LoRa Alliance YO Pulse User manual

Pulse
1. Mount the device on a 35 mm DIN rail.
2. Connect the inputs to the individual channels of the device
according to the polarity shown on the enclosure label.
1
Quick Installation Guide
4
Version 1 - February 2021

32
3. Screw the power supply wires to the device (100~240 VAC 50/60 Hz). 4. Statuses, colours and behaviour of the diodes:
B. 6x orange status LED indicates contact status.
A. LoRaWAN diode (if the device is properly connected):
In case of problems, the device can be reset with the “Reset” buon.
Device is working correctly (power and memory) - GREEN colour
Device is working incorrectly (power and memory) - RED colour
LoRaWAN frame sent - single WHITE ash
Conrmaon from server aer receiving the frame - single WHITE ash
Frame failed to conrm within specied meout - single RED ash
LoRaWAN Disconnected - ashing BLUE
Connecng to BLE - ashing BLUE