Lorex VANTAGE CVC7575 Series User manual

Copyright © 2011 Lorex Technologies Inc.
As our products are subject to continuous improvement, Lorex reserves the right to modify product design,
specifications and prices, without notice and without incurring any obligation. E&OE
2.6"/
66mm
Cable Extension Options
Problem Solution
No Picture/Signal • Ensure your TV is on the correct input channel.
Common terms of an input channel: INPUT, AV
CHANNEL, LINE1, LINE2, AUX.
• If your camera is connected to a VCR/DVR,
ensure it is properly connected to your TV/
Monitor.
• Ensure connections are properly connected.
• Ensure the camera power supply is plugged in.
Picture is too bright • Ensure your camera isn’t pointed directly at a
source of light (e.g sun or spot light).
• Slide the sunshade (bullet cameras featuring
adjustable sunshades only) forward to block
excess light.
• Move your camera to a different location.
Picture is too dark • If using during the day, the camera may not be
getting enough light. Slide the sunshade (bullet
cameras featuring adjustable sunshades only)
backwards to let in more light.
• Check the brightness and contrast settings of the
device your camera connects to (TV/Monitor/
DVR).
Night Vision is not
working
• The night vision activates when light levels drop.
The area may have too much light.
Picture is not clear • Check the camera lens for dirt, dust, spiderwebs.
Clean the lens with a soft, clean cloth.
• Make sure that the cable run is within the
limitations specified in the section ' Cable
Extension Options'
Bright spot in video
when viewing cam-
era at night
• Night vision reflects when pointing a camera to
a window. Move the camera to a different
location.
BNC connection
does not connect to
my TV
• Use a BNC to RCA adapter at the end of the
extension cable.
Troubleshooting
Option Cable Type
1Regular BNC
(supplied with
camera)
180ft / 55m 3
2'RG59' or 'Coax'
or ' Coaxial' BNC
(sold separately)
300ft / 92m 5
3Lorex Universal
Cable
(sold separately)
300ft / 92m 3
Max. Cable
Run Distance
Notes:
1. For optimal performance, consider using option 2 or 3. Preference for using
the same cable type for the entire distance.
2. Cable run recommendation based on typical camera power consumption
(up to 500mA). For specialty cameras with higher current consumption,
maximum cable run may be reduced. Consider providing power to the
camera at the camera side rather then at the end of the extension cable.
3. Indicators that your cable run may be too long:
• Video is permanently Black & White (even during day time)
• Video is distorted
Max. # of
Extensions
www.lorextechnology.com
Extend the cable run for your camera up to 300ft or more
depending on the cable type used. See table below:
4.2"/
107mm
*IR Illumination range under ideal conditions. Objects at or beyond this range may be partially or
completely obscured, depending on the camera application.
SUPER RESOLUTION WEATHERPROOF
NIGHT VISION SECURITY CAMERA
English Version 3.0
QUICK START GUIDE
Image Sensor 1/3" Color Image Sensor
Video Format NTSC
Effective Pixels H: 720 V: 480
Resolution 600+ TV Lines
Scan System 2:1 Interlace
Sync System Internal
S/N Ratio 48dB (AGC Off)
Iris AES
AES Shutter Speed 1/60 ~ 1/25,000 Sec.
Min. Illumination 0.1 Lux without IR LED
0 Lux with IR LED
Video Output Composite 1.0Vpp @75 ohm
Lens / Lens Type 3.6mm F2.0 / Fixed
FOV (Diagonal) 78°
Termination BNC Type
IR LED Qty / Type 18 pieces / 850nm
Night Vision Range* 60ft / 18m
Power Requirement 12V DC ±10%
Power Consumption Max. 240mA (w/IR)
Operating Temp. Range –22° ~ 122°F / –30° ~ 50°C
Operating Humidity Range < 90% RH
Environmental Rating** IP66
Weight (including stand) 0.6lbs / 0.3kg
5.2"/
132mm
Product Information
User Manuals
Quick Start Guides
Specification Sheets
Software Upgrades
Firmware Upgrades
**Not intended for submersion in water. Installation in a sheltered location recommended.
CVC7575 Series
WWW.LOREXTECHNOLOGY.COM
Camera Specifications

Contents
• Super Resolution with enhanced optics delivering crystal clear video at
600 TV lines of resolution
• Reliable camera operation coupled with patented ImageCool™
technology ensures optimal performance in extreme temperatures
(–22° ~ 122°F / –30° ~ 50°C)
• BrightNight viewing with enhanced low light image sensor
• Close-up recognition at night with auto light compensation prevents
wash-out effect
• Anti-glare feature ensures clear images under strong lighting conditions
• Accurate colors with Lorex‘s automatic light filtering technology
• 3.6mm wide-angle lens captures a 78° field of view (diagonal)
•Night vision range up to 60ft (18m)1
• Day/Night mode: Picture automatically switches to B&W delivering
better clarity in low light conditions
•Weatherproof Design: ideal for outdoor & indoor applications (IP66)2
• Integrated 3ft camera cable for flexible installation and protection from
the elements
• Versatile mounting options: ceiling, counter or wall mountable
• 60ft BNC/Power extension cable included per camera
• Energy-efficient CEC (California Energy Commission) compliant power
adapter included
• IR Night Vision Camera*
• Mounting kit*
• 60ft BNC/Power Extension Cable*
• Power Adapter**
Installation Tips
• Point the camera where there is the least amount of obstructions (i.e.
tree branches).
• Install the camera in a location that is difficult for vandals to reach.
• Secure cabling so that it is not exposed or easily cut.
• Camera rated for outdoor use. Installation in a sheltered location
recommended.
Installing The Camera
Warning / Caution
1. Read this guide carefully and keep it for future reference.
2. Follow all instructions for safe use of the product and handle with care.
3. Use the camera within given temperature, humidity and voltage levels noted
in Camera Specifications.
4. Do not disassemble the camera.
5. Do not point the camera directly towards the sun or a source of intense light.
6. Use only the supplied regulated power supply. Use of a non-regulated, non-
conforming power supply can damage this product and voids the warranty.
7. Periodic cleaning may be required. Use a damp cloth only. Do not use harsh
cleaners or aerosol cleaners.
8. The supplied extension cable is rated for surface mounting only.
Cables for in-wall / floor-to-floor installations are sold separately.
WARNING - A REGULATED UL/CSA APPROVED power supply is
REQUIRED for use with this camera. Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Connecting The Camera
Disclaimers:
1) Infrared illumination range under ideal conditions. Actual range and clarity may vary
depending on scene/object reflection and camera application
2) Not intended for submersion in water. Installation in a sheltered location recommended.
*Model CVC7575PK4 is a 4-pack that includes four of the listed items.
** A "4-in-1" Power Adapter that provides power to four cameras may be
substituted for four individual power adapters, depending on product
configuration.
Features
To install the camera:
1. Mount the camera stand to the desired mounting surface.
2. Attach the camera to the stand at either of the two
connection points at the back of the camera.
3. Connect the extension cable to the camera:
ATTENTION - Test all connections and ensure the camera is working
correctly prior to permanent installation by temporarily connecting the
camera(s) and cable(s) to the viewing/recording solution.
Wall Mount
Ceiling Mount
Table Mount
Use the stand for ceiling, table, or wall mounting.
Connect the BNC
and power
connectors to the
camera.
Connect the BNC
connector to the video
input of the monitor/DVR,
and connect the included
power connector to a
power adapter.
Male power connector Female power connector
BNC Connector
To Monitor/ DVR:
To Camera:
Setup Diagram
ATTENTION: This camera includes an Auto Mechanical
IR Cut Filter. When the camera changes between Day/
Night viewing modes, an audible clicking noise may be
heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
4. Connect the BNC end of the Extension Cable to the
DVR / Observation System or to a TV/VCR.
NOTE: Connect a BNC-to-RCA Adapter (optional,
Lorex model # BNCB) to connect the extension cable
to RCA inputs (i.e. for a TV connection).
5. Connect the A/C Power Adapter to the 60ft
Extension cable (Black connector). Plug the Power
adapter to a wall outlet.
Connect the BNC cable to a DVR, CCTV monitor, or TV.
AC Power Adapter
4-in-1 Power Adapter
(optional)
Connect an AC power adapter.