LONG-JOIN JL-202 Series User manual

JL-202SERIES THERMO TYPE TWIST-LOCK PHOTOELECTRIC SWITCH
1.Product SummAry
The photocontroller JL-202 series is applicable to control the street lighting, garden lighting,
passage lighting and doorway lighting automatically in accordance with the ambient natural
lighting level.
This product is designed on the basis of thermal - bimetallic structure that provides time delay
over 30 seconds to avoid mis-operation due to spotlight or lightning during the night time. A
temperature compensation system provides consistent performance regardless to the ambient
temperature.
This product provides three twist-lock terminals meeting the requirements of ANSI C136.10-1996
and the Standard for Plug-In, Locking Type Photocontrols for Use with Area Lighting UL773, 4th
Edition, dated Jan.19th, 1995. JL-202 series has been listed by UL Inc for United States and Canada.
2.Ordering Information
*JL-202B - **M - ***12-****U
*: The Model Number;
**: Enclosure Size:
Null = 74dia.x 50mm;
M = 74dia.x 60mm;
H = 84dia.x 65mm.
***: MOV diameter in mm:
12 = 110Jole / 3500Amp;
15 = 235Jole / 5000Amp;
23 = 460Jole / 7500Amp.
****: Photocell Options:
Null = 0.5” photocell with heat sink
U = 1” photocell Deluxe Version
3.TechnicAl DAtA
Model No.
JL-202A
JL-202B
JL-202C
JL-202D
Nominal Rated Voltage
110-120VAC
220-240VAC
208VAC
277VAC
Applicable Volt Range
Nominal +/-10%
Rated Frequency
50/60Hz
Rated Loading
1800W Tungsten, 1000VA Ballast
Power Consumption
1.5VA (Average)
Standard Operate Level
10~20Lx On, 30~60Lx Off
Photocell Size****
0.5” with heat sink (Standard) / 1” (Deluxe)
Ambient Temperature
-40℃~ +70℃

Related Humidity
99%
Overall Dimensions (mm)
Null: 74dia.x 50 (Clear) / M: 74dia.x 60 / H: 84dia.x 65
**Enclosure Color (M/H)
Gray
Maroon
Blue or Client Request
**Clear Enclosure (Null)
Available
Weight Approx.
62~90grs
Materials:
Enclosure & Lens – High impact UV stabilized Polycarbonate
Base – High impact Polybutylene terephthalate
Photocell – Cadmium Sulfide 0.5” with heat sink (Standard) / 1” (Deluxe)
4.InstAllAtion & OperAtionAl Instructions
Disconnect power; wire the color coded receptacle according to the diagram below.
Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as
indicated on the top of the photocontroller.
Adjust the receptacle position if necessary.
It is normal for the SWITCH to take several minutes to turn off when first installed.
To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.
Do not cover with finger because light traveling through fingers may be great enough to
keep the switch open.
Test will take approximately 2 minutes.
6.Contact us
Shanghai Long-join Intelligent Technology Inc.
Add:2 floor 8 building Donglin Technology Park,No.129 Hulan west
road,Baoshan District Shanghai China. Postalcode 200443
Email: [email protected]m