Logitech Z313 User manual

Z313 SPEAKER SYSTEM WITHSUBWOOFER
Complete Setup Guide
完整设置指南
完整設定指南
설치 가이드

English 3
KNOW YOUR PRODUCT
Subwoofer
Volume control
Power LED
Two satellite speakers
Power On /Standby button
Headphone jack
Satellite to subwoofer
cable
Control pod
Power cord
3.5 mm audio
cable

English 4
CONNECT THE SPEAKERS
1. Plug satellites cable into the subwoofer jack.
2. Plug the power plug into an electrical outlet.
3. Insert the 3.5mm connector from the control pad into the audio jack on your device (e.g. computer).
4. Press the power button on the control pod to turn the speakers on.
2
4
1
3

English 5
www.logitech.com/support/Z313
CONNECT YOUR HEADPHONES
To use headphones with your Z313 speakers, plug them into
theheadphone jack on the control pod.
To change the volume of your headphones, adjust the volume
from your audio input source.
NOTE: The volume control on the control pod does not control
theheadphone volume
ADJUST THE VOLUME
Increase (or decrease) the speakers volume by rolling up (or down)
the wheel located on the left side of the control pod.