Ltech F1 User manual

Dimming
2.4GHz
-20℃~55℃
L145×W40×H12(mm)
L150×W46×H18(mm)
85g
3Vdc (Battery CR2032）
Main Characteristics
1
2.4GHz
2.4GHz RF Remote
F1 F2 F3 F4
12 keys remote control.
RF 2.4GHz wireless signal.
Work with F4-3A/F4-5A/F4-CC wireless drivers to control LED fixtures.
EX series touch panel optional.
25 50
75
100
F1
F3
F2
F4
RGB
RG
B
Model F1 F2 F3 F4
RGB RGBW
warranty
5 years
Remote Option
Working Voltage
Wireless Frequency
Working Temperature
Dimensions
Package Size
Weight(G.W.)
Color temperature
Operating Instruction for Remote
Indicator light
On/Off
Brightness-
Brightness
shortcut key
Cancel delay off
Night light mode
Brightness+
Delay off
Scene keys
Short press: play
Long press: save
On/Off
Brightness-
CT-/+
Sunrise
Sunset
Indicator light
Delay off
Brightness+
Daylight
Night-light
Scene keys
Short press: play
Long press: save
Brightness/Speed- Brightness/Speed+
Indicator light
Short press: on/off
Long press: adjust
Saturation
Mode Key
Red/Green/
Blue LED keys
On/Off
Color-/+
Short press: turn on/off
Long press: change the
brightness
Short press: turn on/off
Long press: change the
brightness
Short press: play
Long press: save Short press: play
Long press: save
Scene-mode keys
Mode Mode
1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
5. Static Purple
6. Static Cyan
7. Static White
8.. RGB jumping
9. 7 Colors jumping
10. RGB smooth
11. 7 Colors smooth
1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
5. Static Purple
6. Static Cyan
7. Static White
8.. RGB jumping
9. 7 Colors jumping
10. RGB smooth
11. 7 Colors smooth
12. Static Black
(only turn off RGB)
Indicator light
On/Off
Color-/+
Brightness/Speed-
Mode Key
Brightness/Speed+
Red/Green/Blue/
White LED keys
Scene-mode keys
www.ltech-led.com

2
1. 2.
AA
BB
2.4GHz
Unit：mm
40
43
12
17
145
89
65
Wireless Driver Wireless Driver Wireless Driver
R G B W R G B W R G B W
www.ltech-led.com
Dimensions
Remote
Remote
Touch panel
Holder
Update time:2018.11.09_A0
Wiring Diagram
5-24Vdc 5-24Vdc 5-24Vdc
CV Power Supply CV Power Supply CV Power Supply
Strip Strip Strip
Match/Clear code between remotes
Clear code
Assuming that B match up with A. Short press the
bottom two keys of B simultaneously, the indicator
light keeps on after release.
Then press any key on A in 5 seconds. When the
indicator light of B turns off, match successfully.
Press the bottom two keys of remote simultaneously (about 10 seconds) until the indicator light keeps on,
deactivated the matching successfully.
F series remote can control wireless driver directly, please refer to the manual of wireless driver for match code method.
F series remote can work with EX series touch panel, please refer to the manual of touch panel for match code method.