Lorex SG7518 User manual

Please read Manual before Use
SYSTEM INCLUDES: COLOR NIGHT VISION
CAMERA WITH 6FT CABLE, MOUNTING BRACKET
AND 57FT. CABLE
It’s all on the web
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
www.lorexcctv.com
VISIT MODEL:
SG7518
www.lorexcctv.com
ACCESSORY INDOOR / OUTDOOR
NIGHT VISION COLOR CAMERA KIT
Instruction Manual
Copyright © 2006 Lorex Technology Inc

FEATURES
Technical Specifications:
•Image Device: 1/4” CCD Sensor
•Picture Elements: 510 H x 492 V
•Lens: 6 mm
•Resolution: 350 TV Lines
•Illumination: 0 LUX @ F2.0
•Power Requirement: powered from monitor via cable
•Operating Temperature: -14°F - 122°F (-20ºC to 50ºC)
•Dimensions: 2.1”(W) x 3.2”(D) x 2”(H)
•Weight: 12 oz
Because our products are subject to continuous improvement, SVII
and it’s subsidiaries reserve the right to modify product Design and
Specifications without notice and without incurring any obligation.
E & OE.
•Color Indoor / Outdoor Camera
•1/4” CCD Color Image Sensor
•Listen-in way Audio
•Compatible with all Lorex, Sylvania and Sentinel CCTV
Observation Systems
•6mm angle lens
•Infra-red illuminators ideal for low light viewing (B&W
video in low-light
CAMERA INSTALLATION
TROUBLE SHOOTING
Make sure the camera is not facing
Any direct Light or Sunlight
Picture Flickering
Check the cable for any loose
connection
No Picture
REMEDYPROBLEM
Keep camera installed away from direct sunlight.
Also avoid places where humidity is high or
unable to protect rain. The mounting bracket must
be attached to a structural device such as wall stud
or ceiling rafter using suitable fastener.
NOTE
For more information, please visit our website at
www.lorexcctv.com
1) Attach the Camera to the Metal Bracket and tighten
the swivel.
2) Connect the supplied extension cable to the back of the
camera.
3) Attach the metal stand to the wall or ceiling where
you want to install the camera. Locate a wall stud
or ceiling joist and secure bracket using the supplied
screws.
4) Connect the other end of the cable to the back of the
monitor.