LOXONE Touch Pure Air Series User manual

Information
Contains FCC ID: COR-ZWIR4512AC1
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation
Technical Specifications
Ambient Temperature -20...60°C / -4...140°F
Dimensions 90x90x11mm /
3.54x3.54x0.43” (LxWxH)
Maintenance & Cleaning This device is free of main-
tenance and may only be
cleaned with a dry cloth.
Power Supply CR2450
Safety Protection IP40
Capacitive Touch 5 Touch points
Humidity Detection Range
Temperature Detection Range -40...125°C / -40...257°F
+/- 0.5°C /0.9°F
0...100% r.H. +/- 2%
(non condensing)
Radio Frequency 868MHz (SRD Band Europe),
915MHz (ISM Band Region 2)
max. Power 3.16mW
Loxone Electronics GmbH
Smart Home 1
4154 Kollerschlag
Austria
loxone.com
Need Help?
loxone.com/support
V251119
Part No: 100206 (White)
Part No: 100208 (Anthracite)
Touch
Pure
Air

About the product
The Loxone Touch Pure has five touch zones, which can be
configured according to your needs. The large central touch
zone is ideal for controlling lighting, whilst the corner zones are
handy for controlling music and blinds, for example.
Features
• 5 touch buttons
• Temperature & Humidity sensor
• Optional click feedback
Installation
Install the mounting frame on the desired installation place.
Power up the device with the provided battery and pair it with
your Miniserver in Loxone Config. To finish the installation
attach the Loxone Touch on the mounting frame.
For additional information, declaration of confirmity,
visit www.loxone.com/help/touch-pure-air
Learn
Button
Battery
1
2
5
4
3
Touch
Buttons
Status
LED
This folder is a part of the product!