Lovibond SD 60 REDOX User manual

SD %= pH
SD 60
REDOX
Lock/Unlock Data!
C. Backlight ON/OFF
____________________________________________________________________________________________
Note: Icons/Characters in RED meaning "BLINK"
: Hit once / : Press and hold / : Release
3
F. Store Data
1. In lock mode: 2s
2. In measurement mode: 2s (or 2s )
3. When the storage is full, it will overwrite the oldest data.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
G. System Setup
Menu selection:
2s (latest memory#)
(7.00 or 6.86) (dd-mm-yy/24hr or mm-dd-yy/12hr) (°C or °F)
(31-12 24 or 12-31 12ampm) .....
To enter:
!
MEASUREMENT
ORP CALIBRATION
Characters in RED represent “Flashing symbols“.
Remove protective cap from the probe
D. Store Data
Press
Press for
3 seconds
Press and
hold
+
+
+
1 2 3
4 5 6
+
-
--
-
Insert the batteries
unlock
off
off
unlock
off
Automatically turns off after 20 minutes of
inactivity.
Possible slight delay after pressing
before freeze of the data (!).
After 3 sec. the file no. temporarily appears
on the display, e.g. 01.
Once the storage has reached max. capacity,
the data will overwrite the oldest files.
off
lock
on
on
• Re-Calibrate according to individual recommendations! Rinse the electrode
with distilled water after each measurement.
• Choose Orbeco-Helilge ORP Standard Solution
Remove protective cap from the probe.
Power ON (see A)
Immerse the probe
into calibration
solution.
E. Calibrate ORP
To decrease (-):
Adjustment +
∞
∞
To increase (+):
Max. ± 150 mV of window:
!
wait ( indicates “user calibrated“)
to store

lV. Set Data/Time display type
VI. Electrode Replacement
SETUP
I. Recall Data
II. Set Date and Time
Ill. Set Temperature system (°C/°F)
3 sec
3 sec
3 sec
3 sec
3 sec
3 sec
3 sec
Minutes
Minutes
24 h
AM
PM
Hours
Hours
Year
Year
Month
Day
Day
Month
F. System Setup
Unfreeze data first (see frontside B) before Menu selection.
Delete stored data.
Automatic Exit
Select V. `Set Data/ Time display type‘ first.
to increase (+);
am/pm 12 hour clock
24 hour clock
new electrode
to decrease (-)
am/pm
12 hour clock
or 24 hour
clock
Adjustment:
1x
2x
3x
Press for
further files. Exit
Exit
Exit
Exit
Exit
°C °C
select select
°F
123
4 5 6
Content
1 REDOX/ORP Meter SD 60 in
a robust plastic case
2 Batteries
1 Instruction Manual
Code: L1948 01
Accessories
4000-06 Battery CR 2032 (2 Batteries required)
L194821 Replacement electrode
L384801 Beaker, 100 ml
L195070 Standard solution
SD60 ORP Specication/Features
Characters in RED represent “Flashing symbols“.
Recall Data
go to l.
Set Temperature
go to lV.
Set Data/Time display
type go to V.
Set Date and Time
go to lll.
To enter.
3x
2x
1x
3 sec