LONG-JOIN JL-401 Series User manual

JL-401 ELECTRONIC TYPE COIN-TYPE PHOTOELECTRIC SWITCH
1.Product SummAry
The photoelectric switch JL-401 is applicable to control the street lighting, garden lighting,
passage lighting and doorway lighting automatically in accordance with the ambient
natural lighting level. JL-401 provides a wide voltage range for customer applications
under almost power supplies. Further, a preset 15-30 seconds time-delay might avoid
mis-operation due to spotlight or lightning during the night time.
2.Ordering Information
*JL-401C **-R***-IP65****
*Model Number
**A=120V,B=220-240V,C=120-277V.
***
null=integrated
R=draw forth
****Higher waterproofing is available
3.TechnicAl DAtA
Model No.
JL-401A/AR
JL-401B/BR
JL-401C/CR
JL-401D/DR
Rated Voltage
120VAC
220-240VAC
120-277VAC
277VAC
Sensor Type
photo resistance
Rated Loading
6Amp (Max).
Power consumption
5W max.
On-off Levels
On: 10-20Lx
Off: 25-35Lx
Ambient Temperature
-40℃~ +70℃
Related Humidity
96%RH
Body Dimensions
45(L) x 45(W) x 30(H)mm
Leads Length
180mm or Customer request
Sensor Dimensions
21 x 25mm Dia. [20mm Dia. mounting Hole]
4.InstAllAtion & OperAtionAl Instructions
Disconnect power; wire the color coded receptacle according to the diagram below.
Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as
indicated on the top of the photocontroller.
Adjust the receptacle position if necessary.

It is normal for the SWITCH to take several minutes to turn off when first installed.
To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.
Do not cover with finger because light traveling through fingers may be great enough to
keep the switch open.
Test will take approximately 2 minutes.
6.Contact us
Shanghai Long-join Intelligent Technology Inc.
Add:2 floor 8 building Donglin Technology Park,No.129 Hulan west
road,Baoshan District Shanghai China. Postalcode 200443
Email: [email protected]m