Lovencare RCS 03 User manual

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
SERENO COT
RCS 03

Congratulations on your new quality Love N Care product from our exclusive range of baby products.
Your new product has been manufactured to comply with the Highest Quality Standards and comes
with a 12-month warranty.
As you will soon learn there are many more great features about your new Love N Care product.

This cot has been designed for a child up to 25kg
Do not leave your child unattended when the dropside is in the lower position
RECOMMENDED MATTRESS SIZE: This cot has been manufactured for use with a mattress which measure
690mm wide by 1300mm long and 100mm in thickness.
sides and ends of the cot will not exceed 40mm. This is to minimize the risk of a childs limb becoming
is greater than 500mm with the mattress base in the lower position to minimise the risk of a child climbing
or falling out of the cot.
WARNING TO PREVENT FALLS, THE MATTRESS BASE OF THIS COR SHOULD BE ADJUSTED TO THE
LOWEST POSITION BEFORE THE CHILD CAN SIT UP.
The manufacturers assembly instructions must be followed in detail to ensure all the safety features of the
cot are not compromised.
Please ensure that the cot is placed at a reasonable distance from curtains, blinds, heaters and power points.
Please keep medication, string, elastic,small toys or small items, such as money out of reach from any
position in the cot.
WARNING: TO PREVENT FALLS, THE MAXIMUM MATTRESS THICKNESS SHOULD NOT EXCEED 100mm.
Safety guidelines and instructions must always be followed before making use of this product,
please retain these instructions for future reference.
This product complies with product standard:
AS/NZS 2172:2003 Cots for household use - Safety Requirements
WARNING

Hardware Kit

Parts List
Dropside
Fixed Side
Base
Cot End
Cot End
Caster Wheels

Assembling Cot
If placing the base in the lower position fill in the holes with the capping nuts
#2. Tighten with the allen Key
If base is in lower position
fill these gaps
If Base is in lower position
fill in these gaps.

Attach the base between the cot ends, and insert the 4 (1# ) bolts. Do not tighten
completely yet. Insert 4 (4#) castor wheels on the legs of the cot ends.

Insert the 4 (3#) bolts to attach the fixed side to the cot ends.
Tighten with the Allen Key but not completely.

Insert the 2 (5#) screws into the top position shown on the cot ends.
Tighten with the Allen key.