Logitech z333 User manual

Z333 SPEAKER SYSTEM
WITHSUBWOOFER
Complete Setup Guide

English 3
KNOW YOUR PRODUCT
Wired
control pod
Power plug
3.5mm cable
Volume control knob
Headphone jack
Subwoofer
Bass control
RCA cable
tosubwoofer
Power on/o
button
Left satellite
Right satellite

English 4
CONNECT THE SPEAKERS
1. Plug the black RCA connector on the right satellite into the black subwoofer jack.
2. Plug the blue RCA connector on the left satellite into the blue subwoofer jack.
3. Plug the power plug into an electrical outlet.
21
3

English 5
CONNECT TO AUDIO SOURCE
1A. For 3.5 mm connection:
Connect the 3.5mm plug from the subwoofer to the audio jack on your device (computer, tablet, smartphone, etc.)
1B. For RCA connection:
Connect one end of the RCA cable to the corresponding RCA jack on the back of the subwoofer.
Insert the other end of the RCA cable into the RCA outlet on your device (TV, Gaming Console, etc)
Note: The RCA cable is not included in the box and must be purchased separately.
2. Plug your headphones into the headphone jack on the control pod. Adjust the volume either from the control pod orthe
audio source.
3. Power speakers on/o by sliding the power on/o button on the wired control pod.
1A 1B
2 3
3.5mm
ON / OFF
ON / OFF

English 6
CONNECT TO TWO DEVICES SIMULTANEOUSLY
1. Connect to two devices at the same time through the RCA connector on the back of the subwoofer
andthe 3.5mm cable on the subwoofer.
2. To switch between audio sources just pause audio on one connected device and play audio from the other
connected device.
1 2
1
ADJUST THE VOLUME
1. Adjust the volume of Z333 with the knob on the control pod.
Turn the knob clockwise (to the right) to increase volume.
Turn the knob counter-clockwise (to the left) to decrease volume.
ADJUST THE BASS
2. Adjust the bass level by turning the bass control knob located at the back of your subwoofer.
Turn bass knob to the right for deeper bass or to the left for less bass.
2
- + BASS
BASS