Ltech WiFi-101-CT User manual

33mm
120mm
20mm
125mm
Product Name :
Model :
Input Voltage :
Out Control：
Current Load :
Output Power :
Network Type :
Working Temp. :
Dimension :
Packing：
Net Weight :
Gross Weight :
WiFi LED Controller
WiFi-101-CT
12 ~ 24Vdc
CT LED Lights
6A Max 12A
(0~72...144W) x 2CH
WiFi 2.4GHz , IEEE 802.11b/g/n
-30℃ ~ +55℃
L125 x W33 x H20(mm)
L127 x W35 x H24(mm)
52g
70g
x 2CH
User-defined lighting mode
Specialized smart home setting
2 CT mode selection
Limitless long-range control
Intelligent lighting timing set
WiFi-101-CT

Product Structure Product Installation Attention
DC Power supply socket
(φ5.5mm x φ2.5mm)
12~24Vdc
power input
LED lamp
connection socket
Long press 6s for
factory reset
Setting key
The running light
Power indicator
LED Strip
220V/110Vac
Power Adapter
WiFi-101-CT
Load power below 240W,
use this round adapter
socket for connection.
★ This manual only applies to this model. We
reserve the right to make changes without
prior notice.
1.
the qualified person.
2.This product is non-waterproof. Please avoid
the sun and rain. When installed outdoors,
please ensure it is mounted in a water proof
enclosure.
3.Good heat dissipation will prolong the
working life of the controller. Please ensure
good ventilation.
4.Please check if the output voltage of the LED
power supply used comply with the working
voltage of the product.
5. Please ensure that adequate sized cable is
used from the controller to the LED lights to
carry the current. Please also ensure that the
cable is secured tightly in the connector.
6.Ensure all wire connections and polarities are
correct before applying power to avoid any
damages to the LED lights.
7.If a fault occurs please return the product to
your supplier. Do not attempt to fix this product
by yourself.
The product shall be installed and serviced by

iOS / Android
2
3
1
我的路由器
邻居的路由 器
邻居的路由 器
邻居的路由 器
Setting WLAN
WLAN
CHOOSE A NETWORK...
My router
Neighbor’s router
Neighbor’s router
Neighbor’s router
3:30 PM
Open WLAN via mobile phone, connect
to the wireless router.
Scan QR Code to download the APP via
mobile phone.
Wireless Router
After installation, the strip flashes within
30s when powered on and then the
controller is ready to the configuration
status accordingly.
Colo r
CT strip
Receive Home Reading TV

4Turn on APP, enter "My Device”
click" "icon.
interface, 5Enter the interface "Network device",
choose "CT light" and follow the prompts
to connect.
www.ltech-led.com
6Once successfully connect to the device
that will immediately open intelligent
life and realize long-distance control via
mobile phone.
Update Time: 2018.01.04_A3