LST Orbis RB-10004 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
RB-10004_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Detector Base Series ORBIS
RB-10004 with Relay Output
Description
Specifi cations
The Detector Relay Base RB-10004 with integrated
relay output is designed for the easy connection of au-
tomatic detectors Series ORBIS. Due to its robust multi-
wire screw terminals, the detectors can be wired with
ease, thus achieving a secure and durable connection.
In addition, a relay output with a dry change-over contact
is integrated into the detector base. The relay output is
activated through the alarm activation of the inserted
detector and remains active until the alarm is reset on
the fi re detection control panel.
The base has been designed for surface mounting in
dry rooms. For special applications a range of acces-
sories (for moist room, false ceiling or fl ush installation)
is available.
A mechanical theft protection of the detector can
optionally be activated at the detector base.
Operating voltage Supply through the detector line voltage
Current consumption 7mA (active)
Contact rating 1A at 30VDC
Ambient temperature - 40°C to +70°C
Relative humidity 10 – 98% (no condensation)
Dimensions ø × H 100 × 24 (mm)
Colour white
Weight 80g
Order number 246041
Order name Detector Relay Base/Conv./ORBIS/Apo RB-10004
• Suitable for automatic detectors in
conventional technology
• Relay output with dry change-over
contact
• Screw terminals for secure
connection of multiple wires
• Mechanical theft protection can be
activated