LST Series 200 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
MS-ZBH-Sys_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
fi g. A
fi g. D
fi g. E
fi g. C
fi g. B
Detector Base Accessories
Series 200/300
• Wet base shroud
• Surface mounting kit
• Detector base adapter
• Recessed mounting kit for fl ush
mounting in false ceilings
• Detector mounting bracket
Surface mounting kit
The surface mounting kit (fi g. B) is used for surface
mounting of the Detector Bases B501, B501DG,
B401RM, B524IEFT-1, B524FTXE, B524HTR and
B524RTE. It allows to easily insert cable conduits or
thick cables and it is prepared for PG screw connec-
tions.
Dimensions ø × H 103 × 34 (mm)
Colour cream
Weight 90g
Order number 246009
Order name Surface Mounting Kit/SS SMK400
Specifi cations
Wet base shroud
The wet base shroud (fi g. A) is used for moist room
mounting and accommodates the Detector Bases
B501, B501DG, B401RM, B524IEFT-1, B524FTXE,
B524HTR and B524RTE. It is prepared for PG screw
connections.
Specifi cations
Dimensions ø × H 105 × 70 (mm)
Colour cream
Weight 100g
Order number 249012
Order name Wet Base Shroud/SS WB1

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
MS-ZBH-Sys_DBL_LST_EN_0804.PDF • PAGE 2
ABuilding Safety. Building Security.
Recessed mounting kit for fl ush mounting
The recessed mounting kit (fi g. D) is used for fl ush moun-
ting of the Detector Bases B501, B501DG, B401RM,
B524IEFT-1, B524HTR and B524RTE in false ceilings.
Dimensions ø × H 144 × 40 (mm)
Colour cream
Weight 90g
Order number 246010
Order name Recessed Mounting Kit/SS RMK400
Detector mounting bracket
The detector mounting bracket (fi g. E) is made of galva-
nised steel sheet and serves for the lateral mounting of
an automatic fi re detector, e.g., in false fl oors, elevator
shafts or shelves. The bracket provides all threaded ho-
les needed for easy mounting of a detector base.
Dimensions L × W × H 130 × 120 × 40 (mm)
Weight 225g
Order number 249044
Order name Detector Mounting Bracket MMW1-1
Specifi cations
Specifi cations
Dimensions ø × H 103 × 5 (mm)
Colour cream
Weight 50g
Order number 246006
Order name Base Adapter/SS MZP500-1
Specifi cations
Detector base adapter
The base adapter (fi g. C) is a supplement to the De-
tector Bases B501, B501DG, B401RM, B524IEFT-1,
B524HTR and B524RTE and allows to safely cover the
mounting area and to compensate an uneven surface.