Loll Designs NO. 9 CHAIR & ROCKER User manual

Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
2x
P4
1x
P5-a
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
CHAIR & ROCKER
1.
2.
3.
5.
4.
ASSEMBLY TIPS:5 Important Points You NEED to Read
Prior to beginning assembly, please inspect and inventory the parts to make sure
you have everything and that nothing was damaged during shipping. If damage has
occurred, please take photos and go to lolldesigns.com/damage. Rest assured we’ll
get it taken care of straight away!
To avoid scratching furniture, assemble on a clean soft surface like a blanket, carpet, or
the attened cardboard box the furniture was shipped in.
Start all bolts by hand to ensure proper alignment and to prevent cross threading.
Then using the Allen Key or Loll Tool, tighten until you feel resistance.
Bolts should not be forced, but some components, particularly the blocks will need a bit
of muscle to get them together as they are machined for a snug t. If parts are still not
going together, please send us a photo of the part you are having trouble with.
You can use a cordless screw gun if you have one and know how to use it. Set the
clutch setting at low to medium torque. We do not recommend using an electric drill
without a clutch to install bolts as you can easily overtighten and damage the product.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
LOLL TOOL
Locate the box marked
“Tool Included” before
beginning assembly.
RECYCLE THE PACKAGING
We’ve gone through great lengths to make as much of our packaging as possible recyclable.
The cardboard box, paper wrap, ller and paper bags can all go in your recycling bin. The
muslin hardware bags replaced plastic bags with the intention of reducing plastic and
encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL
For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos
For product care & maintenance, visit www.lolldesigns.com/care-maintenance
For further lollygagging assistance, please reach out!
[phone]
[email protected]
5912 Waseca Street
Duluth, Minnesota 55807
BLOCK & BOLT INSTALLATION
Insert bolts through countersunk hole side of blocks
as shown below.
CORRECT INCORRECT
Countersunk
Hole
“Loll Designs inspires people to appreciate the outdoors.”
Greg Benson - Founder/CEO
NO. 9 CHAIR & ROCKER
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side
Right Side
Seat Slats (X3)
(Engraved with "F" for front)
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side
Right Side
Seat Slats (X3)
(Engraved with "F" for front)
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
4x
1/2˝
1x
P1L
1x
P1L
1x
P7L
3x
P3
1x
P6
16x
GB
1x
P5-b
4x
MB
1x
P1R
1x
P1R
1x
P7R
4x
13/8˝
16x
7/8˝
BOLT
HOLES
BOLT
HOLES
*Bolts & Tools shown actual size.
Engraved Lin channel cutout mounts
toward front during assembly.
2¼˝ 2˝
ROCKER ONLY CHAIR ONLY
orange
Back Slat (X3)
Seat Brace (X2)
Mid Seat Brace
Lock Block G (X16)
7/8" Bolt yellow (X16)
Micro block (x4)
1 2
" round head bolt (X4)
top back brace
lower back brace
Left Side Right Side
Seat Slats (X3)
(Engraved with "F" for front)
INCLUDED PARTS
3x
P2

*attach P1R using steps 1-2
Step 1
Step 2 (Micro blocks and
1
2 " bolts)
Repeat steps 1&2 other side
Step 3 Step 4
2x
3x
1x
6x
1
3
2
Rocker Model Only: P7L & P7R
GB
P2
P6
GB
1x 1x
1x
1x
2x
P4 P5-a
P4
P5-b
MB
*if neccessary remove
protective lm from
back of block
*if neccessary remove
protective lm from
back of block
*if neccessary remove
protective lm from
back of block
2x
7/8˝
6x
7/8˝
6x
7/8˝
4x
13/8˝
2x
1/2˝
orange
orange
orange
6x
3x
GB
P3
1xP1L
Engraved L in channel
cutout toward front.
4