LONG-JOIN JL-203 User manual

JL-203 THERMO TYPE TWIST-LOCK PHOTOELECTRIC SWITCH
1.Product SummAry
he photocontroller JL-203C series is applicable to control the street lighting, garden lighting,
passage lighting and doorway lighting automatically in accordance with the ambient natural
lighting level.
This product is designed with electronic circuit assisted thermal switch, with sensor of IR filtered
photodiode and a surge arrester (MOV) is available. Its multi-volts feature expands the
application of thermal switch which is powerful to carry high wattage lamp loadings, regardless
the loading in incandescent, ballasted or e-ballasted.
Besides, its time-delay feature might avoid mis-operation due to spotlight or lightning during the
night time.
This product provides twist lock terminals meeting the requirements of ANSI C136.10-2010 and
the Standard for Plug-In, Locking Type Photocontrols for Use with Area Lighting UL773.
2.Ordering Information
JL-203C **12 ***-IP65
*: Model Number;
**: MOV diameter in mm:
12 = 110Joule / 3500Amp
15 = 235Joule / 5000Amp
23 = 546Joule / 13000Amp
***: IP65 Protection (optional)
3.TechnicAl DAtA
Model
JL-203C
Rated Voltage
120-277VAC
Applicable Voltage Range
105-305VAC
Rated Frequency
50/60Hz
Rated Loading
1000W Tungsten, 1800VA Ballast
Power Consumption
1.0VA
Turn-On Level / Time-Delay
10Lx / 15~120s
Turn-Off Level / Time-Delay
60Lx / 2~15s
Ambient Temp.
-40℃~ +70℃
Related Humidity
99%
Overall Size
84(Dia.)x 66mm
Weight Approx.
83g (IP54) / 88g (IP65)

4.InstAllAtion & OperAtionAl Instructions
Disconnect power; wire the color coded receptacle according to the diagram below.
Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as
indicated on the top of the photocontroller.
Adjust the receptacle position if necessary.
It is normal for the SWITCH to take several minutes to turn off when first installed.
To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.
Do not cover with finger because light traveling through fingers may be great enough to
keep the switch open.
Test will take approximately 2 minutes.
6.Contact us
Shanghai Long-join Intelligent Technology Inc.
Add:2 floor 8 building Donglin Technology Park,No.129 Hulan west
road,Baoshan District Shanghai China. Postalcode 200443
Email: [email protected]m