LogTag LTI-WM-WiFi User manual

Version A
www.logtagrecorders.com
Quickstart Guide

What’s Included 3
Downloading the Connection Wizard 4
Running the Connection Wizard 5
Connecting to your WiFi Network 6
LogTag Online 9
Registering a new device 10
Creating a Location 11
Physical Installation 12
Uploading Results to LogTag Online 13
Viewing Results 14
Quickstart Guide Contents

Page 3
What’s Included
Please check you have each of the items shown below before
continuing with setting up your LTI-WM-WiFi.
LTI-WM-WiFi USB Cable
x1 Adhesive strip USB wall charger
(US customers only)
Note: The LTI-WM-WiFi is only compatible with some loggers.
Please refer to LogTag website for the latest compatibility models.

Page 4
Downloading the Connection Wizard
Your LTI-WM-WiFi requires you to connect it to your WiFi Network.
To do that, we have an easy tool for you to use called the LogTag
Online Connection Wizard.
To download the LogTag Online Connection Wizard, please open
your browser and type the link below to begin the download:
https://logtagrecorders.com/download/connectionwizard.exe
If you have issues with the link above, you can download the .zip
version instead and ensure you unzip the file before running it via
the link below:
https://logtagrecorders.com/download/connectionwizard.zip
Firstly, connect your LTI-WM-WiFi
to your computer via the USB
cable provided. The USB socket
on the device is located at the
bottom of the interface cradle.
Warning: Please ensure no other LogTag software is currently
running on your computer before running the Wizard software.

Page 5
Running the Connection Wizard
This software doesn’t require any setup or installation. Simply
double-click the connectionwizard.exe file that you downloaded.
The first page of the Wizard will be displayed.
When you’re ready to begin, click “Start”.
Easy Setup will be
selected by default.
Keep this option
checked and click
“Next”.
You will be asked to sign in to your LogTag Online account. If you
do not have an account, click the link below or alternatively, open
your browser, type the following link into the address bar and follow
the on-screen instructions.
https://logtagonline.com/signup
or click Create a LogTag Online Account link.
You have now created your account and is now ready to set up
connection of your LTI-WM-WiFi to the WiFi network.
You have now created your account and is now ready to set up
connection of
y
our LTI-WM-WiFi to the WiFi network.
Please ensure there is an internet connection on your computer
prior to starting this process.
Please ensure there is an internet connection on
y
our com
p
uter
prior to startin
g
this process.

Page 6
Connecting to your WiFi Network
Type your LogTag Online account details and click “Sign In”,
followed by “Next”.
The Wizard will now scan
for any connected LogTag
devices.
If the scan doesn't find any
devices, double-check the
device is plugged in to your
computer with the USB cable
provided and click “Scan
Again”.
As soon as a device has been
identified, it will appear in the
table (left) and automatically
register that device to your
LogTag Online account.
The Status will turn green with
the text “Registered” once
complete.
Click the “Next” button once you are ready.

Page 7
1
23
4
1. Click the Network Name and your WiFi device will begin
searching for nearby Wireless Networks.
Note: This process can take up to 2 minutes, please wait whilst
the network scan is in progress.
2. Once you have selected your WiFi Network from the list, type
the password for the network. Remember that passwords are
case-sensitive.
3. (Optional) Once you have typed your password, you can
click the eye icon to reveal the password. Incorrectly typed
passwords is one of the most frequent reasons why device
setup fails.
4. Once you have selected your WiFi Network and typed the
password, click “Next”.
Note: Some WiFi Networks won't appear in this list for security
purposes. If you are aware that your network is one of these, you
can manually type the name of your network (SSID) in the
Network Name field instead of clicking the menu arrow.

Page 8
The device is now being configured with the WiFi details you
provided in the previous screen, which typically takes 10 seconds.
The Connection Wizard is now checking that the LTI-WM-WIFI can
connect to your WiFi network and to LogTag Online.
1. Once the Wizard displays “Connection Succeeded”, click
“Next” to complete the Wizard.
2. Click “Close” to close the Wizard or click the ‘LogTag Online
Sign In page’ link to take you to LogTag Online website.
Note: The blue network LED flashes on LTI-WM-WiFi once
connection is successful. If the red network LED is flashing, please
refer to the product user guide for troubleshooting.

Page 9
LogTag Online
LogTag Online is a secure online service that stores the data
recorded from your logger against your account.
Signing in to your LogTag Online Account
Open your browser and navigate to: https://logtagonline.com
1. Type your Email and
Password
2. Then click “Sign In”.
3. Upon signing in,
you will see the
Dashboard.

Page 10
Registering a new device
After you have docked a logger into LTI-WM-WiFi, it will
automatically register the logger in LogTag Online and show in the
Recently Registered Devices section on the dashboard in LogTag
Online.
• END OF PAGE

Page 11
Creating a Location
To create a Location, click the green “Add a Location” button from
the Locations page.
This process is easier if your logger is registered prior to creating
a location.
In order to use the real-time data feature of the LTI-WM-WiFi, you
will need to create a Location after registering your device.
For more information on completing the fields, or to edit/delete
Location please refer to the LogTag Online user guide.
Tip: You can pin/unpin a Location to your dashboard by clicking
the small “plus/minus” icon in the top right corner to show real-time
data from the logger in LogTag Online.
This process is easier if your lo
gg
er is re
g
istered prior to creatin
g
a
locatio
n.

Page 12
Physical Installation
Setup of your LTI-WM-WiFi is
complete, to install the LTI-WM-WiFi:
1. Un-clip the interface from the
mount base.
2. Mount base with adhesive strip
or screws on a flat surface at
your preferred site.
3. Clip back the interface onto the
mount base
4. Plug in USB power cable
Make sure the USB cable from the LTI-WM-WiFi can reach
the USB wall charger comfortably without obstruction.
Note: Ensure the mounting surface is clean and dry before
installing.

Page 13
Uploading Results to LogTag Online
The red ‘Busy/Error’ LED is
permanently on while the
data is being downloaded
from the logger.
To upload your logger’s data to LogTag Online, simply dock it into
the LTI-WM-WiFi.
The blue ‘Network’ LED rapidly
flashes to indicate it is in the
process of uploading data to
LogTag Online cloud.
When the upload of
data from the logger is
complete, amber and
blue lights flash at the
same time to indicate
real-time temperature
upload is active.
Please ensure your logger has started prior to docking it into the
interface.
Pl
ease ensure your
l
o
gg
er
h
as starte
d
pr
i
or to
d
oc
ki
n
g
i
t
i
nto t
h
e
i
n
te
r
face
.
The green ‘Ready’
LED is permanently
on to indicate it is
ready to accept a
logger.
‘Ready’ LED ‘Network’ LED ‘Busy/Error’
LED

Page 14
Viewing Results
If the logger is not attached to a location, browse to LogTag Drive
at the bottom of the dashboard to view data online along with
options to share, edit and delete the data on your account.
To view your data, sign in to your LogTag Online account.
For any pinned location you can see a snapshot of the data
collected. To view the data in more detail, click on the miniature
chart or click “Inspect”.
For any locations that are not pinned to the dashboard, click
“Locations” and select the location you wish to see in more detail.

Page 15
For more information or support, please
contact your LogTag Distributor.