1. Package Contents 2. Installing the Camera 3. Connecting the Camera
1. Mount the Camera Base to a Wall or
Ceiling using the provided screws.
2. Position the camera to the desired
direction and angle.
3. Position the Dome Cover over the Ball
Camera and tighten the screws using the
provided Hex Tool
4. Connect the BNC end of the Camera
Cable to the Extension Cable. Connect
the extension cable to an Observation
System, DVR or to a Monitor.
5. Connect the Power end of the Camera
Cable to the Extension Cable. Connect
the extension cable to an AC Adapter.
Plug the adapter into a wall outlet.
Setup Diagram:
1 x 60 ft. extension cable
1 x BNC to RCA Adaptors
NOTE: Test the camera prior to selecting a permanent mounting
location by temporarily connecting the Cameras and cables to the
system or DVR.
1 x Weatherproof Color
Day/Night IR Dome
Camera
1 x Hex Tool for Dome
Cover
1 x AC Power Adapter
1 x Dome Cover
1 x Dome Ring
1 x Camera Base
Features:
• True High Resolution: 1/3” CCD advanced image sensor
produces video with 480 TV Lines and 380K pixels
• Advanced Day / Night mode: Picture automatically switches
camera to B&W delivering better clarity in low light conditions
• 12 IR LEDs provides effective night vision range of 26 ft. (8m)*
• Ceiling or Wall Mountable
• Vandal Resistant Dome Can Withstand Impact from 10lb
Sledge Hammer
• Weatherproof Design: Ideal for Outdoor and indoor
applications (IP67)**
* IR Illumination range of 26 ft. under ideal conditions. Objects at or beyond
this range may be partially or completely obscured,
depending on the camera application.
** Not recommended for submersion in water
You may need to remove the Dome Cover,
Dome Ring and Ball Camera from the
Camera Base by loosening the tightening
screw with the provided Hex Tool.
