LONG-JOIN JL-403A Quick start guide

PHOTOELECTRIC SWITCH
JL-403
Product Summary
The photoelectric switch JL-103 is applicable to control the street lighting, passage lighting and
doorway lighting automatically in accordance with the ambient lighting level.
This product is designed with electronic circuits. Its quicker response with time delay of 3-10
seconds offers easy-to-test feature. Especially, model JL-403C provides a wide voltage range for
customer applications under almost power supplies.
Further, a preset 3-20 seconds time-delay might avoid mis-operation due to spotlight or lightning
during the night time
This product has been listed by UL Inc and is comply with the Standard for Non-industrial
Photoelectric Switches for Lighting Control UL773A, as well as CE and RoHS certified.
Technical Data
Model No. JL-403A JL-403B JL-403C JL-403D
Rated Voltage 120VAC 240VAC 120-277VAC 277VAC
Rated Frequency 50/60Hz
Rated Loading
1000W
Tungsten,
1800VA
Ballast
Power consumption 2W
Operate Level 10~20Lx On
30~80Lx Off
UL
®
LISTED
C US
RAINTIGHT

Ambient Temperature -40℃~ +70℃
Related Humidity 99%RH
Overall Dimensions 54.5(L) x 29(W) x 42(H)mm
Leads Length 180mm or Customer request (AWG#18)
Installation & Operational Instructions
Installation
Disconnect power, remove junction box cover,
place the SWITCH in knockout hole and
fasten with locknut.
Wire according to the diagram in right hand.
Do not install the switch with the
Photocell facing artificial or reflected light.
This will cause the unit to cycle on and off at
night.
Accessories
²Lock-Nut
2pcs applied.
²
O-ring
Gasket
2pcs applied.
²Alternative Flat Gasket
To take the place of O-ring Gaskets per client’s request.
W
SFS