LOUQE GHOST S1 Mk III User manual

GHOST S1 Mk III
LQ-GHS103-CA
USER MANUAL (ENG)

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
BOX CONTENT
Top Plate / mounting platform
(for use with TopHat)
T10 torx key
8x M3x6 countersunk
8x M3x4 button head
4x M3x6 button head
4x #6-32 UNC
Ghost S1 Mk III case

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Unscrew the 8 countersunk screws that hold
the grill
• Lift the grill away by pulling the rag tag in the
back
x8

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Unscrew the 4 bottom screws that are holding
down the side panels
x4

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Pull the side panels straight up and put them
aside

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Unscrew the PSU bracket x4

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Screw the PSU bracket onto the PSU using 4
#6-32 UNC screws
• Put the mounted PSU and bracket aside
x4

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Install the motherboard I/O shield (optional)

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Install the motherboard and screw it in place
• Push the Riser cable connector into the PCI-e
port on the motherboard
x4

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
LED+
LED-
PWR SW
PWR SW
• Connect the LED and power switch cables

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Connect the power cables needed to the PSU
and feed them to the approximate position
• Screw the PSU bracket back in place
• Connect the 24-pin power cable to the
motherboard and the CPU power (if needed)
x4

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Unscrew the GPU cover plate
• Remove the bottom at nut
x2

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Mount the GPU and xate it by screwing the
bottom at nut in place
• Slide in the GPU cover plate in place and screw
it tight with the top at nut
• Connect PCI-e power cables if needed
x2

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Slide down the side panels

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Fix the side panels to the case with countersunk
screws from the bottom x4

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com
GHOST S1 Mk III USER MANUAL
ILLUSTRATION
ASSEMBLY STEPS SCREWS
• Screw the grill onto the case using 8 countersunk
screws
x8

LOUQE AB
Designed in Sweden
[email protected] www.louqe.com