LONG-JOIN JL-205C User manual

JL-205 ANALOG ELECTRONIC TWIST-LOCK PHOTOELECTRIC SWITCH
1.Product SummAry
The photocontroller JL-205 series is applicable to control the street lighting, garden lighting,
passage lighting and doorway lighting automatically in accordance with the ambient natural
lighting level.
This product is designed with electronic circuits with sensor of phototransistor and a surge
arrester (MOV) is provided. Its quicker response with time delay of 10-30 seconds offers easy-to-
test feature. Especially, model JL-205C provides a wide voltage range for customer applications
under almost power supplies.
Further, a preset 5-30 seconds time-delay might avoid mis-operation due to spotlight or lightning
during the night time.
This product provides twist lock terminals meeting the requirements of ANSI C136.10-1996 and
the Standard for Plug-In, Locking Type Photocontrols for Use with Area Lighting UL773, 4th Edition,
dated Jan.19th, 1995,
2.Ordering Information
JL-205C **12 ***-IP65
*: Model Number;
**: MOV diameter in mm.
12 = 110Jole / 3500Amp;
15 = 235Jole / 5000Amp;
23 = 460Jole / 7500Amp.
***: IP65 Protection (optional)
3.TechnicAl DAtA
Model
JL-205A
JL-205B
JL-205C
Rated Voltage
110-120VAC
220~240VAC
110-277VAC
Applicable Voltage Range
100-140VAC
200~260VAC
105-305VAC
Rated Frequency
50/60Hz
Rated Loading
1000W Tungsten, 1800VA Ballast
Power Consumption
1.5VA
On/Off Level
6Lx On
50Lx Off
Ambient Temp.
-40℃~ +70℃
Related Humidity
99%
Overall Size
84(Dia.)x 66mm
Weight Approx.
85 grs

4.InstAllAtion & OperAtionAl Instructions
Disconnect power; wire the color coded receptacle according to the diagram below.
Push the photocontroller on and twist it clockwise to lock it into the receptacle.
Install the photocontroller with the Photocell facing the NORTH direction as
indicated on the top of the photocontroller.
Adjust the receptacle position if necessary.
It is normal for the SWITCH to take several minutes to turn off when first installed.
To test “turn on” during daytime, cover its eye with sliding the metal strip mounted.
Do not cover with finger because light traveling through fingers may be great enough to
keep the switch open.
Test will take approximately 2 minutes.
6.Contact us
Shanghai Long-join Intelligent Technology Inc.
Add:2 floor 8 building Donglin Technology Park,No.129 Hulan west
road,Baoshan District Shanghai China. Postalcode 200443
Email: [email protected]m