35.5 mm x 16.2 mm x 5.3 mm
DIMENSIONS
www.logitech.com/support/zone-wireless-plus-receiver
© 2020 Logitech, Logi and the Logitech Logo are trademarks or registered trademarks of Logitech
Europe S.A. and/or its aliates in the U.S. and other countries. Logitech assumes noresponsibility
for any errors that may appear in thismanual. Information contained herein issubject to change
without notice.
7. With Zone Wireless Plus receiver, you can pair 6 or
more Logitech Unifying peripherals.
a. On Logi Tune Desktop, go to Settings and click
Add mouse or keyboard.
b. If you already have the Unifying Software installed
on your computer, it should open. If not, it will be
downloaded and installed automatically.
c. Follow the Unifying Software prompts to
complete adding your mouse and keyboard.
d. To add more devices, follow steps 2 and 3 and
follow the steps in the Unifying Software.
6English

CONTENU DU COFFRET
Récepteur USB-A Unifying + audio
Récepteur USB-A
Unifying™+ audio
Témoin lumineux
PRÉSENTATION DU PRODUIT
7Français

USB-A
Zone Plus connected
With Zone Plus you can connect up to 6
mice and keyboards.
Add mouse or keyboard
Done
CONNEXION DU RÉCEPTEUR AU CASQUE
1. Insérez le récepteur dans le port USB-A
del'ordinateur.
2. Installez et ouvrez Logi Tune Desktop. Téléchargez-le
àl'adresse www.logitech.com/logitune
3. Logi Tune Desktop conrmera qu'un nouveau
récepteur a été trouvé. Cliquez sur Terminé pour
commencer à vous connecter au casque.
8Français

Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Zone Wireless connected
Your headset is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Alimentation
4. Accédez au mode de couplage sur le casque en
appuyant sur le bouton d'alimentation pendant
3 secondes. Cliquez sur Continuer.
5. Si le mode de couplage réussit, les témoins
lumineux du récepteur et du casque clignotent
en blanc.
6. Une fois que vous voyez cet écran, le
récepteur est maintenant couplé avec le
casque. Lestémoins lumineux du récepteur et
ducasque deviennent blancs xes.
9Français

73%
Zone Wireless
SOUND SETTINGS
About the headset
Firmware update available
Add mouse or keyboard
Voice prompt
Rotate to mute
Button functions
Sleep settings
1 hourZone WirelessDevice name
Dongle support multiple devices
RÉCEPTEUR:
Hauteur x Largeur x Épaisseur:
35,5 mm x 16,2 mm x 5,3 mm
DIMENSIONS
www.logitech.com/support/zone-wireless-plus-receiver
© 2020 Logitech, Logi et le logo Logitech sont des marques commerciales ou déposées de Logitech
Europe S.A. et/ou de ses sociétés aliées aux États-Unis et dans d'autres pays. Logitech décline
toute responsabilité en cas d'erreurs dans ce manuel. Les informations énoncées dans ce document
peuvent faire l'objet de modications sans préavis.
7. Avec le récepteur Zone Wireless Plus, vous pouvez
coupler 6 périphériques Logitech Unifying (ou plus).
a. Sur Logi Tune Desktop, accédez à Paramètres et
cliquez sur Ajouter une souris ou un clavier.
b. Si le logiciel Unifying est déjà installé sur votre
ordinateur, il devrait s'ouvrir. Si ce n'est pas le cas,
il sera téléchargé et installé automatiquement.
c. Suivez les invites du logiciel Unifying pour
terminer l'ajout de votre souris et de votre clavier.
d. Pour ajouter d'autres dispositifs, suivez les étapes 2
et 3, et suivez les étapes du logiciel Unifying.
10 Français

CONTENIDO DE LA CAJA
USB-A Unifying + receptor de audio
USB-A Unifying™
+receptor de audio
Indicador luminoso
COMPONENTES DEL PRODUCTO
11 Español

USB-A
Zone Plus connected
With Zone Plus you can connect up to 6
mice and keyboards.
Add mouse or keyboard
Done
CONECTAR EL RECEPTOR A LOS AUDÍFONOS
1. Inserta el receptor en el puerto USB-A dela
computadora.
2. Instala y abre Logi Tune para escritorio.
Descárgalodesde www.logitech.com/logitune
3. Logi Tune para escritorio conrmará que se encontró
un nuevo receptor. Haz click en Listo para comenzar
a conectar tus audífonos.
12 Español

Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Zone Wireless connected
Your headset is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Encendido
4. Entra en modo de emparejamiento en los audífonos
presionando el botón de encendido por 3 segundos.
Haz click en Continuar.
5. Si el modo de emparejamiento es correcto,
losindicadores luminosos del receptor
ydelosaudífonos emitirán destellos blancos.
6. Cuando veas esta pantalla, el receptor estará
emparejado con los audífonos. Los indicadores
luminosos del receptor y de los audífonos
seiluminarán con luz blanca permanente.
13 Español

73%
Zone Wireless
SOUND SETTINGS
About the headset
Firmware update available
Add mouse or keyboard
Voice prompt
Rotate to mute
Button functions
Sleep settings
1 hourZone WirelessDevice name
Dongle support multiple devices
RECEPTOR:
Altura x Anchura x Profundidad:
35,5 mm x 16,2 mm x 5.3 mm
DIMENSIONES
www.logitech.com/support/zone-wireless-plus-receiver
© 2020 Logitech, Logi y el logo de Logitech son marcas comerciales o registradas de Logitech Europe
S.A. y/o sus liales en Estados Unidos y otros países. Logitech no asume ninguna responsabilidad por
la presencia de posibles errores en el presente manual. La información aquí contenida está sujeta a
posibles cambios sin previo aviso.
7. Con el receptor Zone Wireless Plus, puedes emparejar
seis o más periféricos Logitech Unifying.
a. En Logi Tune para escritorio, ve a Ajustes y haz
click en Agregar mouse o teclado.
b. Si ya tienes el software Unifying instalado en tu
computadora, debería abrirse. Si no, se descargará
e instalará automáticamente.
c. Sigue las indicaciones del software Unifying para
completar la adición del mouse y el teclado.
d. Para agregar más dispositivos, sigue los pasos 2
y3y sigue los pasos en el software Unifying.
14 Español

ITENS INCLUÍDOS NA EMBALAGEM
USB-A Unifying + receptor de áudio
USB-A Unifying™
+Receptor de áudio
Indicador de luz
CONHECER O PRODUTO
15 Português

USB-A
Zone Plus connected
With Zone Plus you can connect up to 6
mice and keyboards.
Add mouse or keyboard
Done
CONEXÃO DO RECEPTOR AO HEADSET
1. Insira o receptor na porta USB-A docomputador.
2. Instale e abra o Logi Tune Desktop. Faça o download
em www.logitech.com/logitune
3. O Logi Tune Desktop conrmará que um novo
receptor foi encontrado. Clique Concluído para
começar a conectar ao headset.
16 Português

Connecting to your headset
Keep your receiver plugged in during the
connection process and make sure your
headset for is in pairing mode.
Cancel pairing
Zone Wireless connected
Your headset is ready to use.
Done
New receiver found
Press and hold the paring button on your
headset for 3 sec to enter pairing mode.
Show me how
Continue
Energia
4. Entre no modo de pareamento no headset
pressionando o botão liga/desliga por
3segundos. Clique em Continuar.
5. Se o modo de pareamento for bem sucedido,
os indicadores luminosos no receptor e no
headset piscarão em branco.
6. Depois de ver esta tela, o receptor estará
pareado com o headset. Os indicadores
luminosos no receptor e no headset carão
brancos sólidos.
17 Português

73%
Zone Wireless
SOUND SETTINGS
About the headset
Firmware update available
Add mouse or keyboard
Voice prompt
Rotate to mute
Button functions
Sleep settings
1 hourZone WirelessDevice name
Dongle support multiple devices
RECEPTOR:
Altura x largura x profundidade:
35,5 mm x 16,2 mm x 5,3 mm
DIMENSÕES
www.logitech.com/support/zone-wireless-plus-receiver
© 2020 Logitech, Logi e o Logotipo da Logitech são marcas comerciais ou marcas registradas
da Logitech Europe S.A. e/ou de suas liais nos EUA e em outros países. A Logitech não se
responsabiliza por quaisquer erros possíveis neste manual. As informações aqui contidas estão
sujeitas a alterações sem aviso prévio.
WEB-621-001815 002
7. Com o receptor Zone Wireless Plus, você pode parear
seis ou mais periféricos Logitech Unifying.
a. No Logi Tune Desktop, vá para Congurações
eclique em Adicionar mouse ou teclado.
b. Se você já possui o Software Unifying instalado
noseu computador, ele deve abrir. Caso contrário,
ele será baixado e instalado automaticamente.
c. Siga as instruções do Software Unifying para
completar o adicionamento do seu mouse
eteclado.
d. Para adicionar mais dispositivos, siga as etapas 2
e3 e siga as etapas no Software Unifying.
18 Português